Produktdetaljer
ISBN
9783037859650
Publisert
2014-03-05
Utgiver
Trans Tech Publications Ltd
Vekt
2110 gr
Høyde
240 mm
Bredde
170 mm
Dybde
59 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1170
Redaktør
Collection of selected, peer reviewed papers from the 2014 4th International Conference on Mechanical Science and Technology (ICMSE 2014), January 2-4, 2014, Sanya, Hainan Island, China.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 198 papers are grouped as follows:
Chapter 1: Dynamics of Mechanical Systems: Models and Analysis;
Chapter 2: Machineries and Equipments for Industrial Systems, Energy and Power Engineering, Automation and Control;
Chapter 3: Information Technologies Application for Manufacture, Data Processing and Computational Methods;
Chapter 4: Safety Engineering and Assessment of Reliability;
Chapter 5: Material Engineering and Processing;
Chapter 6: Micro/Nano Technologies and Materials, Quantum Physics Applications;
Chapter 7: Biomaterials and Applied Biotechnologies;
Chapter 8: Environmental Engineering and Waste Recycling;
Chapter 9: Research, Design and Providing of Manufacturing Systems, Engineering Management
Les mer
Selected, peer reviewed papers from the 4th International Conference on Mechanical Science and Technology (ICMSE 2014), January 2-4, 2014, Sanya, Hainan Island, China
- Preface, Reviewers and Sponsors
- Chapter 1: Dynamics of Mechanical Systems: Models and Analysis
- Optimization Design on the Performance of the Shaper
- Modeling and Dynamic Research of the Pneumatic-Hydraulic Loading Simulator System
- Test and Numerical Analysis of Natural Frequency for Tube
- Damage Mechanics-Finite Element Method for Vibrational Fatigue Life Prediction of Engineering Structures with Damping
- Wind Turbine Gearbox Transmission Chain Forced Vibration Analysis Exerted by Random Actuator
- Vibration Characteristics Analysis of Large Dismountable Out-Moving Jaw Crusher
- Excitation Order Research in Bladed-Disk Coupling Resonance Condition
- Driving Intention Based Optimal Shift Control for Automatic Transmission
- Dispersion Curves Calculation for Guided Waves in Rod by Modal Analysis
- Dynamic Characteristics Analysis for Seismic Vibrator
- Finite Element Research on Damping of Viscoelastic Free Layer Damping Sheet
- The Consistency between MLP Method and Modified Method of Multiple Scales for Strong Nonlinear Primary Resonance of Duffing Equation Subject to Harmonic Excitation in Complex Number Field
- Coupling Vibration of Tapered Rod
- Study and Test of Coupled Axial and Transverse Vibrations on Drillpipe for Rotary Drilling Rig
- Resonance Reliability Analysis of Aeroengine Compressor Rotor Blade
- Present Status of Damping Test Techniques for Magnesium Alloys
- Parameter Sensitivity Analysis of Gear Contact in Gear-Bearing-Rotor System Based on Romax
- Investigation of Crack Line Offset of Fracture Splitting Connecting Rod
- Near-Field Noise Prediction for Landing Gear Based on Detached Eddy Simulations
- Fatigue Life Analysis of Auger Stem in Soft Coal Seam
- Research on Walking Principle of a Worm Pipe Robot
- Harvester Threshing Device Parameters Modular Design Based on Solidworks
- A New Way to Simulate the Fluid Structure Interaction between the Bioprosthetic Heart Valve and Blood: FE-SPH Method
- The Temperature Field Analysis about the Thermal Assembly Process of the Roller Sleeve of HFCG160 Roller Press
- Based on ANSYS Large Diameter Metallic High-Speed Rotating Disk Modal Analysis
- The Numerical Investigation of Cracking Areas under Nonuniform Settlements of the Construction
- Simulation and Control of a Duopoly Model
- Topological Optimization for Damping Structure of Cylindrical Shell Based on DIMFM
- Chapter 2: Machineries and Equipments for Industrial systems, Energy and Power Engineering, Automation and Control
- Development of Double-Axis Double-Rest CNC Machining Center
- The Hammerstein Predict Model of Control Valve Based on Least Square Support Vector Machine
- Construction of Computer Controlled Bioreactor
- Study on Detection Method for Crack in Eggs Based on Computer Vision and Support Vector Machine Neural Network
- Genetic Algorithm-Based Optimization of Steam Consumption of Dryer Section in Paper Machine
- Control Characteristics Analysis of Split-Drag-Rudder
- Research on the Relation between Automotive Air Conditioning Supply-Air Direction and Cooling Efficiency about Thermal Field of the Passenger Compartment
- A Study on the Output Characteristic of Photovoltaic Array under Partially Shaded Conditions
- Modelling Solar PV Behavior Using the Interpolation Approach for Climatic Conditions of Eastern India
- Permormance Analysis of Distribution System with Distributed Generation, A Case Study of Nepal
- The Impact of Large Scale Wind Power Integration on a Regional Power Grid - A Case Study
- Experimental Research on Direct Evaporative Cooling of Stainless Steel Filler
- A Case Analysis of Application of Evaporative Cooling Air Conditioning of the Communication Equipment Room in Xi’an
- Design of Dynamic Vehicle Navigation Terminal Based on GPS/GPRS
- Key Technologies Research of MEMS Pressure Sensor for Fuze
- Solution of Energy Supply for Deep Ocean Installations: Design and Testing of a Micro-Fluid Turbine
- Thermal Effect of Dual-Function Solar Collector on Building in Autumn
- Multi-Stage Cascaded Quasi Z-Source Inverter System for Renewable Energy Applications
- The Design of Direct-Drive Wind Generation Grid Side PWM Converter Based on LCL Filter
- Numerical and Experiment Study on New Types of Magnus Blade
- Heat Storage Performance Analysis of Solar Chimney Power Plant System
- Research on the Heat Transfer Characteristics of Receiver in Designed Solar Direct Steam Generation System
- Conceptual Design and Hydrodynamic Performance of a Floating Offshore Wind Turbine Cell-Spar-Buoy Support Structure
- Design of a Small Wind Turbine to Generate Electricity in Urban and Rural Areas
- Energy and Distribution Analysis on Engine Bench
- The Electro-Hydraulic Synchronization Position Servo System Based on Nonlinear and Non-Gaussian Time Sequence Prediction Model
- Three-Ring Gear Reducer Internal Tooth Plate Processing Method in the Research and Analysis
- Research on Smart Grid User Side of Intelligent Detection System for Operating Frequency of Approach Switch
- Comparing Sliding-Mode Control and PID Approaches for Vehicle Stability Control
- Research on Drive Mode for an Independent Eight In-Wheel Motor Drive Vehicle
- Characteristic and Affection Analysis on Air into the Cabin Process Based on Wind Tunnel
- Study on a Novel Excitation Coil Used in Electromagnetic Anti-Wax Apparatus
- A Novel Control Strategy of Active Power Filter
- Performance and Affection Analysis on Cooling Module in the Vehicle Working Conditions
- Study on Adaptive Distance Relay to Prevent Cascading Trips in Complex Power Grid
- Generating Method Considering Magnetic Saturation of SRMG Using Parallel Switching Mechanism
- Studies on the Acoustic Characteristics of the Hartmann Acoustic Generator
- Interference Detection for the Stationary Internal Toroidal Gear Machining
- Application of Mechanical Energy Storage in Micro-Fluid Turbine Design
- Advanced Performance Estimation Model for Lithium-Ion Power Battery Used in Pure Electric Vehicles
- Verification of Control System by Physical Simulation
- Research on the Detail Design of Aircraft Wings
- Exploration of Forecasting the State of Metal Oxide Volt-Sensitive Protectors Based on Improve Recursive Neural Networks
- Based on Vibration and Improved GRNN Identify Eggshell Crack
- Study of Establishment and Operation of Salt-Gradient Solar Pond
- Irradiance and Temperature Dependence Characterization of Vacuum Glass BIPV Modules
- Chapter 3: Information Technologies Application for Manufacture, Data Processing and Computational Methods
- AR Technology and its Application in Biomedical Engineering
- Multi-Radius Density Clustering Algorithm Based on Outlier Factor
- Utilization of Quantization Method on Credit Risk Assessment
- Typology of Online Consumers: Motivations and Clickstream Data
- Seven Factors in Evaluating Recommender System
- A Synthesis Algorithm of Beam-Forming for Antenna Pattern
- An Approach to Group Making Problems Based on Two-Tuple Linguistic Theory
- A Novel Clustering Routing Protocol with Community Structure Detection for Wireless Sensor Networks
- Bioinfo-Kit: A Sharing Software Tool for Bioinformatics
- The Analysis of the Evolution of the Supply Chain and the Corresponding Supply Chain Contract Model
- Two-Dimensional Structural Topology Optimization Based on Isogeometric Analysis
- Studies on Estimation Accuracy of Point Estimation in Up-and-Down Method
- Application of the Least Squares Support Vector Machine Based on Quantum Particle Swarm Optimization for Data Fitting of Small Samples
- Uncertainty Reasoning Problem Research Based on the Expert System of Production Plan
- X-Ray Testing of Weld Defect of Automatic Recognit Ion and Alarm Technology Research
- A Practical Approach Based on Shape from Shading and Fast Marching for 3D Geometry Recovery under Oblique Illumination
- Designing General p-Ary n-Point Smooth Subdivision Schemes
- Rapid Design of Powertrain in Wheeled Combine Harvester Chassis Based on Knowledge
- Research on Recognition of Fertilized Egg Based on Optimized LVQ by Genetic Algorithm
- Two Sharp Perturbed Midpoint Inequalities
- Chapter 4: Safety Engineering and Assessment of Reliability
- Applying KDD to a Structure Health Monitoring System Based on a Real Sited Bridge: Model Reshaping Case
- Prediction of the Fatigue Life for Large Wind Turbine Gearbox
- Artificial Immune Systems Applied to the Analysis of Structural Integrity of a Building
- A Novel Three-Dimensional Cellular Automaton Evacuation Model
- Applied Research on Different Plume Models of Pool Fire in Hermetically Closed Room
- Technical Analysis of Photovoltaic Modules with 20 Years of Tropical Weather Outdoor Exposure
- Preliminary Study on Mine Safety Audit Evaluation Index System
- The Influence of Evacuation Signs on Evacuation for Bad Visibility
- Reliability Analysis of Deploying and Rigid Locking on Truss Element of Space Cable-Strut Deployable Articulated Mast
- Chapter 5: Material Engineering and Processing
- Electrochemical Performance of Hard Carbon as Negative Electrode in Lithium Ion Capacitor
- GC-MS Analyzing of Coal Tar of Lignite Briquette from Low Temperature Pyrolysis
- Thermodynamic Study on the Sulfidation-Magnetic Roasting of the Hematite Type of Tin-Bearing Iron Ore
- Associative Behaviors of a Novel Series of Amphiphilic Statistical Tripolymers
- Effects of Biaxial Pre-Stretching on Microstructures and Mechanical Properties of 2024 Aluminum Alloy Thin Plates
- Characteristics of Microstructure and Microhardness of Friction Stir Welded Joints for AZ31 Magnesium Alloy
- The Higher Order Crack Tip Fields for Anti-Plane Crack in Functionally Graded Piezoelectric Materials
- Comparison Studies of Criado and Coats-Redfern Methods for Co-Gasification of Rubber Seed Shell with High Density Polyethylene Mixtures
- Application of Cationic Cassava Dregs as a Retention and Drainage Aid in Wet-End System
- Cyclic MAM Synthesis and Upconversion Photoluminescence Properties of SrMoO4:Er3+/Yb3+Particles
- Electrochemical Performance Study of LiFePO4 Cathode Material with Different Carbon Coating Contents
- Deep Removal of Methyl Mercaptan in Biogas
- Study on the Creep Properties of Resin Concrete
- A Hydrothermal Factor Calculating Approach Based on FEM for Fiber-Reinforced Composites
- Study on the Failure Analysis Method of the Woven Composite Based on the Micro-Structural Character
- New Approach to Synthesis of CuO/CeO2 Catalysts for Preferential CO Oxidation
- The Simulation and Analysis of the New Type Large Vacuum Container Flange Welding Process
- Prediction of Residual Stress Induced Distortions in Micro-Milling of Al7050 Thin Plate
- The Improvement of Machining Accuracy on Quartz and Glasses by Electrochemical Discharge Machining
- Taguchi Optimization to Determine Optimal Denier of the Polyester Fibre
- Finite Element Method Analysis for Marine Semi-Built-Up Crankshaft Shrinkage Fitting
- The Applications of Mold Flow Analysis on Vibration Separation Technologies of Investment Casting Components
- Pump Ability of Concrete Mixture Improvement Based on Rich Mortar Theory Testing Method
- Chapter 6: Micro/Nano Technologies and Materials, Quantum Physics Applications
- Study on the Ag@SiO2 Enhanced the Luminous Intensity of the Terbium Complexes with Benzoic Acid and 1,10-phenanthroline
- Homogeneous in Distribution of InGaN/GaN Quantum Wells in High Performance GaN-Based Light-Emitting Devices
- Effect of the Sheet Thickness on the Electrochemical Performance of 2-D SnO2 Nanomaterial as Li Ion Battery Anode Material
- Fabrication High Aspect Ratio Nanometer Holes on the Alumina Based on Self-Organization Technology
- Single-Polarization Double Refraction in Plasmonic Crystals: Considerations on Energy Flow
- Generalized Theory of Thermo-Acoustic Emission from Nanocrystalline Porous Silicon
- Preparation and Photocatalytic Activity of Titanium Dioxide-Cuprous Oxide Heterostructure on Graphene
- One Step Growth of Semiconductor CdS Uniform Branched Nanowire on FTO
- Study of MEMS Based Micropyrotechnic Igniter
- Chapter 7: Biomaterials and Applied Biotechnologies
- A Review on Biodiesel Production: Breeding Technologies of Microalgae Containing Rich Lipid
- The Anti-Influenza Activity of Cyclohexene Derivatives Studied by Topological Indices and Neural Network
- The Study of Oxymatrine on Apoptosis of Human Carcinoma Cell Line MGC-803 by Flow Cytometry
- Impact of Liquid Hot Water Pretreatment on the Structural Changes of Sugarcane Bagasse Biomass for Sugar Production
- Mungongo Seeds Oil (Schinziophyton rautanenii) as a Potential Source of Bio-Diesel
- Constituent Characteristic and Biomedical Potentials of Organic Essential Oils from Leaves of Four Eucalyptus Cultivars in China
- The Changes of Ultrastructure and Proteome Induced by Repeated Eccentric Exercise on of Rat Skeletal Muscle
- Antioxidant Activities of Ethanol Extracts from Zanthoxylum avicennae
- Influence of Acute Incremental Exercise on Antioxidation-Endocrine-Immune Network of PM2.5 Exposed Rats
- Influence of Complex Plasticizers Containing Urea and Triethanolamin on the Characteristics of SPI/PVA Films
- Optimizing Experimental Variables to Enhance the Biodegradability of Polylactic Acid
- Analysis on Key Points of Cultivation Techniques for Medicinal Flower and Fruit Plants
- Determination of Antioxidant Activity In Vitro from Hyptis rhomboidea Mart. et Gal. Ethanol Extracts
- Chapter 8: Environmental Engineering and Waste Recycling
- Investigation of Antibacterial Property and Photocatalytic Activity of Recyclable Ag/ZnOw Composites
- Biosorption of Nickel Ions by Modified Chitosan from Aqueous Solutions
- A Selection Optimization Model of Water Pollution Emission Reduction Measures in Refining and Chemical Enterprises
- Assessment of Embodied Carbon Emissions within the Trade between China and Main Trade Partners
- Dynamic Change and Analysis of Driving Factors of Carbon Emissions from Traffic and Transportation Energy Consumption in Jilin Province
- Study on Power Generation Expansion Planning Model Based on CO2 Emission Reduction
- Adsorption of Polyvinyl Acetate (PVAc) Adhesive Emulsion from Aqueous Solution by Lignin-Phenol Based Cationic Surfactant Modified Organic Kieselguhr
- The Strontium Isotopic Chemical Analysis of Geothermal Water in Guihu, Fuzhou
- The Research on Synthetic Method of Starch/Lactic Acid Graft Copolymer Catalyzed with Sulfuric Acid
- Solidification of Greenhouse Gas Carbon Dioxide
- Study on By-Product Synergy and Eco-Industrial Parks in China Based on American Experience
- Study on Protection and Development in Beijing Labagoumen Natural Reserve by GIS
- The Research of Key Factors Influencing Ecological Civilization Consciousness of College Students Based on Ant Colony Clustering Algorithm
- Dynamic Analysis and Prediction of Ecological Footprint in Jilin Province of China Based on Grey Prediction Model
- Emission Reduction Potential Optimization Model on Refinery and Chemical Enterprises for Atmospheric Pollutants Total Amount Control
- Marine SCR Technology’s Development and Prospects
- Discussion on Ship Exhaust Gas Washing Desulfurization Technology
- Catalytic Pyrolysis of Bamboo Residues for Composite Biochar and Bamboo Oil
- Study on the Effect of Adding Zeolite and other Bio-Adsorbance in Enhancing the Quality of the Palm Based Vermicompost
- Chapter 9: Research, Design and Providing of Manufacturing Systems, Engineering Management
- The Effect of Annealing Conditions and Alloying Elements on the Microstructure Stability and Mechanical Properties of Mg-Zn-Cesheets
- Comprehensive Evaluation System Research on Agricultural Modernization Based on Principal Component of BP Network
- A Wind Farm Capacity Credibility Calculation Method Based on Parabola
- Multiple Time-Scale Collaborative Optimal Dispatch Methods for Electric Vehicles and Wind Power
- Research on Rural Finance Efficiency and its Determinants in China Based on 2001 Counties' Data
- Evaluation and Empirical Analysis of China’s Regional “Integration of Informationization and Industrialization”
- Tolerance Optimization for Assembly Systems Based on Quality Requirements Using State Space Model
- Development Process of a Method, Material and Evaluation for Professional Qualification of Employees with Disabilities
- A Study of Process Rebuilding of Asset Life Cycle Management in Power Grid Enterprises Based on MIMS Diagnosis Model
- The Study on Electricity Price Linkage in the Market Including Energy Storage Station in Demand Side
- Research on the 330MW Double-Extraction Steam Turbine of Dynamic and Thermal Characteristics Analysis Model
- Energy Efficiency Evaluation for Steam Turbine and Auxiliary System
- Fuzzy Comprehensive Evaluation on Energy-Efficiency of Plant Boiler Based on Exergy Analysis
- An Exergy and Homeostatic Control Approach to Sustainable Grid-Connected Microgrids without Energy Storage
- Optimization of Unidirectional Material Handling System with Short-Cut
- Research of Innovative Risk Management in L/C Settlement - Based on Quality Control of Import Goods
- The Study of an Economic Hybrid TCSC Structure
- Dynamic Analysis on Energy-Saving Effect of Distributed Cooling System in TBS
- Thermodynamic Analysis of Minimum Extraction Ratio for Coal-Fired CHP Plants
- Integrated Construction Technology of Building Structures with External Thermal Insulation Board
- An Empirical Study of the Investment to Promote the Technological Progress of China's Industrial
- An Portfolio Optimal Attainability under Transaction Costs
- Empirical Study on the Effect of Investment on Employment
- Off-Farm Employment and Outsourcing Production Effects on the Technical Efficiency of Farm Households’ Grain Production - A Case with the Data from Liaoning Province, China
- A Comprehensive Evaluation Approach for Machining Operation Based on Fuzzy AHP
- A Blackboard-Based Architecture for Modular Product Design
- The Relief Modeling and Processing Based on ArtCAM
- Research of Two-Tuple Linguistic in Process of Maintenance on Risk Evaluation for Naval Vessel
- Design and Implementation of Robust Framework for Improvement of Productivity through Total Productive Maintenance in Textile Industry: A Research Article
- Functions of Public Service in the Sustainable Development of Regional Economy: A Case Study of Tianjin
- Experimental Study on the Flow Field Distribution Law of Ultra-Low Permeability Reservoir with Inverted Nine-Spot Equilateral well Pattern
Les mer
Produktdetaljer
ISBN
9783037859650
Publisert
2014-03-05
Utgiver
Trans Tech Publications Ltd
Vekt
2110 gr
Høyde
240 mm
Bredde
170 mm
Dybde
59 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1170
Redaktør