Produktdetaljer
ISBN
9783037858196
Publisert
2014-01-06
Utgiver
Trans Tech Publications Ltd
Vekt
1400 gr
Høyde
240 mm
Bredde
170 mm
Dybde
37 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
736
Volume is indexed by Thomson Reuters BCI (WoS).
The book is a prestigious collection of refereed papers in advanced design, manufacture and related subject areas.
The 161 papers are grouped as follows:
I. Sustainable Development and Technologies;
II. Product/Industrial Design and Design Methodologies;
III. Engineering Design;
IV. Production, Manufacture and Engineering Materials;
V. CAD/CAM/CAE;
VI. Gearing, Mechanical Transmission and Mechanisms;
VII. Machine Condition Monitoring;
VIII. Finite/Boundary Element Methods;
IX. Optimisation, Simulation and Computing Technologies;
X. Manufacturing Informatics;
XI. Robots and Control;
XII. Engineering Management and Enterprise
Les mer
A collection of refereed papers in advanced design, manufacture and related subject areas. It also includes 161 papers that are grouped as follows: Sustainable Development and Technologies; Product/Industrial Design and Design Methodologies; Engineering Design; Production, Manufacture and Engineering Materials; CAD/CAM/CAE; and more.
Les mer
- Editorial and Review Panel Members
- I. Sustainable Development and Technologies
- A Conceptual Model for Sustainable Product Design
- Eco-Design of a Basin Mixer in Geometric Modeling Phase
- Improving Green Product Design with Closed-Loop Product Recovery Information
- Research Trend of Green Design
- Methodology for an Integrated Life Cycle Approach to Design for Environment
- Defining the Social Dimension of Sustainability in Product Design
- Glass Fibre Reinforced Composites from Recycled Polymers
- Structural Analysis of Horizontal Tidal Current Turbine Main Shaft
- Development of Buoy-Type Wave Energy Generating Device
- Environmental Impact Assessment: Challenges in Use of Methods and Tools in France and in Russia
- Comparison of Different Life Cycle Impact Assessment Software Tools
- Case Studies of Taiwan's Fuel Cell System Demonstration Program
- Comparative Analysis of LED Commercial Lighting Systems
- Enabling (Bio) Materials: Feasibility Study for its Implementation in Development of Sustainable Lighting Product
- Assessment of Low Cost, Sustainable, Reflective Layers for Optical Mixing
- Biomimicry: Natural Systems In Situ Analysis, Aimed to Rain Water Harvesting
- Combined Design of a Compact Production System and Services for Sustainability
- Product Innovations and Eco-Sustainability: An Approach to Evaluate the Relationships
- Forming the Nucleus of a Novel Ecological Accounting System: The myEcoCost Approach
- Total Quality Environmental Management Toward Sustainability: Need and Implementation in Libyan Food Industry
- Development of an Online System for Recycling Consumer Electronic Products Using the Internet, NFC and RFID Technologies
- II. Product/Industrial Design and Design Methodologies
- Information Flows and Design Intent in the Core of Future Product-Services in the Field of Manufacturing Industry
- Framework of Man-Machine-Environment Application System Engineering throughout Life Cycle of Large Scale Vessel
- Formalization of Reconfigurable Mechanisms in Task Based Conceptual Design Method
- A Fast Approach of Locating Complex System Design Errors
- Coordination of Design Processes in Two Perspectives of Computer Aided Design
- Application of Baseline in Configuration Management for Aerospace Product Design
- An Ontology-Based Framework for Ergonomics Knowledge Classification and Representation
- A Design of an Optical System of Liquid Filled Lens which can Adjust the Focus
- Prosthesis Analysis Based on TRIZ
- Module Matching Method Based on the Gray Theory
- Factors Influencing Furniture Sales in High-Income Segments of Society
- Graph Based Method for the Modelling of Crumpled Structures
- Study of the Technical Feasibility and Design of a Mini Head Screw Extruder Applied to Filament Deposition in Desktop 3-D Printer
- A Feature-Based Section Curve Reconstructing Strategy
- III. Engineering Design
- Criteria for the Design of Converters and Breakers in Low Voltage DC Distribution Systems
- Simulation Research on Small Scale Wind Power Generation System Connected to DC Micro-Grid
- Handling and Stability Study on Non-Rod Aircraft Tractor in Backward-Motion
- An Experimental Stress Analysis of a Jib Crane
- Experimental Stress Analysis of Elevator Guiding Equipment
- The Diamond Wire Saw Test Bench Design and Loading Analysis
- The Application of BESO in Vibration Damping of Ship Plate
- Free In-Plane Vibration Analysis of Annular Plates with General Boundary Conditions
- Dynamics Analysis and Vibration Isolation Design of Shared Foundation on Marine Turbo Generator Set
- The Research on Shell Strength and Pressurize Reliability of Underwater Vehicle Mating Device
- The Application of the Fireproof Wood Treated with Fire Retardant in the Warship Cabin
- Influence of the Thermal Assembly Process on the Stress Distributions in Shrink Fit Joints
- Interference Fit Stress Concentrations with Full Chamfered Hub
- Modeling and Optimization of Process Parameters of a DF-CCP Etcher Chamber
- Design of a Long Distance Unidirectional Piezoelectric Motor Based on Non-Resonant Inchworm Principle
- Study on the Adsorption of Carbonized Micron Wood Fiber Filter for the Nanoparticle Emissions of Diesel Engine
- Parametric Camshaft Mechanism for Adaptive Building Envelope and Kinetic Building Ornaments
- IV. Production, Manufacture and Engineering Materials
- Service Engineering: A Framework of Integrated Manufacturing System
- Production Scheduling for Sustainable Manufacturing Systems
- An Approach for Manufacturing Process Representation in Product Lifecycle Management
- Capability-Based Adaptation of Production Systems - Practical Case Study in TUT-Microfactory Environment
- Open Shop Dense Scheduling Algorithm Based on Semi-Matching Theory
- State of the Art and Analysis of Design for Assembly of Large and Heavy Parts
- Provision of Long Item Materials
- Research on Measuring Accuracy Improvement for Tool Presetter
- Effective Forming Processes of Hub Forging from Aluminum Alloy AlCu2SiMn
- Additive Tooling for Tube Hydroforming
- Application of Unstructured Finite Volume Method in Structural Static Mechanics
- Electrodeposition and Tribological Properties of Self-Lubricating Sn-Ni-PTFE Composite Coating
- Research on the Surface Roughness Parameters of Micro-EDM
- Research on Statistical Parameters of 3-DRoughness for Micro Wire Electric Discharge Machining Surface
- Improvement Arithmetic Method of Space Parameters of 3D Roughness for MWEDM Surface
- The Mechanism of Electrochemical Discharge (ECD)
- Rule Extraction from Support Vector Machine and its Application to Hot-Dip Galvanizing
- Accelerated Production of White Pepper Using Integrated Mechanical and Enzymatic Solutions in an Automated Machine
- V. CAD/CAM/CAE
- Innovative Approach for Teaching Graphical Engineering Focused on CAD/CAM/CAE Systems
- Transactional Model of Graph Transformations in Computer Aided Design
- Numerical Study on Mechanical Characteristics of Steam Turbine Valve Disc
- Numerical Analysis of Feed Rate Influence on Hollow Hub Shape during Rolling Extrusion Process
- Study on the Model of the Torch Tracks of CNC Flame Cutting of Rectangular Steel Pipes
- Manufacturability of Sheet Metal Design with the Help of Product Data Management (PDM)
- Disassembly Sequence Planning of Steam Turbines for Virtual Maintenance
- Disassembly Sequence Planning Based on Poisoning Ant Colony Algorithm
- VI. Gearing, Mechanical Transmission and Mechanisms
- Problem Analysis of Conoprobe in Gear Measurement Application
- Optimal Tooth Surface Modifications in Face-Hobbed Hypoid Gears
- Computerised Tooth Profile Generation of Conjugated Involute Internal Gears
- On Strain of Gear Meshing Thermo-Mechanical Coupling
- Prediction of Heat Generation and Temperature Distribution in High Speed Preloaded Ball Screws
- Implications of Contact Parameters on the Dynamics of Chain Drives
- Development of Friction Properties Experimental Device of Mechanical Seal Material in Vacuum Working Condition
- Study on the Tribological Properties of PTFE-Based Composites Materials Sliding Pair under Extreme Environment
- The Effect of Bearing Surface Finish on Engine Performance
- The Research on Oil-Air Lubrication in Grooved Sliding Bearing
- Shear Traction and Sticking Scope of Frictional Contact between Two Elastic Cylinders
- The Research on Oil-Air Lubrication and Oil Lubrication in the Sliding Bearing
- The Research on the Lubricating Property of Oil-Air Lubrication in the Sliding Friction Element
- The Application of Improved Cyclical Spectrum Density Method in Fault Diagnosis of Rolling Bearing
- Dynamic Synthesis of Adaptive-Mechanical CVT
- Investigation of the Operational Behaviour of Wide V-Belts in CVT Applications
- On the Development of a Manipulator Type Parallelogram 3-DOF for the Optimization Trajectory
- The Vibration Modeling and Analysis of Stewart Platform-Based Machine Tool
- Design and Analysis of a Novel 5 Dimensional Active Vibration Isolator with Parallel Mechanism
- Analysis and Simulation of Deployable Modularized Truss Mechanisms
- Mechanism Design and Modal Analysis of Vertical-Axis Tidal Turbine
- VII. Machine Condition Monitoring
- An Ensemble Dynamic Time Domain Averaging Method for Gear Fault Detection without Tachometer
- Diagnosis of Low-Speed Helical Gears Based on Hilbert Demodulation and Empirical Mode Decomposition
- Prophase Failure Prediction of the Mechanical Transmission Systems Based on the Biological Evolutionary Algorithm
- An Energy-Efficiency Wireless Sensing Method for Mechanical Failure Signal
- A Time-Efficiency Multi-Channel MAC Protocol for Wireless Sensor Networks
- Cold Rolling Strip Off-Tracking Online Monitoring Method via Wireless Sensor Network with Self-Powered Nodes
- Experimental Research on the Feature Extraction of Underwater Transient Signal
- Investigating the Design of Condition Monitoring Systems to Evaluate Surface Roughness under the Variability in Tool Wear and Fixturing Conditions
- Coupling Effect between Gear Backlash of Friction Plate and Axial Separation Gap in Multi-Friction Pairs
- Research on the Optimization Method of the Friction Plate Backlash
- Analysis of Vibration Characteristics of Friction Plate Based on Rigid-Flexible Coupling Model
- A Method of Chatter Marks Identification Based on Autocorrelation-Threshold
- An Exact Series Solution for the Vibration of Mindlin Rectangular Plates with Elastically Restrained Edges
- Intelligent Design and Control of Outdoor Lighting, Complexity Issues
- VIII. Finite/Boundary Element Methods
- Strength Analysis of the Static Load Test Frame Based on ANSYS Workbench
- Analysis of Functionally Graded Rectangular Plate by ANSYS
- Dynamic Analysis of T-Shaped Plate with General Boundary Conditions
- Fatigue Life Analysis of Wire Rope Strands with Finite Element Method
- Design and Finite Element Analysis of Gantry Crane
- Modal Analysis on 600 Wh Energy Storage Flywheel Rotor System
- FEM Analysis of Helical Rolling of Steel Balls
- Analysis of Instability for the String-Net Structure in the Deployable Antenna
- IX. Optimisation, Simulation and Computing Technologies
- Epistemic and Methodological Challenges of Dynamic Environmental Assessment: A Case-Study with Energy Production from Solar Cells
- Classification of Mutation Operators Applied to Design Models
- Mutation Testing Approach to Evaluation of Design Models
- Research on Evolutionary Topology Optimization in ANSYS
- Multi-Object Multi-Discipline Probabilistic Design of High-Pressure Turbine Blade-Tip Radial Running Clearance
- Simulation Study on Feed Rate Optimization Technique Based on Generalized Predictive Control
- Standardising Academic Transfer Tool: Converting Curriculum Documents to XCRI Format Using UML
- Curriculum Design within a Semantic Information System
- Research and Implementation of an Improved Canny Edge Detection Algorithm
- Recognition and Extraction of Debris Parameters in Traffic Accident Picture
- Simulation of Pedestrian Colliding with Microbus Windshield
- New Virtual Application for Improving the Students' Understanding of Ternary Phase Diagrams
- Interactive Virtual Platform for Simulating a Concrete Compression Test
- X. Manufacturing Informatics
- Advanced Design Optimisation by Means of Multiobjective Evolutionary Algorithms: The Case of Two Real World Applications
- Locator Layout Optimization for Checking Fixture Design of Thin-Walled Parts
- A Sugeno-Type Fuzzy Expert System for Rough Turning
- Façade Optimisation Using a Point Equilibrium Methodology
- The Capability of the Laser Based Additive Manufacturing Process in the Manufacture of Fractal like Heat Transfer Devices
- Monitoring and Digitising Human-Workpiece Interactions during a Manual Manufacturing Assembly Operation Using KinectTM
- Numerical Simulation and Optimization of Drill Pipe - Martian Soil Model
- XI. Robots and Control
- The Analysis and Control of Exoskeleton Upper-Limb Rehabilitation Robot
- A New Design of Climbing Robot with TRIZ Theory
- Study on a New Type of Clearing Stump Robot
- Longitudinal Associated Stability Analysis of Mobile Robot in Rough Terrain
- Walking Stability Analysis of Multi-Legged Crablike Robot over Slope
- Track Link-Terrain Interaction Simulation Based on Terramechanics
- Design and Implementation of a 3D Range Scanner for Mobile Robots
- Integrated Approach for Multi-Robot Spot-Welding Cell Design and Welding-Point Allocation
- XII. Engineering Management and Enterprise
- Effective Management of Engineering Projectsusing 4Es Model
- Pricing and Emission Reduction Strategy of Manufacturer with Carbon Emission Constraints in Low Carbon Supply Chain
- Emissions Reduction Cost-Sharing Contract through Green Innovation under Carbon Emission Constraints
- Price and Carbon Emissions Level Decisions in a Two-Echelon Supply Chain: Insights from Carbon Labelling
- Analysis of the Barriers to Environmental Management Systems Implementation in the Libyan Oil Industry
- When Does the Trust Prohibit the Technology Transfer between Two Manufacturing Firms? A Perspective of Transaction Cost Economics
- Relationship between Technology Standards and Technology Spillovers Effect of Foreign Direct Investment Based on Product Life Cycle
- Study of Technology Spillovers Effect with Foreign Direct Investment Based on Technology Standards
- A Review of Problems Faced by ERP Consultancy and Client Organizations in China
- Rebuild Technology Transfer in the Presence of Remanufacturing Dealer
- Remanufacturer-Manufacturer Collaborative Model in the same Channel under Three Channel Power Structures
- The Adaptability of Products to E-Commerce: Transaction Cost Economics Perspective
Les mer
Produktdetaljer
ISBN
9783037858196
Publisert
2014-01-06
Utgiver
Trans Tech Publications Ltd
Vekt
1400 gr
Høyde
240 mm
Bredde
170 mm
Dybde
37 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
736