Advances in Materials and Materials Processing
Heftet /
2013
/ Engelsk
Produktdetaljer
ISBN
9783037856208
Publisert
2013-03-27
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
4700 gr
Høyde
240 mm
Bredde
170 mm
Dybde
138 mm
Aldersnivå
P, UP, 06, 05
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
2754
Selected, peer reviewed papers from the 2012 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2012), December 22–23, 2012, Beihai, China.
The 508 papers are grouped as follows:
Chapter 1: Composites;
Chapter 2: Micro/Nano Materials and Ceramic;
Chapter 3: Polymers and Biomaterials;
Chapter 4: Optical/Electronic/Magnetic Materials;
Chapter 5: Chemical Materials and Technologies;
Chapter 6: Energy Materials;
Chapter 7: Iron and Steel;
Chapter 8: Metal Alloy Materials;
Chapter 9: Materials for Building and Structures;
Chapter 10: Mechanics of Materials;
Chapter 11: Environmental. Research, Friendly Materials and Recycling Waste Technologies;
Chapter 12: Surface Engineering/Coatings;
Chapter 13: Materials Forming;
Chapter 14: Materials Machining;
Chapter 15: Welding & Joining;
Chapter 16: Laser Processing;
Chapter 17: Casting and Solidification;
Chapter 18: Geology and Mineral Processing.
Les mer
<p>Selected, peer reviewed papers from the 2012 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2012), December 22–23, 2012, Beihai, China</p>
- Preface and Conference Organization
- Chapter 1: Composites
- Effects of Void on Physical Properties of Hygrothermal Conditioned CFRP
- Flammability and Mechanical Properties of Intumescent Flame Retarded PP/EVA Composites
- Preparation and Characterization of Graphene/RTV Silicone Rubber Composites
- Role of Multiwalled Carbon Nanotube on Mechanical Reinforcement of High-Density Polyethylene
- The Mechanical Property of CFRP Laminates with Voids
- The Static Mechanical Properties of Carbon/Epoxy Composite Laminates with Voids
- Compressive Behavior of Spark Plasma Sintered CNT Reinforced Al2124 and Al6061 Nanocomposites
- Bentonite Composite and Fibre
- Exploration of Al Matrix Composites Reinforced with Al-Ti Intermetallics/Ti Metal Compound Spherical Agents
- Linear Defect States of Phononic Crystal Thin Plates – An Application of Finite Element Method
- Effects of Delaminations on Vibration Characteristic for HT3/5224 Carbon Fiber Reinforced Laminated Plate
- Electrical Property of Carbon Nanotubes/Epoxy Resin/Polyetherimide Composites with Inverted-Phase Structure
- Fabrication and Microstructures of WC-Based Composites by Plasma Jet Metallurgy
- Microstructure and Wear Properties of In Situ Production of (Fe,Cr)7C3 Particulate Bundles Reinforced Iron Matrix Composites
- Preparation of High-Filled Talcum Masterbatch and its Application in Polypropylene
- Selective Distribution of Carbon Black in Epoxy Resin/Thermoplastic Multiphase Composites
- Thermal Analysis for Fiber-Reinforced Composites Containing Inhomogeneous Interphase Subjected to a Radial Constraint
- Synthesis and Properties of Flame-Retardant Waterborne Emulsion Derived from O-Cresol Formaldehyde Epoxy Resin
- A Comparative Investigation on Foamability and Structure of Al Foams Added with Precipitator and Cenosphere Fly Ash Particles
- Mechanical Properties and Morphology of Long Glass Fiber Reinforced PP Composites
- Hydriding Characterization of La2Mg17-Ni Composite Materials by Mechano-Synthesis
- Preparation of TiC Hard Metal by Presssureless Infiltration Method
- Character Alteration Research on Fe3O4 /PVA Susceptible Composite Film
- Effects of PP-G-MA and Epoxy Resin on Morphology and Mechanical Properties of the PP/LGF Composites
- Study on Properties of Epoxy Resin /Al2O3 Composites
- Studies on Curing Kinetics of Epoxy Resin / Modified Amine System
- Epoxy Resin (EP) / Nano-SiO2 Composite Material Preparation by Two Processes
- Preparation of Stearic/Montmorillonite Composite as Form-Stable Phase Change Material
- Simulations and Experimental Validation of Compression Properties of SiC/Fe–20Cr Co–Continuous Composites
- Numerical Simulations of Uniaxial Compression Properties of SiC/6061 Aluminum Alloy Co–Continuous Composites
- The Isothermal Simulation of the Un-Saturated Flow in the Dual-Scale Porous Media
- Chapter 2: Micro/Nano Materials and Ceramic
- Diameter-Controlled Synthesis of Single-Walled Carbon Nanotubes
- Direct Electrodeposition of Highly Ordered Au-Cu Alloy Nanowire Arrays
- Effect of High Shear Mixing Parameters and Degassing Temperature on the Morphology of Epoxy-Clay Nanocomposites
- Effects of Processing Techniques on Morphology and Mechanical Properties of Epoxy-Clay Nanocomposites
- Evaluation of Residual Iron in Carbon Nanotubes Purified by Air and Acid Treatments
- Experimental Studies on Micro-Characteristics of Nanocrystalline MgO
- Formation Mechanism of Polyaniline Nanostructures in PEG Solution
- A Modified Monte Carlo Method for Phonon Radiative Transfer in Nanoscale Materials
- Microstructure and Optical Properties of ZnS:Mn Nanocrystals
- Scallion-Root-Shaped GaN Nanorods Grown by Two-Step Method and Study on their Properties
- Synthesis and Characterization of Carbon-Encapsulated Nickel Nanoparticles from De-Oiled Asphalt
- A Mild and Efficient Approach for the Reduction of Graphene Oxide
- Compression Behavior and Mechanical Modeling of Nanocrystalline Ni under High Strain Rate Loading
- Hollow Structure of CdSe by W/O Microemulsion Method
- Preparation and Characterization of Micron Silicon Dioxide Spherical Particles
- Preparation of Nitrogen Hybrid Ordered Mesoporous Carbons from Melamine-Phenol-Formaldehyde Resoles by Soft-Template Method
- Study on a Preparation of PS Hollow Submicro-Fiber by Coaxial Electrospinning
- Comparison between Dextran-Coated Superparamagnetic Iron Oxide Nanoparticles and Magnetoliposome on Rabbit Corneal Endothelial Cells Labeling
- Preparation and Characterization of MnO2 Loaded CuO Nanosheets
- Preparation of Fe (III) – Amidoximated PAN Nanofibers Complexes for Degradation of Azo Dye under Visible Light Irradiation
- Synthesis of Chitosan-Stabilized Gold Nanorod Using Tripolyphosphate
- Preparation of Nanoparticles of Calcium Oxalate Dihydrate
- Preparation of Dandelion-Like Nano/Micro Zinc Oxide Material
- The Research on the Photocatalytic Performance of one Kind of Nano Zinc Oxide
- Molecular-Dynamics Simulation of Structure Change for a Molten Cu297 Nanocluster during Rapidly Quenching
- Synthesis of ZnO Nanowires for Hydrogen Sensor Application Using Simple Heating Technique
- Preparation and Characterization of Shellac/Polyvinylpyrrolidone Nanofiber as a Material for Medical Application
- Stable Dispersed Graphenes Prepared by the Reduction of Graphene Oxides with Mercapto Acid
- A Study on Crystallization of Fused Silica/Zirconia Ceramic Composites
- Lamination of Green Ceramic Tapes in the Manufacturing of Multilayer Ceramic Devices
- Performance Study of Composite Clay Instead of a Single Plastic Clay
- Predicting the Mechanical Properties of Electric Porcelain Using ANN and MLR
- Effects of the Content of ZrO2 Nanoparticles on the Microstructure and Properties of Al2O3-TiC-ZrO2 Micro-Nano-Composites
- Research on Mullite-Corundum-Aluminium Titanate Composite
- Research on Polymerization of PMN-PZT Piezoelectric Ceramic by Gelcasting Using NMAM System
- Sol-Gel Preparation and Infrared Radiation Property of Zinc-Substituted Cordierite Ceramics
- Size Influence on Magnetic Properties of Nickel Hollow Spheres
- Preparation and Microwave Absorbing Performance of Co-Cu-Ni Ferrite/Multi-Walled Carbon Nanotubes Composites
- Characterization and Properties of UV-Cured Epoxy Acrylate/POSS Nanocomposites
- Facile Preparation of Polylactic Acid/Ketoconazole Composite Microspheres by Oil/Water Solvent Evaporation Method
- Electrical Properties of Pt Nanowires Deposited with Focused Ion Beam
- Structural Stability and Electronic Properties of Fe-Doped B13C2: First-Principles Investigation
- The Preparation and Study of Graphene Supported CoxMn3-XO4 Nanocomposites as Advanced Oxygen Reduction Reaction Electrocatalyst
- Shape-Controlled Synthesis and Pattern Recognition of Dendritic Co3O4 Superstructures
- Oxidation Resistant of Silicon-Boron Pitch Carbonization Product
- Study on the Influence of Porous Anodic Alumina Membrane on Separation of Hydrogen and Methane
- Effects of Solid Content on Properties and Structure of PMN-PZT Green Body by Gelcasting
- Characteristics of Alumina Films Formed by the Annealed Aluminum Films at High Temperatures in Air
- Chapter 3: Polymers and Biomaterials
- Rheological Properties and Crystallization Behavior of Poly(trimethylene Terephthalate) Blends with PBPCS
- Preparation and Properties of Copolyimides Containing Fluorine and Alicyclic Group
- Preparation of PMAM-B-PNVP and its Hydrolysate by RAFT Polymerization: Structure Characterization and its CO2 Permeation Performance
- Synthesis of Cellulose-Graft-Poly (L-Lactide) via Ring-Opening Polymerization and Degradability Research
- Screening and Identification of β-Glucosidase Producing Strain of Fusarium Oxysporum
- Study on Formula of New Type Flame Retardant Polyethylene
- Study on the Preparation and Properties of the Phosphorus-Containing Flame Retardant PET Copolymer
- Branched and Responsive Antimicrobial Polymers Based on Modified PVA for Functionalizing of Cellulose Fibres
- Graft Copolymeriztion of Glycidyl Methacrylate/Styrene onto Polypropylene in Solid State
- Maleic Anhydride Grafted Polymers Toughening and Flame Retardant Polystyrene Study on Modification
- R-ATRP of Acrylamide under the Action of Copper Complex System in Aqueous Two-Phase
- Study on Hydrolysis Conditions of Flavourzyme in Soybean Polypeptide Alcalase Hydrolysate
- Study on Soybean Polypeptide Refining Process
- Comparison of Different Extraction Methods for Antioxidant Property of Flavonoids from Pomelo Peel
- A Novel Effective Y-Shaped Silicon Stent for Treating Canalicular Laceration
- Extraction of the Pectin from Virginica Stem Bark and Study on its Structure and Composition
- Synthesis and Properties of Biodegradable Liquid Crystalline Poly(ester-Urethane)s Based on Poly(L-Lactic Acid)
- Preparation, Characterization of Substituted Aromatic Heterocyclic Phosphate Salts and the Application in Isotactic Polypropylene
- Preparation and Research of the Multifunctional Heat Stabilizer with Rare Earth Used in PVC Products
- The Microstructure of Polyurethane (PU)/Ethylene-Vinyl Acetate (EVA) Polymer Lastomer of Analysis
- Zinc Hydroxystannate-Coated Mineral Grade Mg(OH)2 as Flame-Retardant and Smoke Suppression for Flexible PVC
- Flame Retardant Low Density Polyethylene with Aluminium Hydroxide/ Commercial Fire Retardants FR01 Synergistic System
- Construction of Dendritic-Linear Brushes on Silica Nanoparticles by Electrostatic Assembly
- Study on the Optimization of Copolymerization Conditions of LASP/AA/AM Polymer
- Nonisothermal Crystallization Kinetics of Isotactic Polypropylene Filled with a Novel Nucleating Agent
- Assessment of Functionality of Aged Cables at Loading by Heat Flux
- Experimental Research on Co-Gasification of Crude Glycerin and Corn Cob
- Chapter 4: Optical/Electronic/Magnetic Materials
- Microstructural, Optical and Electrical Properties of ZnO:Sn Thin Films Deposited by Sol-Gel Method
- Optical Constants of Quartz Glass in 1.34-4.20μm Spectral Range
- Optical Studies of Poly (N-Carbazole) (PVK) Blending with Polyvinylpyrrolidone (PVP) Using Tauc/Davis-Mott Model
- Refractive Index Dispersion and Optical Dielectric Properties of Poly(N-Carbazole)/Poly(vinylpyrrolidone) Blends
- The Potential Realization of Solar-Blind Ultraviolet Detecting Using ZnO-Based Alloy Thin Film
- Two-Photon Absorption Properties of s-Triazine Derivatives With Near Octupolar Symmetry
- Combustion Synthesis of CaMoO4:Eu3+, Li+ Red Phosphors Using Urea-Thiourea Mixture Fuels
- Excitation and Emission Properties of Poly(N-Carbazole)/Poly(vinylpyrrolidone) Blends Characterized by Fluorescence Spectroscopy
- First-Principle Calculation on Misfit Layered Cobaltite and La-Doped Series
- Fluorescence and Energy Transfer in Er3+/ Nd3+ Co-Doped Oxyfluoride Tellurite Glass
- Hollow Spherical CaMoO4:Eu3+, Li+ Phosphors Prepared by Spray Pyrolysis
- Influence of Coating Content on the Magnetic Properties of Iron-MnZn Ferrite Soft Magnetic Composites
- Preparation and Characterization of SrAl2O4:Eu2+ by Microwave - Combustion Method
- Study of Structural and Electrical Transport Properties of Polycrystalline La1-XCaXMnO3 (x=0.33, 0.5 and 0.9) Prepared by a Co-Precipitation Method
- Synthesis of High Brightness Red Long Persistent Phosphor (Sr 1-X Ca X)S: Eu, Dy by Sol-Gel Thermolysis Method
- An Oxide-Diluted Magnetic Semiconductor: Co-Doped ZnO
- First-Principles Calculation of Electronic Structure of the Cu–Doped Pyrite FeS2
- Growth of ZnO Films on Si(111) by Metalorganic Chemical Vapor Deposition with AlN and Low-Temperature ZnO Double Buffers
- Hydrothermal Synthesis and Photoluminescence Properties of Ca(MoO4)x(WO4)(1-X) Microcrystallines
- Measurement Error of the Coercivity Hcj of NdFeB Permanent Magnet Caused by Air Gap
- Numerical Simulation of the High Gain and Low Breakdown Voltage InGaAs/InP Avalanche Photodiode
- Optical Properties and Defect Study of Ca2+ Co-Doping Lu2Si2O7:Ce3+ Single Crystal Scintillator
- Preparation and Research on Luminescent Properties of Eu-Doped TiO2-ZnO Composite Powders
- Preparation of CsI(Tl) Scintillation Film by RF Magnetron Sputter Method and its Structural and Optical Characterization
- Study on Y3Al5O12:Eu3+ Phosphor Coated by Bi2O3
- Exposure Schedule for Uniform Diffraction Efficiency of Partially-Overlapping Multiple Holograms in Dual Monomers Photopolymers
- Fabrication of Silicon Nanowires by Electroless Etching for Thermoelectric Application
- The Growth and Optical Properties of CdS Nanorods via Solvent-Thermal Route
- Characteristics of Silicon Nanowire Field Electron Emission
- The Study of Au/TiO2/Au Resistive Switching Memory with Crosspoint Structure
- Novel Preparation Method and Luminescent Properties of Eu3+ Doped CdWO4 Nanorod
- Combustion Synthesis of Nanocrystalline Y2O2S: Eu 3+ , Mg 2+ , Ti 4+ Red Long-Lasting Phosphors Using Mixture Fuel of Thiourea and Citric Acid
- Study on Bilayer-Type ZTO Thin Films Prepared by MOCVD
- A Novel Demultiplexing Photodetector with Integrated Vertical Conical Structure
- Preparation and Properties of ZnO@ZnS Nano-Array Core-Shell Structure with Different Concentration of TAA
- Chapter 5: Chemical Materials and Technologies
- Synthesis of Diaryl Pyrrolones Derivatives as Combretastatin A-4
- Mechanochemical Assisted Synthesis of Titanium Silicalite-1
- Preparation of Controlled Release Urea and its Release Characteristics
- The Effect of Density on Polyesterification Kinetics of Neopentyi Glycol/Maleic Anhydride System
- An Investigation on Properties of Sn-SBA-16 Synthesized without Mineral Acid Added
- Catalytic Dehydrogenation Reaction Activity of Cyclohexanol over Cu2O/Mg(OH)2 Catalysts
- Development Toxicity and Degradation of Diethyl Phthalate
- Phosphotungstic Acid, Silicotungstic Acid and Silicon Tungsten-Cobalt Heteropoly Acid with Bovine Serum Albumin Interaction
- Study on Compound Corrosion Inhibitor of Aluminum in Salt System
- The Parameters of Preparing Polyaniline Doped by Hydrochloric Acid
- A Novel Formula of Diverting Acid System and Application
- Preparation of Hollow Microsphere and its Application in Paper Coating
- Preparation of Low-Sulfur Expanded Graphite with Different Size Particles
- Comparative Study on Compositions of Oil-Water Transition Layer before and after ClO2-Treatment Process
- Optimal Design for ASP of Mixed Surfactants with Rhamnoilpid
- Thermal Degradation Study of Lithium and Potassium Iodide/Epoxidized Natural Rubber Polymer Electrolytes
- Synthesis and Evaluation of a New Type of Cationic Gemini Surfactant
- Characterization and Synthesis of a Betaxolol Hydrochloride Intermediate
- Cu(OH)2/N-TiO2 Compound Heterojunction Photcocatalyst: Preparation, Characterization and Photocatalytic Properties
- Preparation of Three-Dimensionally Interconnected Meso/Mesoporous Ho3+ Doped TiO2 Nanoparticles with Enhanced Photocatalytic Activity
- Research on the Influence of PEG to the Nuclei Population Density of Copper Electrocrystallization
- Preparation of La2(WO4)3 by Two Step Method and Characterization
- The Synthesis and Characterization of Zinc Borate Zn2B6O11·7H2O
- Synthesis and Characterization of Bridged Amine-Functionalized Mesoporous Organosilica Materials
- A Density Functional Study of PdCn(n= 2-12) Clusters
- Optimization of Membrane Electrode Assemblies Anode of a Micro Direct Methanol Fuel Cell by Mathematical Modeling
- Chapter 6: Energy Materials
- LiMn2O4 Prepared by Liquid Phase Flameless Combustion with F-Doped for Lithium-Ion Battery Cathode Materials
- Combustion Kinetics Characteristics of Dry Distillation Coal Tar
- Chapter 6: Energy Materials
- Experimental Research on Producing Shale Oil through Thermal Cracking of Small-Particle Oil Shale
- Structures of Li1+xMn2-XO4 Synthesized by Different Methods
- Effect of Cr Doping on Electrochemical Performance of LiMn2O4
- Electrochemical Behaviors of Different Gradesof Pure Aluminum in Alkaline Solution
- Effects of Polyethylene Glycol on Agarose-Based Magnetic Polymer Electrolyte for Dye-Sensitized Solar Cell
- Structure and Electrochemical Performances of LiFePO4/C Composite Cathode Coating with Different Carbon Sources for Lithium Ion Batteries
- Study on Low-Temperature Oxidation Process of Low Rank Coal by In Situ FTIR
- Synthesis and Performances of a Fe-Site Doped Lithium Iron Phosphate
- Synthesis of (Ba,Ti)-Doped Apatite-Type Lanthanum Silicate Nano-Sized Powders via Microwave-Assisted Sol-Gel Auto-Combustion Route
- Sheet-Shape Specimen Creep Behavior and Microstructure Analysis of Ni-Based Alloy C276 at High Temperature
- Synthesis, Characterization and Electrochemical Properties of Li1+xMn2O4 Spinels Prepared by Solution Combustion Synthesis
- Research Progresses of Two Kinds of Novel Electrolyte Lithium Salts: Lithium Bis(oxalato) Borate and Lithium Oxalyldifluroborate
- Surface Passivation of Silicon Wafers by Iodine-Ethanol (I-E) for Minority Carrier Lifetime Measurements
- Chapter 7: Iron and Steel
- Alloy Design and Microstructure Control for the Production of Heavy Ductile Irons Used in Large-Scale Windmills
- Corrosion Behavior of Low-Alloy Steel in COT Upper Deck O2-CO2-SO2-H2S Moisture Environment
- Effect of Different Strain on Microstructure Evolution of Medium Carbon Steel
- Effect of Phosphorus Contents on Texture and Grain Boundary Character for the Annealing High Strength Ti-IF Steels
- Influence of Rare Earth on Microstructure of 20MnCrNi2Mo Wear-Resistant Cast Steel
- Oxidation Behavior of a TP304H Stainless Steel in the High Temperature and High Pressure Water Vapor
- Study on Metal Thermal Reduction of Caustic Calcined Dolomite Based Compound Desulfurizer
- Continuous Cooling Transformation of Overcooling Austenite and Structure Evolution of Si Steel
- The Evolution of M/A in Ultra-Low Carbon Bainite Steel
- Sulfides Precipitation during Transformation of a High Sulfur Alloy Steel
- Application of Frumkin Isotherm for Carbon Steel Corrosion in Soil Media
- Transformation Behavior of Austenite Continuous Cooling of Nb-Ti Micro-Alloyed Low Carbon Steel
- Effect of Ultrasonic Inoculation Treatment on Distribution of Sulphur in Fe-S Alloy
- The Microstructure and Elements Distribution of High-Chiromium Hypereatectoid Steel by High-Temperature Homogenization
- Study of V2O5 Direct Alloying Reductants
- Process Design Strategies for Producing Heavy Section Steel with Improved Quality
- Development of Domestic Prehardened Plastic Mould Steel
- Study on Antibacterial Properties of SUSXM7 Cu- Bearing Austenitic Stainless Steel
- The Evolution of Deuterium Bubbles in Iron under Electron Irradiation
- Chapter 8: Metal Alloy Materials
- Effect of Temperature on Structure of Outer Fe Oxide Layer of Fe-2.2Si Alloy
- Effects of Alloy Composition and Annealing Treatment on the Performance of Aluminum Conductor
- Effects of Ce, Mn, Cr on the Microstructure and Properties of High-Iron Eutectic Al-Si Piston Alloy
- Effects of Si, Cu and Mg on the High-Temperature Mechanical Properties of Al-Si-Cu-Mg Alloy
- Effects of the Aging Time and Temperature on the Microstructures and Mechanical Properties of 6082 Aluminum Alloy Extrusions
- Influence and Theory Analysis of Ti, Zr, B on the Refining Effect of Aluminum Alloy
- Effect of Heat Treatment on Microstructure and Mechanical Properties of A390 Alloy
- Effects of High Co Contents in Fe-Cr-Mo-C-B-Y Alloy on the Glass Forming and the Mechanical Properties
- Influence of Gd Content on the Microstructure and Mechanical Properties of Zn-Al-Mg-Si Alloy
- Tensile Properties of a Cast TiAl Alloy with Directional Lamellar Microstructures
- The Divacancy Formation Energy for B2 FeAl Alloy Simulated with Finnis-Sinclair many-Body Interatomic Potential
- An Investigation on Grain Refinement Mechanism of Master Alloys Al-Ti, Al-TiC and Al-Ti-C Toward Pure Aluminum
- Effect of Heat Treatment on Microstructure and Properties of Ti-6.5Al-1.5Mo-2.5V-2Zr Titanium Alloy
- Effect of Si Content on Deformation Behavior of DC Cast Al-Si Alloys
- Microstructure and Mechanical Property of the Directionally Solidified NiAl-Cr(Mo)-Hf/Ho Alloy
- Research on Corrosion Rate Prediction of Aluminum Alloys in Typical Domestic Areas Based on BP Artificial Neural Network
- The Precipitation Behavior of γ' Phase in Superalloy FGH96 during Continuous Solution Cooling Conditions
- In Situ Study of Stress-Induced Martensitic Transformation in Ni47Ti44Nb9 Shape-Memory Alloys
- Investigation of Porous NiAl Intermetallics Prepared by Self-Propagating High-Temperature Synthesis
- Microstructure and Growth Behavior of the Intermetallic Compound for Sn-1.0Ag-0.5Cu-NiB/Cu Solder Joint Interface
- Eutectoid Transformation in Zn Alloy with High Al Content
- High Temperature Oxidation Behaviour of AlCuTiFeNiCr High-Entropy Alloy
- Microstructure Evolution of Al-Ti-C Alloy Wires during Remelting Process
- The Effect of Aging on the Corrosion Property of Al-7Si-0.3Mg
- Precipitation Kinetics and Behavior of δ Phase in Inconel 718 Alloy
- Research on Multiple Plastic Deformations of Ultra-High Strength Aluminium Alloy
- Prediction of Electrical Conductivity of Cu-15Ni-8Sn-XSi Alloys Using the Physical Model and Artificial Intelligence Model
- Preparation and Corrosion Resistance of Cu-Based Bulk Glassy Alloys
- The Inhibiting Effect of Monoethanolamine on 6063 Aluminum Alloy in Sodium Chloride Solution
- Efficiency in the Extraction of Pure Silicon from Al-Si Alloy Melts by a Combined Process of Solvent Refining and Centrifugation for Solar Silicon Feedstock
- Research on Material Erosion Mechanisms of High Si-Al Alloy by Micro-EDM
- Manufacture, Structure and Properties of Copper Foams
- Chapter 9: Materials for Building and Structures
- Experimental Measurements of the Selected Properties of AeroTherm
- Influence Research on the Pretreatment of Recycled Coarse Aggregate to the Strength of Recycled Concrete
- Research on Reinforced Concrete Column under High Speed Impact of Different Diameter Projectile
- The Influence of Combined Admixture of Super-Fine Limestone Powder and Low-Quality Fly Ash on the Performance of Cement Mortar
- The Temperature Distribution Research of Foaming Gypsum Mold in the Fabrication and Pouring Process
- Utilizing the Waste Polystyrene to Enhance the Thermal Insulation of the Local Buildings
- Analytical Model of Capillary Suction Velocity of a Pipe with Multiple Sizes
- Research on Porous Properties of Air-Entrained Lightweight Aggregate Concrete
- Study on BFRP Constrained Preloaded Concrete Square-Shaped Column
- Study on Indoor Detecting Methods and Performance of Shotcrete
- Design a Thermosetting Asphalt Mixture for Surfacing on Orthotropic Steel Deck Bridge
- Influence of Aspect Ratio of Macro Synthetic Fiber on Mechanical Properties of Shotcrete
- Research on Preparation Technology of Exposed-Aggregate Cement Concrete Pavement
- Synergistic Effects and Cracking Bending Strength for Steel-Polypropylene Hybrid Fiber Reinforced Concrete
- Use of Sugarcane Bagasse Ash as Raw Material in Production of Autoclaved Lightweight Concrete
- The Influences on Cement Clinker by Disposing Glyphosate Waste Mother-Liquor with Rotary Kiln
- Research Status on Fatigue Behavior of Reinforced Concrete Beams Strengthened with Fiber Reinforced Polymers
- Tricalcium Silicate (C3S) Properties in Different Physical and Chemical Environment
- Vibrating Mixing and the Improvement of Concrete Performance
- Asphalt Material Aging Mechanism and Characteristics Analysis Based on Infrared Spectrum
- The Experiment Research of a New Cementing Material Applied in Iron Tailing Filling
- Chapter 10: Mechanics of Materials
- Artificial and Natural Weathering of Chlorinated Polyvinyl Chloride (CPVC)
- Effect of Moisture Content on Thermal Physical Properties and Heat Transfer of Plywood during Hot-Pressing
- Failure Analysis of A7N01S-T5 Aluminum Alloy Buffer Beam for High-Speed Train
- Review on Surface Failure Mode of Metallic Materials in Very High Cycle Fatigue Regime
- The Effect of UIT on the Residual Stress of 7N01 Al-Alloy Welding Joints
- Analysis of Indentation Size Effect of Vickers Hardness Tests of Steels
- Experiment Study and Numerical Simulation of CFRP Sandwich Structure on Aircraft Ditching Model
- Study on Cracking of Anchor Structure due to Reinforcement Corrosion
- Study on the Electrometric Method to Measure the Young’s Modulus of Metal Materials
- Concrete Thermal Stress of Arch Dam in Construction Period of Stability against Sliding of Steep Slope Section
- Failure Analysis on Natural Gas Transmitting Pipe Based on the Data of Intelligent Inspection
- Integrity Assessment on Natural Gas Transmitting Pipe Based on the Finite Element Analysis
- Testing and Evaluation of Comfort Performances of Mongolian Clothing Fabrics
- Ultrasonic Nondestructive Evaluation of Composite Components Using Advanced Total Focusing Method
- Damage Calculation and Fatigue Life Prediction for Freight Car Body
- Reliability Analysis of Wear Casing Internal Pressure Strength
- Research on Structural Fatigue Damage Based on the Superimposed Load Spectrum Method
- Stress Analysis of Perforated Plate Based on ANSYS
- Influence of Point Defects on Band Gaps of Fe-Epoxy in Two-Dimensional Phononic Crystal
- Transmission Properties in 2D Phononic Crystal Thin Plate with Linear Defect
- Research on CSP Work Roll Defect Causes and Improvement Measure
- A Fretting Damage Analysis of Railway Axle
- Dry Sliding Friction and Wear Behavior of Surface Hardened Ferrous PM Cam Materials for Automobile Applications
- Failure Analysis on Strain Clamp on 220kV Transmission Line
- Effect of Carbon Doped in BN on Electronic Structures and Mechanical Properties
- Simulation and Analysis of the Wheat Stem Lodging
- Study on Impedance Calculation of Viscoelastic Material in Acoustic Tube
- Study on Tribological Behaviors of FeS Solid Lubrication Duplex Layer under n-Fe3O4 Additive Lubricating
- Crevice Corrosion Behaviors of X52 Carbon Steel in Chloride Containing Solutions
- A Research on the Stress Dispersion Property of the Warp Knitted Space Fabric
- The Qualitative Analysis of Far-Infrared Fiber by Near-Infrared Spectroscopy
- Determination of Boric Anhydride in Ascharite Ores by Inductively Coupled Plasma Atomic Emission Spectrometry
- Surface Activity Research of Cationic Gemini Surfactants
- 3D Generalized Beam (GB) Lattice Model for Analysis of the Failure of Concrete
- Dynamic Stress and Deformation of Non-Homogeneous Poroelastic Moderately Thick Shells of Revolution Saturated in Viscous Fluid
- High-Temperature Deformation Characteristics of a SA516GR70 Vessel Steel
- An Optimized Design Method for Thickness of Shells with Multi-Holes Based on Finite Element Method Theory
- Numerical Analysis of a New Test Method for Evaluating the Mechanics Characteristics of Steel Deck Pavement
- A New Stress Mathematical Model of Deformation Zone while Straightening Thin-Walled Tube
- Segmented Optimization Design of Aluminum Alloy Goal Crossbar Based on FEM
- Flexural Behavior Characteristics of UHPC According to Twisted Steel Fiber
- Fatigue Life Prediction of Welded Case Shell on Aeroengine under Combined Internal Pressure and Axial Loads
- Study on Bearing Behaviors of Bolted Joints in Composite Laminates
- Analysis of Structural Parameters for Unbonded Flexible Pipes
- Design and Cut Skills in Accordance with the Physical Properties of the Gem Stones
- Chapter 11: Environmental. Research, Friendly Materials and Recycling Waste Technologies
- A New Comprehensive Utilization Method for Coal Gangue: Preparing Alite-Sulphoaluminate Cement
- Catalytic Hydrolysis of CCl2F2 over Solid Base CaO/ZrO2
- Dissolution and Regeneration of Reed Leaf Fibers in Imidazole-Based Ionic Liquids
- Effects of Molybdenum Doping on Optical Properties of Sm0.3Ce0.7O1.85
- Effects of Nano Particle Hydroxyapatite on Cadmium Bioaccumulation and Translocation in Pakchoi (Brassia chinensis) from Cadmium Polluted Soil
- Experimental Study of Thermal Plasma Processing Waste Circuit Boards
- Preparation and Characterization of Alginate/Polyvinyl Alcohol Composite Fibers Containing Copper Ions
- Study of Reed Leaf Fibers’ Degumming in High Temperature and Pressure
- Treatment of Cationic Dye Wastewater with Hybrid Sorbent Generated by Anionic Dye Wastewater Hybridization with Calcium Fluoride
- Photoelectrocatalytic Degradation of HCB by N-Doped TiO2 Nanotube Arrays
- QSAR Study of the Adsorption Mechanism of Ascorbic Acid towards Iron in Alkaline Media
- Study on the Performance of Orange Oil Cleanser
- The Preparation and Characterization of Starch Oxidized by Nitric Acid and its Properties of Calcium Complexing Capacity
- Removal Chromium and Turbidity Using Starch Derivative Flocculant CSAX
- Synthesis and Paclobutrazol Visible-Light Degradation of Al/S Doped TiO2 Mesoporous Materials with Pyridine as a Template
- Use of Rice Husk Ash to Treat Simulated Agricultural Cultivation Wastewater
- Effects of Recycling Ladle Lining Materials on Phase Composition and Microstructure of Al2O3-SiC-C Castable for Iron Runner
- Effects of Recycling Ladle Lining Materials on Sintering Performance of Al2O3-SiC-C Castable for Iron Runner
- Treatment of Chlorobenzene Containing Wastewater by Titanium Oxide Photocatalyst
- Evaluation of the Leaching Behavior of Hexavalent Chromium from Malaysian Electric Arc Furnace Steel Slag
- Simultaneous Nitrification and Denitrification in Biofilm-Electrode Reactor
- A Preliminary Investigation on the Preparation of Bagasse Fly Ash as Clarifying Aid for Clarification of Cane Juice
- Assessment of Degree of Maturity of Compost Produced by Different Kitchen Waste Composting Methods
- Study on Spectrophotometric Determining Trace Tetracycline by Phase-Separation Floatation
- Experimental Study on Cr6+ Adsorption in Water about Corncob
- Spatial Distribution in Forest Soil Nutrients and its Relationship with Ecological Factors on the up Stream of Taihu Lake Basin
- Study of Thermal Degradation of Polymers
- Seasonal Soil Freezing Characters in Daxinganling
- Experiment and Analysis on Temperature Distribution of Straw Double-Grate Briquette Boiler Furnace-Tank
- Heteropolyacid Photocatalytical Degradation of Atrazine in Aqueous Solution under UV-Irradiation
- Investigation on the Electrochemical Behaviors of Phenol Oxidation on GCE (Glassy Carbon Electrode)
- Study on Preparation of Iron-Based Flocculant by Hydrogen Peroxide Oxidation Process
- Research on Cavitation and Impinging Stream Microelectrolysis Reactor for Treating Organic Wastewater
- The Influence of Rainwater Reuse on Urban Water Circulation and Downstream Eco-Environment
- The Evaluation of Photocatalytic Properties of Iron Doped Titania Photocatalyst by Degradation of Methylene Blue Using Fluorescent Light Source
- Research on Characterization and Application of High-Performance Ion Exchange Material
- An Evaluation Method of Water Resources Carrying Capacity Based on Projection Pursuit Model
- Chapter 12: Surface Engineering/Coatings
- Research of the New Composite Solid Lubricant Coating
- Improving Anti-Aging Coatings by Coupling of Organic and Inorganic Ultraviolet Absorbers
- Dielectric and Tunable Properties of Lead Barium Strontium Titanate Thin Films Fabricated by Radio Frequency Magnetron Sputtering Method
- Chapter 12: Surface Engineering/Coatings
- Study on Corrosion Wear Behavior of 70 Aluminum Alloy Anodic Oxide Coating
- Effect of Hydrogen Dilution on Properties of Microcrystalline Silicon Thin Films Prepared by VHF-PECVD
- Quantum Size Effects of Chemical Bath Deposited ZnSe Thin Films
- W-Doped Vanadium Oxide Thin Films Prepared by Reactive Magnetron Sputtering
- Effects of Cu Addition on Microstructure and Adhesion Properties of Ti-Al-N Nanocomposite Films Deposited by Magnetron Sputtering
- Influence of Rare Earth on the Peeling Properties of Ultra-Thin Copper Foil with Carrier
- Mechanical Instability of Wedge-Shaped Cr Films Quenched by Silicone Oil during Deposition
- Solution-Based Metal Induced Crystallization of Amorphous Silicon Films
- Dependence of the Coating Carbon Layer Configuration of Cordierite Monolith on Coating Reaction Conditions in Methane Decomposition
- Investigation of Corrosion Resistant of Al-Zn-Si-Re-Mg Coating
- Microstructure and Wear Properties of TiC/Fe-Based Composite Coating Prepared by PTA Weld-Surfacing Process
- Microstructures and Wear Resistance of Si-Al-Y Co-Deposition Coatings on γ-TiAl Alloy
- Study on Surface Modification of Aluminum Alloys by Silicate-Based Hybrid Coating
- The Investigation of Abrasive Jet Polishing on the Linear Micro-Channels Surface of SKD61 Mold Steel
- The Property Comparison of Coating Prepared by Oxygen-Acetylene Spray Welding Technology and High-Frequency Induction Remelting Technology
- Comparative Study of the Cyclic Oxidation Resistance of NiCrAlY and NiCoCrAlY Coatings
- The High Temperature Oxidation Resistance and Anti-Oxidation Mechanism of Plasma-Sprayed NiCrAlY Coatings on Stainless Stell
- A Porous TiO2 Coating with Vermiform Morphology Formed on Ti through Micro-Arc Oxidation
- Effect of Atmosphere Composition on Lifetime and Oxidation Behavior of EB-PVD TBC with NiPtAl Bondcoats
- Effect of Thermal Cycling on Lifetime and Failure Mechanism of EB-PVD TBC with NiCoCrAlYZr Bondcoats
- Effects of Conductive Pigments on the Anti-Corrosion Properties of Zinc-Rich Coatings
- Electrodepositing Ir Film at Constant Current in NaCl-KCl Molten Salts
- Evolution of Microstructure and Properties of a Disk Cutter Ring Material during Carburization and Heat Treatment
- Experimental Investigation on Anti-Fatigue Function of Gear Surface with Grid Micro-Morphology
- Hydrothermal Synthesis of Lead Titanate Epitaxial Film for Non-Volatile Memory Device Application
- Synthesis and Surface Properties of SiO2 Modified Fluorosilicone Acrylic Copolymer Hybrids
- Interfacial Failureof SiN/GaAs Film/Substrate BilayersInduced by Nanoscratch
- Ni-P-Diamond Composite Coating on Friction Shims
- Microstructure Characteristic of Laser Cladding Ceramic Layer on High Cr Cast Steel Surface
- Preparation of Superhydrophobic Coating from Fluorine-Containing Acrylate Polymer and Polysiloxane with Nano-SiO2
- Electrochemical Corrosion Behavior of Corrosion-Resistant Steel for Cargo Oil Tank
- Effects of Friction Load and Ultrasonic Vibration on the Tribological Properties of Al2O3/Al2O3 Ceramic Friction Pairs under Liquid Paraffin Lubrication
- Research on the Microstructure and Performance of Co-Based Alloy Surfacing Layer
- Fabrication of YBa2Cu3O7-δ Superconducting Film on NiW Alloy Using Electrophoretic Deposition
- Effect of Laser Cladding Al3Ti-Based Coatings on the Wear and Corrosion Resistances of AA6063 Aluminum Alloy
- Application of WS2 in Solid Lubricant Coating for Metal
- Electroless Ni-P Plating on Mg-7Al Alloy by Chemical Conversion Pretreatment
- Synthesis and Characterization of New Mesoporous Silica Film Materials for Explosive Detection
- Molecular Dynamics Simulation of the Influence Factors of Particle Depositing on Surface during Cold Spray
- Chapter 13: Materials Forming
- Simulation of Microstructure Evolution on Copper, Aluminum and Alloy during ECAP
- Comparative Study on Compression Deformation Behaviors of Cast and Extruded AZ31 Alloys
- Dynamic Strain Aging during Tensile Deformation of Extruded AZ81 Magnesium Alloy
- Die Wear Analysis of Spur-Gear Shaft Hot Extrusion Process
- Forging Effect of Horizontal V - Shaped Anvil for Heavy Axial Forgings
- Influence of Temperature Difference on Front End Bending in Hot Slab Rolling
- Development of Cyclic Rotating Bending Process for Microstructure Control of AZ31 Magnesium Alloy Tube
- FEM Analysis of Glass Lens Molding Press
- Research on Finite Element Simulation and Test of Two-Pass Deep Drawing Forming for Conical Parts
- A Study on Initial Blank Design to Minimize Earing in Multi-Stage Deep Drawing Process for Rectangular Cup Using High Strength Steel Material
- Deformation Behavior of AZ31 Magnesium Alloy at Elevated Temperature
- Development of Radial-Axial Ring Rolling Experimental Equipment and Calculation of Ring Rolling Forces
- Extrusion of Powder/Solid Clad Rods for a Desirable Hole Ratio in Powder Region
- Heat Spinning Deformation Technology of 7A04 Loading-Wheel
- Statistical Study on Correlation between Design Variables and Shape Errors in Flexible Stretch Forming Process
- Study on the Slab Design of Medium Plate Hot Rolling
- Surface Roughness Analysis of Metal Spun Parts
- The Design and Simulation of Circuit for Electromagnetic Force Assisted Line Heating Device
- Numerical Simulation of Large-Sized Pure Aluminum Rod under Multi-Pass ECAP
- Impact Analysis of Microstructure Evolution in Hot Rolling of H-Beams
- Optimization of Pre-Forging of the Aircraft Wheel Hub by FEM
- Analysis of Linear Defects of Cold-Rolled Galvanized Sheet
- Study on Developing Q345XJ by UFC in the CSP
- The Mathematic Model of Deformation Resistance of S50C Medium Carbon Steel in Hot Rolling Process
- Simulation of Die Gap Variation in Temperature Field Distribution of High Strength Steel Hot Stamping Process
- Simulation and Optimization of Die Forging Process for High Pressure Valve Bonnet
- Work Roll Temperature Prediction Model in Hot Strip Mill Based on Two Dimensional Alternating Difference Method
- Analysis of Effect of Process Parameters on Warpage of a Automobile Bumper Injection Molded Parts
- The Numerical Model of Axial Force for 4-High Mill
- Research on Deformation of TC4 with Complex Profile in Hot Rolling
- A Novel Three-Dimensional Direct Controlled Cell Assembling System
- The Hot Pressing Process Optimization of Ti(C, N) Matrix Nano-Composite Ceramic Die Materials with the Back Propagation Neural Network and Immune Genetic Algorithm
- A New Method for Quantitatively Evaluating Defects of the Green Body in Injection Moulding Based on X-Ray Digital Radiography
- Modeling Powder Extrusion Pastes for Forming 410L Stainless Metallic Honeycombs
- Chapter 14: Materials Machining
- Research on the Cutting Characteristics of Coated Tools on End Milling Nickel-Based Superalloy Mar-M247
- The Identified Principle of Machining Conditions and its Application in NC Machining
- The Theoretical Analysis and Application of the Ultra-Precision Machining the End Surface of Stop Valve’s Valve Flap with the Diamond Facing Tool
- A Dynamic Observation Concept to Keep Water-Soluble Coolant in Normal Condition for Long Time
- A Visualization Study of Abrasive Flow Variation in Abrasive Air Jets
- Dry Machining of T6061 Aluminium Alloy Using Titanium Carbonitride (TiCN) Coated Tools
- Effects of Mixing Chamber Shape on Cutting Performance in Abrasive Water Jet
- Evaluation Influences of Residual Stress on Machining Aluminum Part of Cooling Plates
- Experiment Studies of Nd:YAG Laser Assisted Dressing Technique for Metal-Bonded CBN Grinding Wheel by Crankshaft Grinding
- Influence of Tooth Errors and Truing Principles of Grinding Wheel Abrasion for Machining Arc Enveloping Worm
- Micro-Channel Fabrication on Quartz Crystals by a Micro Abrasive Air Jet
- Microgrooving Using an Ultrafine Wire Tool
- Study of the Wear of Drills in Dry Drilling of NM360 Steels
- Analysis of Plunge Milling Force and Tool Deformation on Cr12
- Determination of the Cutting Area Considering the Tool Slenderness Ratio for the Development of a 5-Axis Impeller Machining Automation CAM Module
- Experimental Research the Cutting Force of the 40Cr Circular Cone Turning
- Influence of Dielectric Jet Flushing during Electro Discharge Diamond Surface Grinding Process
- Modeling and Experimental Study on Cutting Force of Diamond Circular Saw in Cutting Granite Using Response Surface Methodology
- Study on Arithmetic of Surface Damage Ratio in High Speed Machining of Graphite Based on Matlab Image Processing
- Wear Mechanism of PVD TiAlN Coated Cemented Carbide Tool in Dry Turning Titanium Alloy TC4
- Research on Grinding Temperature of a New Diamond Grinding Wheel
- Study on Micro-Topography Characteristics of EDM Surface
- A Kind of Optimization Model on Turning Process Based on Productivity and Cost
- Recent Development of Parameter Optimization for Metal Cutting and Grinding Processes
- Research on Tool Wear Rate of Powder Mixed near Dry Electrical Discharge Machining
- The Study of Silica Sol with Great Particle Size for the SiO2 Dielectric CMP
- Analysis of the Vibration Mechanism in the Turn-Milling Machining of Micro-Miniature Shafts
- Chapter 15: Welding & Joining
- Atmospheric TIG Arc Diagnostics with a Low Disturbance Electrostatic Probe
- Corrosion Resistance Prediction of Laser Tailor-Welded Blank Based on Partial Least Square
- Distribution of Magnetic Flux Density and Magnetic Force in EMR
- FEA Simulation of Clinching Process Based on GTN Damage Model
- Influence of 0 Degree to the Shoulder of the Friction Stir Welding on AA 6063 and AA 7075
- Measurement of the Surface Tension of Liquid Metal-Droplet in Arc Welding
- Prediction and Control of Weld Width of Deep Drawing Steel Laser Tailored Blanks
- Research on Repair Welding Processes of a Bainite Steel Frog
- Research on the Usability of the Defective Grid Structure
- Effect of Current Waveform on Droplet Oscillation in GMAW
- Effect of the Wire Temperature on the Weld Formation in GMAW
- Effect of TiH2 Composition on Porous Stainless Steel and Titanium Hydride Composite Synthesized by Spark Plasma Sintering
- Prediction Model of Droplet Size in Low-Current GMAW
- Prediction of Welding Deformations of CRH380 Aluminum Alloy Side-Wall with Equivalent Thermal Load Method Based on Inherent Strain
- The Compulsively Short Circuiting Transfer Phenomenon Study in Rotational Arc MAG Welding
- A Study of Material Flow Behavior in Thickness Direction in Friction Stir Welding of 7075 Alloy Plate
- Dissimilar Friction Stir Spot Welding without Key Hole between AZ31B Magnesium Alloy and 5052 Aluminum Alloy
- Optimization of Parameters and Research on Joint Microstructure of Resistance Spot Welding for 316 Stainless Steel
- Characteristics Evaluation of Weld Metal Zone Welded with Various Repair Welding Filler Metals
- Evaluation of Effect of Welding Methods to Corrosion and Hardness Characteristics of Welded Zone
- Research on Three Microcosmic Interface Defects of Titanium/Steel Laminates Manufactured by Explosive Welding
- Simulation Research on Relieving Welding Residual Stress by Vibratory Stress Relief Technology
- Effect of Welding Parameters on Temperature Field during Twin-Wire Submerged Arc Welding of X80 Pipeline Steel
- Prediction of Weld Parameters in Gas Metal Arc Welding Process Using Curve Arc Fitting Techniques and Graphical Methods
- Chapter 16: Laser Processing
- Experimental Investigation on Femtosecond Laser Ablation of Polycarbonate
- Experimental Study of Low-Pressure Water Jet Assisted Laser Processing of Al2O3 Ceramic
- The Optimization Study about Technological Parameters of YAG Laser Precision Cutting Stainless Sheet
- Ultrafast Laser Machine Based on All-Fiber Femtosecond Laser System
- Characterization of TC17 Titanium Alloy Treated by Square-Spot Laser Shock Peening
- Laser Processing Speed vs Morphology of Glazing Ceramics
- Experimental Research on Flight Trajectory of Edge Electron of the Electron-Beam in the Electron Gun of Furnace
- Study of Displacement Value of the Electron-Beam in the Electron Gun in Electron-Beam Furnace
- Chapter 17: Casting and Solidification
- Microstructures and Properties of Twin-Roll Casting 7050 Aluminum Alloy Strip
- Effect of Casting Design to Microstructure and Mechanical Properties of 2 Mm Twdi Plate
- Effect of DC Casting Processes on Microstructure of AlCu4.5Mn0.8 Alloy
- Grain Refinement of 6061 Alloy by Low-Voltage Pulsed Magnetic Field Treatment
- Effect of Annular Electromagnetic Stirring Process on Solidification Microstructure of 7075 Aluminium Alloy
- Effect of Magnetostatic Field on Microstructure of 7075 Aluminum Alloy Strip Manufactured by Twin-Roll Casting
- Influence of Different Roll Casting Conditions on Casting Microstructure
- Simulation of Bridgman Directional Solidification Microstructure Using Phase Field Method
- Application of the Dynamic Soft-Reduction Technology on the No.4 Slab Continuous Caster of Bayi Steel
- Effects of Argon Partial Pressure on Interfacial Shape of Porous Copper under Unidirectional Solidification
- Numerical Simulation on Mold Electromagnetic Eccentric Stirring and Central Segregation of Round Bloom
- The Study on Microstructures and Properties of the Direct Squeeze Casting Al-Zn-Mg-Cu-Zr-Sc Alloy
- Die Casting Mold Design of Auto Oil Pump Bracket
- Analysis of Elemental Segregation in a Microalloyed Cast Steel
- Chapter 18: Geology and Mineral Processing
- Mineral Processing Experiment of Copper Mineral in Yunnan Province
- Mineral Processing Experiment of Quartz from Gold Ore Tailing
- Analysis of Tight Gas Reservoir Forming Condition in Gulong-Changjiaweizi Region, Northern Songliao Basin
- Shale Gas Seepage Mechanism and Pressure Dynamic Characteristics Research
- Geological Evaluation of Puzzle Reservoirs in Putaohua Reservoir of Weixing Oilfield
- Hydrocarbon Accumulation Characteristics in Cretaceous System Hailaer Basin
- The Analysis of Sedimentary Evolution Mode of Denglouku-Formation in Gulong Area of Songliao Basin
- The Optimal Selecting Technique on Well Logging Items and its Application to Identify Complex Lithology Profile
- Sedimentary Characteristics in Zhalainuoer Group in Cano Depression Hailaer Basin
- Stratigraphic Sequence Framework of Zao IV Group in Zaobei Oilfield
- Preparation of Ammonium Tungstophosphate-Calcium Alginate Composite Adsorbent and its Adsorption Properties of Rubidium
- Potential Indonesia Ores as Raw Material for Producing Iron Nugget
- Fractal of Grain Distribution in Sintered Ore with Variable Brazil Iron Ore
- Study on the Effect on Sintering Mineralization of Iron Ore
- Thermodynamic Studies on Selective Oxidation of Nb, P and C in Dephosphorization of Low Niobium Hot Metal
- Experimental Study on Carbothermic Reduction of Magnesia with Different Carbon Materials
- The Practice of Strengthening Pulverized Coal Injection
- The Investigation between Sedimentary Facies of Middle Cambrian and the Characters of Volcanic Rock, in Wenshan, Yunnan Province
- Analysis of Physical Structure and Chemical Composition of Oil-Water Transition Layer in Oil Gathering and Transportation System
- Resourcing Utilization of High Alumina Fly Ash
- Experimental Research of Fluorite Flotation Separation
- Comparison of Thermal Decomposition Kinetics of Magnesite and Limestone
- Experimental Study on the Recovery of Apatite from Ore Tailings in Hebei
Les mer
Produktdetaljer
ISBN
9783037856208
Publisert
2013-03-27
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
4700 gr
Høyde
240 mm
Bredde
170 mm
Dybde
138 mm
Aldersnivå
P, UP, 06, 05
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
2754