Produktdetaljer
ISBN
9783035711363
Publisert
2017-09-28
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
760 gr
Høyde
240 mm
Bredde
170 mm
Dybde
18 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
368
Redaktør
This book was collected from papers which were presented on the annual International Symposium on Advanced Material Research (ISAMR 2017, Seoul, South-Korea, on March 17-19, 2017). The collection will be interesting for many researchers and engineers whose activity related to research in area of materials scinces, materials processing technologies and application of modern materials in the different engineering areas.
Les mer
<p>ISAMR 2017</p>
<p>Selected, peer reviewed papers from the International Symposium on Advanced Material Research (ISAMR 2017), March 17-19, 2017, Seoul, South-Korea</p>
- Preface, Committee, Sponsor
- Chapter 1: Polymers and Composite Materials
- Pipe Stiffness Prediction of Buried Glass Fiber Reinforced Polymer Plastic (GFRP) and Polymer Mortar Pipe
- Ring Deflection Prediction of Pipe Composed of Glass Fiber Reinforced Plastic Outer Layers and Polymer Mortar Inner Layer Section
- Biocomposites of Poly(Lactic Acid) and Cellulose Nanofibers from Cassava Pulp
- Characterization of Carbon Black Filled PDMS-Composite Membranes for Sensor Applications
- Study on Life Cycle Assessment for Composite of Transportation Vehicle Structure
- Effect of Aging on Characterization of Sr-Modified Stir Cast A356/Al2O3 Composite
- Preparation and Characterization of the Na2Ti3O7: ABS/Na2Ti3O7 Composites
- Thermal Performance Test and Improvement for Phase Change Material Composite through Nucleating Additive
- Preparation and Properties of Additive Polysiloxane/POSS Hybrid Composites
- Preparation and Characterization of Waterborne Fluorinated Polyurethane-Acrylate
- An Experimental Study on the Structural Behavior of Water and Wastewater Supply GFRP Pipe
- Study on the Development of AlN Particles Synthesized by Gas/Liquid Reaction In Situ
- Fabrication and Characterization of Magnetic Nanocomposite Powders in Hematite-Ca System by Mechanical Alloying
- A Method for the Production of Large Sized Al-B4C-Al2O3np Nanocomposites through Liquid-State Process
- Preparation of Telechelic Hydroxyl Low Molecular Weight Fluoropolymers
- Finite Element Simulation of Cylindrical Projectile Penetrating Composite Laminate
- Buckling Analysis of Pultruded Fiber Reinforced Polymer Plastic Plate: Application of Simplified Buckling Analysis
- Multi-Objective Optimization Design of CFRP Winding Mortar Barrel with Metal Liner Based on MOPSO
- Chapter 2: Functional Ceramics
- Properties of Alumina-Titania Coating Formed by a New Multi-Chamber Gas-Dynamic Accelerator
- Effect of Bi2O3 Content on Properties of Lead Silicate Glass for Microchannel Plate
- Properties of the Functionally Gradient Chromium-Niobium Carbide Coating Obtained by Thermo-Reactive Deposition Technique
- RETRACTED: First-Principles Study of Advanced Nuclear Materials: Defect Behavior and Fission Products in U-Si System
- Chapter 3: Materials for Micro- and Optoelectronics
- Temperature Characteristics of Silicon-Polymer Hybrid Material Photonic Resonator
- A Process Study of Organic/Inorganic Film Materials Deposited by ICP-PECVD at Low Temperature
- The Stability Effect of Atomic Layer Deposition (ALD) of Al2O3 on CH3NH3PbI3 Perovskite Solar Cell Fabricated by Vapor Deposition
- Low Frequency Dielectric Relaxation and Charge Transport in Bi12TiO20 Photorefractive Sillenite Crystals
- Polyethylene Terephthalate Thin Film Incorporating Green Emitting Up-Conversion Phosphor
- TiO2-Doped Single-Mode Fiber as Active Material for Raman Lasers
- Chapter 4: Processing Technologies
- Modelling of Surface Roughness in Ultra-High Precision Turning of an RGP Contact Lens Polymer
- Study on Fabrication and Bonding Interface of Explosive Welded Steel/Aluminum/Steel Composite Plate
- Effect of Visible Light Absorber Containing Quinoline Yellow, Azorubine and Green S on Process Control in Microstereolithography
- Characterization of Planar Dimensional Capabilities in Selective Photopatterning of Diacrylate and Epoxy Monomers
- Acoustic Emission in Stainless Steel End Milling with Carbide Tools
- Influence of Nitrogen Atmosphere on Weld Nugget Morphology during Resistance Spot Welding of 304L Stainless Steel
- Enhancement of the Gray Cast Iron Properties by Adding Chromium Element
- Study on Evolution of Plastic Deformation of Brass Band under Impact Load
- Chapter 5: Chemical Engineering
- Preparation of Mesocarbon Microbeads (MCMB) from Suspensions of a Synthetic Naphthalene Isotropic Pitch
- Biodecolorization of Synthetic Dyeing Wastewater by Immobilized Halotolerant Cells
- Adsorption of Cu(II) onto Cross-Linked Chitosan Coated Bentonite Beads: Kinetic and Isotherm Studies
- Study on Ozone Bleaching of the Ammonium Sulfite Wheat Straw Pulp
- An Investigation on the Adsorbent Material of Fly Ash
- Direct Methanolysis of Oleaginous Yeast Biomass (Pseudozyma parantarctica) to Microbial Biodiesel
- Effect of Powder Activated Carbon Circulation Rate on SO2 Adsorption
- The Preparation of Magnetic Particles and Optimization Research
- Chapter 6: Materials for Biomedical Application
- Preparation and Characterization of Pentoxyverine Citrate Micro-Nano Particle Aggregations
- Chapter 7: Building Materials and Structures
- Effect of Second Loading on the Instrumented Continuous Flight Auger Concrete Pile on Porous Soil
- Anti-Seepage Evaluation of Reinforcement Effect for Fengchan Earth Dam
- Review on Research of Cement Grinding Aids and Certain Problems
- Experimental Study on the Performance of Compound Improved HLLS (High Liquid Limit Soil) with Various Curing Agents
- Study on Welding Deformation and Residual Stress of H-Section Beam Based on Finite Element Method
- Study on the Design and Construction Quality Control of AC-13 Rubber Asphalt Pavement
- Thermal Treatment of Self-Compacting Concrete in Cast-In Situ Construction
- Influence of Void in Mix on Rutting Performance Hot Mix Asphalt Pavement with Crumb Rubber Additive
- The Correlation between Splitting Tensile Strength and Flexural Strength of Self Consolidating Concrete
- Experimental Study on Performance of Short-Bonding Interface between CFRP and Concrete
- Strength of Modified Concretes Curing without Care in Dry and Hot Climate Conditions
- Characteristics of Alkali-Activated Controlled Low-Strength Material Derived from Red Mud-Slag Blends
Les mer
Produktdetaljer
ISBN
9783035711363
Publisert
2017-09-28
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
760 gr
Høyde
240 mm
Bredde
170 mm
Dybde
18 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
368
Redaktør