Produktdetaljer
ISBN
9783037857410
Publisert
2013-09-18
Utgiver
Trans Tech Publications Ltd
Vekt
3370 gr
Høyde
240 mm
Bredde
170 mm
Dybde
92 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1840
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Energy and Environmental Protection (ICEEP 2013), April 19-21, 2013, Guilin, China.
The 334 papers are grouped as follows:
Chapter 1: Development and Utilization of Solar Energy;
Chapter 2: Development and Utilization of Biomass Energy;
Chapter 3: Development and Utilization of Wind Energy;
Chapter 4: Nuclear Energy and Nuclear Engineering;
Chapter 5: Hydrogen, Fuel Cell and Related Technologies;
Chapter 6: Storage Battery and Other Energy Sources;
Chapter 7: Energy-Saving Technology and Energy Conservation;
Chapter 8: Energy Materials and Technology;
Chapter 9: Energy Chemical Engineering and Processes;
Chapter 10: Energy Security and Clean Use;
Chapter 11: New Energy Vehicles, Engine and Electric Vehicles;
Chapter 12: Building Materials and Technologies, Energy-Saving Buildings, Civil Engineering.
Les mer
<p>Selected, peer reviewed papers from the 2013 2nd International Conference on Energy and Environmental Protection (ICEEP 2013), April 19-21, 2013, Guilin, China</p>
- Preface and Conference Organization
- Chapter 1: Development and Utilization of Solar Energy
- A Power Prediction Method for Photovoltaic Power Station Based on Neutral Network Using Numerical Weather Information
- A PV Cell Mathematical Model and MPPT Algorithm in PSCAD
- A Simple and Accurate Modeling Method for Photovoltaic Cells Using Explicit Equations
- Application of Prediction Algorithm of Photovoltaic Power in Distributed Photovoltaic Volatility Control
- Application of Solar Energy and Gas Compound Hot Water Supply Technique
- Application of Solar Energy Integration Technology in Metallurgy
- Comprehensive Utilization of Solar Energy and Building Energy Saving
- Design and Implementation of Dual-Axis Solar Tracking System with GSM Fault Reporting Capability
- Exploration of Composite Solar and Wind Power Generation Device Control
- Optimal Design for Photovoltaic and Photothermal Hybrid Solar Cells of Solar Powered Aircraft
- Preparation of Anodic Aluminum Oxide Nano-Templates on Polycrystalline Silicon Substrates
- Research of the Model and MPPT Algorithm of Solar Cells
- Research on Control Simulation of Photovoltaic Power Generation System Based on MPPT
- Research on Mode of Solar Automatic Tracker
- Research on the Angle of Quasi-Fixed Solar Collector
- Synthesis of Mixed TiO2-Rare Earth Up-Conversion Material and Application in the Dye-Sensitized Solar Cells
- The Design of Remote Analysis and Control for Photovoltaic System Based on Computer Software
- The Performance of Thermal Storage Tank in Solar Energy System
- The Analysis of Solar-Earth Source Heat Pump Combined Operating
- Study of MPPT Simulation Based on Power Prediction Method and Variable Step Incremental Conductance Method
- Modeling and Control Technology of the Z-Source Inverter PV Grid-Connected System in the New Energy Equipment
- A Photovoltaic and Commercial Power Complementary Hybrid System for University Classroom Energy-Saving Lighting
- A Study of the Reliable Receivers for Dish/Stirling Solar Electric Generating System
- Asymmetric Voltage Sag Control Strategy for Grid-Connected PV System Based on PIR Controller
- Calculation and Distributive Characteristics of Solar Radiation in Henan Province
- Design and Implementation of a High Power Battery Charger of a Hydroelectric-Connected PV Plant
- Design Methods of the Space Photovoltaic Support
- Effect of Solvent Annealing for Efficient Polymer Solar Cells
- Effects of Progressive SiNx Films on the Performance of Polycrystalline Silicon Solar Cells
- Exergetic Analysis of a Solar Thermal Power Plant
- Experimental Research on a Novel Solar Water Heating System by Using Loop Heat Pipe
- Key Technologies Research of New Generation Concentrating Photovoltaic
- Preparation and Optical Properties of Gallium-Titanium Codoped Zinc Oxide Transparent Conductive Films for Solar Cells
- Research Progress of Solar Pond Technology
- Study on Single-Axis Tracking PV System Measurement
- Study on the Output Power of the PV Power Plant Model Based on ANFIS
- The Research and Design of Automatic Tracking System of the Light Based on the LOGO Controller
- The Status and Trends of Crystalline Silicon PV Module Recycling Treatment Methods in Europe and China
- Chapter 2: Development and Utilization of Biomass Energy
- Acid-Alkaline Two-Stage Pretreatments of Corn Stover for Enhancing Enzymatic Saccharification
- Analysis on Biomass Resources and Potential of Developing Biomass Energy in Yunnan Province
- Comparison of Different Pretreatment Methods to Increase Hydrogen Production from Cornstalk
- Comparison of Methods of Wood Chip Moisture Evaluation
- Conversion of Fructose to 5-hydroxymethylfurfural Catalyzed by Coaled Carbon-Based Solid Acid
- Effect of Acid Curing Agent on the Foaming of Liquefied Bamboo-Based Resol Resin
- Electric Heating Biogas Digester Experimental Research and Numerical Simulation of Fluent
- Experiment Research and Mechanism Analysis on the Thermal Properties of Solar Anaerobic Digester
- Experimental Investigation of Biomass Slag Deposit on the Surface of Super-Heaters
- Experimental Study on Oxygen-Enriched Combustion Characteristics of Pure Cotton
- Freeze-Thaw and Sulfuric Acid Pretreatment of Wheat Straw for Fermentable Sugar Release
- Improving Calorific Value and Reducing Corrosiveness of Biological Oils
- Key Factors of Thermal Efficiency Test Protocols for Household Biomass Cookstoves
- New Biogas Heater Burner 3D Virtual Design
- Optimizing the Formula for Rice Husk Pellet Fuel Using Orthogonal Array Testing
- Research on Optimization Model of China's Bio-Fuel Ethanol Subsidy
- Single Cell Oil and Lipid-Producing Microorganism
- Study on Biomass Carbonization for Bio-Char Production
- Study on Drying Characteristics of Microalgae under Different Conditions
- Study on Mechanism of Low Temperature Co-Pyrolysis of Duckweed and Flame Coal
- Study on the Conditions of Straw Powder Degradation to Produce Reducing Sugar in Mixed Cultivation
- Study on the NaOH Modified Bagasse as Briquette Binder
- Syngas Production from Biomass Gasification Using Copper Slag Catalysts
- The Advancement of Algal Biomass: A Review
- The Effect of Light on the Growth and Product Accumulation of Chlorella
- The Interaction Mechanism of Biomass and Coal Co-Gasification
- The Study of Oxidative Stability of Castor Oil Based Biodiesel
- Experimental Study on Combustion Characteristics of Biomass Charcoal in Air and O2/CO2 Atmosphere
- Analysis of Chemical Constituents of Volatile Oil Fruit of Cinnamomun amphora(L．)Presl GC-MS
- Analysis of Environmental Cost Accounting of Forest Biomass Power Generation
- Base-Catalyzed Transesterification of Soybean Oil by Ultrasonication
- Biohydrogen Production by Co-Fermentation of Starch Wastewater and Sludge under Thermophilic Condition
- Conversion of Glucose into 5-Hydroxymethylfurfural with WO3 - MoO3 Mixed Metal Oxides
- Effect of Acetic Acid on Ethanol Fermentation by Engineered Escherichia coli SZ470
- Effects of Urea Treatment on the Structure and Properties of Wheat Straw
- Establishment of Methanogenesis Dynamics Model in the Process of Methane Fermentation with Manure Wastewater
- Improving Biogas Production and Biodegradability of Acid Hydrolytic Cotton Stalk with Addition of Nutritive Salts and Complex Anaerobic Cellulose Decomposing Bacteria
- Optimization of Simultaneous Saccharification and Fermentation for Ethanol Production from Steam-Exploded Cotton Stalk
- Pentosan Extraction from Poplar Treated by Green Liquid
- Physico Chemical Analysis of Linseed Oil and its Blends as a Potential Fuel for Diesel Engine
- Preparation of Small Molecular Hemicelluloses from Coconut Shell
- Selective Pyrolysis Behaviors of Willow Catalyzed via Phosphoric Acid
- Solid Super Acid Base Co-Catalyzed Transesterification of Soybean Oil Using Ultrasonication
- Study on Ethanol Production from Sweet Sorghum Straw
- Study on the Characteristics of the Aquatic Vegetables Waste Fermentation to Biogas
- The Biological Sources of the Organic Matter in Poyang Lake Sediments
- The Cultivation Technique for Increasing the Stalk Sugar Content of Energy Plant Sweet Sorghum in Yellow River Delta
- Elevated N Supply Reduces the Inhibition of Growth and Photosynthesis Caused by Salinity in the Bioenergy Plant Hybrid Pennisetum
- Study on Characteristics of Ammonium Nitrogen Adsorption by Biochar Prepared in Different Temperature
- Chapter 3: Development and Utilization of Wind Energy
- Direct Drive Permanent Magnet Synchronous Wind Generator Maximum Power Tracking Control
- A Wind-Thermal Hydropower Coordination Control Strategy Based on Multiple Constraints of Large-Scale Wind Power Integration
- An Investigation of the Low Performance of the First Wind Farm in Thailand: A Case of Poor Wind Turbine-Site Matching
- Development of a Wind Power Generation Experiment Device
- Improve the Forecast of Surface-Layer Wind in Wind Power Farm with WRF-3DVAR
- Mechanism of Large Scale Cascading Trip-Off of Wind Turbine Generators
- Modeling and Simulation of the Brushless Double Rotor Motor for the Novel Wind Power Generation System
- Offset-Free Model Predictive Control for Wind Power Generation Systems
- Study on Different Impacts on the Reliability of Grid Connecting with the Offshore and Onshore Wind Farms
- The Dynamic Interactional Model of SVC and DFIG to Maintain Grid Voltage
- The Wind Power Industry in China: Status and Issues
- Vibration Analysis on the Megawatt-Class Wind Turbine Based on the Rigid-Flexible Coupling Model
- Peak-Load Regulating Adequacy Evaluation in Wind Power Accessed System Considering the Correlation of Wind Farms
- A Study on Water Pumping by Using a Small Multi-Blades Windmill for Used in a Remote Area
- China Wind Power Development Status and Trends
- Control Strategy of Wind Turbine Power Limitation under High Winds
- Coordinated Control of Large Scale Offshore Wind Farms Integrating into VSC-HVDC System
- Detection of Flicker Caused by Wind Farm Based on Mathematical Morphology Filter and Hilbert-Huang Transform
- Fuzzy Comprehensive Appraisal of China’s Offshore Wind Industry Competitiveness Based on SWOT
- Modeling and Simulation of Variable-Pitch Wind Power Generation System
- Numerical Simulation of Influence with Surface Contamination on Aerodynamic Performance of Dedicated Wind Turbine Airfoil
- Optimal Configuration Method of Hybrid Energy Storage System for Wind Farm
- Probabilistic Available Transfer Capability Calculation of Wind Farm Incorporated Power System
- Reliability Assessment of Power Generation and Transmission System Considering Wind Farm Based on Monte-Carlo Methods
- Research on Fault Diagnosis Method of Wind Turbine Based on Wavelet Analysis and LS-SVM
- Research on the Compensation Coefficients of the Improved MPPT Control Based on Reduction of Tracking Range
- Research on Wind Turbine Control System Based on CAN Bus
- Running State Study on Wind-Driven Generator Gearbox
- Strength Analysis of Bolt Connection on Yaw Gear of the MW Wind Turbine Generator System
- Study of Reactive Power Compensation for Improvement of Low-Voltage-Ride-Through Capability of Wind Farm
- Study on Wind Speed Forecasting Based on STC and BP Neural Network
- The Application of Energy Storage System in Wind Power Integration
- The Coordination Control Method of Dynamic Reactive Power Compensation Equipment Based Multi-Objective
- Wavelet Packet Diagnosis for Wind Turbine and Vector Control for Wind Power Generation System
- Performance Research on Tension Leg Platform of Floating Offshore Wind Turbine
- Application of Portfolio Theory Based on CVaR in Determining Optimal Spinning Reserve with Consideration of Load and Wind Power Uncertainties
- Application of Power Communication System in Wind Power Plant
- Impact of Large-Scale Integrated Wind Farms on the Voltage Stability of Regional Power System
- Reserve Capacity Optimization of the Regional Power System with Wind Farms
- Wavelet-ARMA Model Revised by Neural Network to Predict Wind Power
- Chapter 4: Nuclear Energy and Nuclear Engineering
- A Conceptual Study on Helium-Cooled Solid Breeder Blanket for Prototype CH DEMO
- Optimization Design and Analysis for the First Wall of CH HCSB TMB Based on Thermal Hydraulic
- The Experimental Research on Uniformity of Argon Inductively Coupled Plasma at Different Cylinder Heights
- Analysis of the Safety of Nuclear Power Plants
- Design and Numerical Analysis of Oil-Cooled Cooler of Liquid Lead-Bismuth Loop
- Sustainable Development of Nuclear Energy and Study on ADS in China
- Technology Selection for Emergency Radioactive Wastewater Treatment
- Chapter 5: Hydrogen, Fuel Cell and Related Technologies
- Challenges Facing Hydrogen Fuel Cell Technology to Replace Combustion Engines
- Effects of CO on Performance of HT-PEM Fuel Cells
- Hydrogen Production from Ethanol Steam Reforming over Co-Ni/CeO2 Catalysts Prepared by Coprecipitation
- Investigation into Hydrogen Production in Hydrolysis of Sodium Borohydride in the Presence of Co-La-B Catalyst
- Preparation of CuO-Decorated Core-Shell Montmorillonite-TiO2 Colloids and their Photocatalytic Activity for Hydrogen Evolution from Water
- Sulfonated Polyphosphazene-Montmorillonite Hybrid Composite Membranes for Fuel Cells
- Visible Light Photocatalytic Hydrogen Evolution from Water Reduction Using Eosin y Containing Trace Vitamin B12 as a Light Harvesting Unit
- CFD Investigation into Internal Flows of PEM Fuel Cell for Optimal Performances
- Effect of Different Operating Conditions on MFC Performance
- Hydrogen Production via Sorption Enhanced Steam Reforming of Acetic Acid: A Thermodynamic Study
- Investigation into the Catalytic Ability of Fibrillar Co-Y-B Catalyst in Hydrogen Production from Hydrolysis of Sodium Borohydride
- Performance Study of Direct-Boron-Hydrogen Fuel Cells (DBFC) Applied in Micro Power Systems
- A μDMFC Stack with Hybrid Mass Transportation Scheme
- Chapter 6: Storage Battery and Other Energy Sources
- Discussion on the Li-Ion Battery Health Monitoring and Remaining-Useful-Life Prediction
- Thermal Security Analysis of Lithium-Ion Batteries Based on Electro-Thermal Modeling
- Microwave Synthesis of MnO2/C and its Applications in Zinc-Air Battery
- Preparation and Study of Zinc-Air Batteries with Carbon-Supported Amorphous MnO2 Catalyst
- The Study on Technology of Ocean Wave Energy Generation
- Close-Packed Al2O3 Nanoparticles/Waterborne Polyurethane Layer-Coated Polyethylene Separators for Lithium-Ion Batteries
- Dynamic Measurement and Estimation of Power Battery Residual Capacity
- Hard Carbon Prepared from Willow Leaves Using as Anode Materials for Li-Ion Batteries
- Preparation of Li2FeSiO4/C Composite Cathode Materials for Lithium Ion Batteries by Carbothermal Reduction Method
- Dual Carbon Coating Used in the Preparation of LiFePO4/C Cathode Material
- Renewable Generation and its Integration in the Power System of Green Island
- VRB/EDLC Hybrid Storage System with PID Controller Based on BP Neural Network
- Chapter 7: Energy-Saving Technology and Energy Conversation
- A New Thought and Method to Estimate and Design Power Capacity from Terminal Electricity Consumption (Power Load) in the Civil Airport
- A Research on Energy-Saving Technological Transformation of Cement Grinding System Based on FPP Grinding
- An Analysis of the Seasonal Energy Consumption of Culture and Education Comprehensive Building
- Analysis of Heat Distributing to Ensure Energy Saving
- Analysis of Natural Lighting Stadium Negative Effect
- Application of Heat Pump Energy-Saving Control Temperature Technology in Large Warehouse on Preservation Quality of Rice
- Comprehensive Evaluation of Energy Conservation and Emissions Reduction for Green Power Grid
- Energy-Saving Measures of a 1Mt/a Gasoline and Diesel Hydrofining Unit
- New Energy-Saving Elevator Energy Consumption Analysis and Simulation Based on MATLAB
- Chapter 7: Energy-Saving Technology and Energy Conversation
- Performance Evaluation of a Vertical U-Tube Ground Heat Exchanger Using a Numerical Simulation Approach
- Research on the Energy Consumption and Potential Emission Reduction of District Heating in the North of China
- Research on the Energy Consumption Efficiency Based on Generalized DEA Method with Cluster Analysis
- Study on Waste Heat Recovery of Soy Sauce Production Process in Jinshilongmen Brewery
- A Novel Two-Stage Ethylene Rankine Power Cycle with Cold Energy Recovery of LNG
- A Simple way to Estimate the Signal-To-Noise Ratio and to Save Energy
- Analysis about Main Influence Factors of Vehicle's Fuel Consumption
- Analysis on the Cycle Characteristics of Dual Swash Plate Stirling Engine
- District Energy-Saving Measures and their Selection Method
- Ground Source Heat Pump and Conventional Heat Sources to Match the Design and Operation Mode for Energy Saving
- How to Implement the Method that can Annually Save more Energy than the Corresponding Energy of Large Oil Field Output
- Hybrid of Daylight and LEDs in the Lighting Design of a Tunnel
- Optimal Design for the Room Temperature Control and Household Heat Metering System
- Problem and Solution of Frequency Conversion Transformation on Axial FGD Booster Fan in 600MW Unit
- Research on Coordination and Optimization Model of User's Electricity Energy Efficiency with Load of Diversity
- Study of Optimization Design and Energy Saving Effect Prediction of Rudder Bulb Based on CFD Technique
- Synergetic Utilization of Coal and Industrial Waste Heat in Power Generation System
- Water Supply Pumping Station Energy Consumption Analysis and Energy Saving Research Based on the Energy Consumption Coefficient
- Thermodynamic Analysis of Ethanol Diesel-Oil Alternative Fuel
- Chapter 8: Energy Materials and Technology
- Abnormal Heat Triggered by Pressure Change in a D/Pd Gas-Loading System
- Analysis of Chinese Natural Gas Interchangeability Predicted by Weaver Indices
- Crystallitic Structure and Thermodynamics of Magnesium-Based Hydrogen Storage Materials from Reactive Milling under Hydrogen Atmosphere
- Effects of FEC Additive on the Low Temperature Performance of LiODFB-Based Lithium-Ion Batteries
- Influence of Eu Substitution for Y on the High Temperature Electric Transport Properties of YBaCo4O7+δ
- Magnesium Hydride of Orthorhombic Crystal from High-Energy Ball Milling under Hydrogen Atmosphere
- One-Pot Synthesis of Carbon-Coated ZnFe2O4 with Excellent Electrochemical Performance as an Anode in Lithium Ion Battery
- Pyrolysis Characteristics of Long Flame Coal
- Structure Characteristics Analysis of Long Flame Coal
- Study of Influence Factors on Wettability of Coal Dust
- Study on Pre-Esterification of Trench Oil and Preparation of Bio-Diesel
- Study on Consist Property of High Wax and Super-Viscous Crude Oil
- Effects of Na and V Co-Doping on Electrochemical Performance of LiFePO4/C
- Influences of Precursor’s Processing Method on the Electrochemical Properties of Synthesized Lithium Vanadium Phosphate
- Sol-Gel Synthesis of LiFePO4/C Composite Cathode Material from FePO4/PANI
- The Preparation of Primary Battery Separator Using Polyamide Nonwoven and Nanofiber
- The Study of Theoretic Coated Carbon Amount and Excess Lithium in LiFePO4/C Synthesis by Means of Carbon Thermal Reduction Route
- Chapter 9: Energy Chemical Engineering and Processes
- Experimental Investigation of Emissions from Biodiesel
- A Novel Active Ni-Ce-Al-Mixed Oxide Catalysts for Oxidative Dehydrogenation of Propane
- Analysis of Extraction of Coal Oxidation Residue in NaOCl
- Calculation of Enthalpy and Entropy of Oil Vapor in Condensation Process
- Catalytic Cracking of Coker Gas Oil at High Reaction Temperature and Catalyst to Oil Ratio
- Effect of by-Products from Wet-Oxidation Explosion on the Growth and Fermentation of Saccharomyces cerevisiae
- Effects of Fuel Supply Advance Angle on Engine Thermal Efficiency and Emission Performance Fueled with Bio-Diesel
- Experimental Studies on H2-Rich Gas Production by Co-Gasification of Coal and Biomass in an Intermittent Fluidized Bed Reactor
- Process Improvement of a 1Mt/a Gasoline and Diesel Hydrofining Unit for Energy-Saving (II)
- Simulation of a Novel Chemical Looping System for Recovering Elemental Sulfur from Acid Gases Using Ca-Based Oxygen Carriers
- Study on the Kinetics of Chemical Looping Combustion of Copper-Based Oxygen Carrier
- The Preparation Methods of Fe2O3/Al2O3 Oxygen Carriers and their Chemical Looping Combustion Performance
- Effect of Oxygen Plasma Treatment on Bacterial Cellulose-Alginate Composite Sponge as a Yeast Cell Carrier for Ethanol Fermentation
- Esterification of Oleic Acid and Bioalcohols Using Immobilized Lipase
- Investigation into the Reactivity Behavior of CaSO4 with Coal Chars in the Chemical Looping Combustion System
- Numerical Simulation and Optimization of Urea-SCR Catalyst for Diesel Engine
- Research and Application of Floaters Produced from Water Treatment in Oilfield SZ36-1 as Profile Control Agent
- Study on Measurement and Simplified Model of Burning Rate of AP/HTPB Base Bleed Propellant under High Pressure
- Transesterifcation of Palm Olein Oil Using Na3PO4 as Heterogeneous Catalyst
- Transformation of Methane into Synthesis Gas Using the Redox Property of Pr-Zr Mixed Oxides: Effect of Calcination Temperature
- Experimental Study on Catalytic Combustion Parameters of Gasoline Vapor in Oxygen-Poor Condition
- Chapter 10: Energy Security and Clean Use
- A Performance Study of Coke Oven Gas Vehicle
- Analysis of Chinese Energy Security Based on Quantitative Evaluation Method
- Energy Security Assessment: A Review
- Impact Analysis of Integration of Coal Resources on China's Energy Security
- Index System Construction and Research of Inexact Influence Analysis Model of Energy Risk System
- Investigations of Energy Separation Effect in Vortex Tube for Different Gases
- Mapping the Energy Flows of Coal Utilization in China: The Methodology and Case Studies for the Year 2005 and 2010
- Process Analysis of Ocean Thermal Energy Used for Desalination
- Research on the Wear Characteristics of Injection Pump in Di-Engine Fueled with Dimethyl Ether
- Simulation of Chemical Looping Hydrogen Production Using Solid Fuel
- Study on Diesel Combustion Dust with ASE and HPLC
- The Use of Tailored Micro-Hydro System in Micro-Urban Scale as a Partial Presumption for Creating the Autarchic Micro-Urban Structures
- Development and Utilization of Green Energy in Hanjiang River Basin: Example from Xiangyang Section
- Corrosion Mechanism of 316L Stainless Steel in a Expansion Joint of Blast Furnace Gas Pipeline in a Power Plant
- Dynamic Simulation and Influencing Factors Analysis of Biofouling
- Effect of Different Biofouling Characteristics on Heat Transfer of the Heat Exchanger
- Hazard of Coal Mine Gas and its Preventive Measures
- Investigations of Energy Separation Effect in Vortex Tube for Real Gases
- The Effect of CO2 on Pyrite Transformation
- Causes Analysis of Wet Flue Gas Desulphurization Stack Rainout for the Thermal Powerplant without GGH and its Countermeasures
- Status Analysis of Energy Consumption, Supply and Conservation in Beijing
- Chapter 11: New Energy Vehicles, Engine and Electric Vehicles
- A Research on Compressed Natural Gas Engine Fuel Supply System for Rapid Prototyping Based on AMEsim
- Analysis and Research on Fire Risk of Electric Vehicle Charging and Swapping Station
- Analysis On-Board Charger to the Influence of Power Quality
- Effect of Excess Air Ratio on Idle Performance of a HCNG (H2+CNG) Engine with Different Hydrogen Blend Ratios
- Effect of Ignition Timing and Excess Air Ratio on Combustion Characteristic of Linear Engine
- Impact of Peak and Valley Period Partition on Load Curve of Distribution System with EV
- Influence of Piston Initial State on HCCI Combustion in Micro Free-Piston Engine Using Experiment Images and CFD Analysis
- Optimal Planning of Electric Vehicle Charging Stations Location Based on Hybrid Particle Swarm Optimization
- Power Generation System by Vehicle on the Downhill of Expressway
- Safety Research and Lightweight Design of Electric Vehicle Battery Protection Device
- Study on Zn-PANi Battery Characteristics Used for Electric Vehicles
- The Economic Benefit of Electric Taxi Based on Total Ownership Cost Model
- The Technical Modification and Performance Analysis of Diesel/LNG Dual Fuel Engines
- A New Power Allocation Strategy of Supercapacitor/Battery Hybrid Energy Storage System for Electric Vehicles
- Analysis on Harmonics Caused by Connecting Electric Vehicle Chargers with Power Network
- Application and Control of Brushless DC Motor for Electric Vehicle
- Bond Graph Modeling and Analysis of HEV System Based on Ravigneaux Planetary Mechanism
- Control Strategies for AC Motor of Electric Vehicles
- Effect of Ignition Timing on the Starting Characteristics for Linear Engine
- Energy Efficiency Assessment Study of Electric Vehicle Charging Network
- Experimental Research on the Effect of Excess Air Ratio on Turbocharged Lean-Burned CNG Engine
- Piezoelectric Vibration Energy Harvester in Electric Vehicles
- Remote Monitoring System Development for Electric Vehicles
- Research of Electric Vehicle Regenerative Braking Control Strategy Based on EHB System
- The Design of APU(Auxiliary Power Unit) Control Strategy
- Thermal Analysis of the Battery Box in Electric Vehicles
- Thinking and Suggestions to the Competitiveness of New Energy Vehicle in China
- Analysis Research of Technology Schemes of Reduction NOx Emission in Lean Burn Gasoline Engine
- Photovoltaic Electric Vehicle Charging System with the Function of Active Power Filter
- Chapter 12: Building Materials and Technologies, Energy-Saving Buildings, Civil Engineering
- Incorporate Design of SWH System with High-Rise Residential Building in Northern Guangxi Province - Principle of Design and Calculation
- The Simulation Analysis of Tunnel Wind Cooling System in Shenyang Area
- A Case Study of Retaining Wall Using Pre-Stressed High-Strength Concrete (PHC) Pile for Deep Excavation Work
- Based on MIDAS/CIVIL the Anchorage of Mass Concrete Temperature Field and Stress Field Simulation Analysis
- Coarse Aggregate Gradation Design Index and Method of Asphalt Mixture
- Concrete Exterior Wall Insulation without Network System
- Dynamic Responses of Red Sandstone with Fluid-Solid Coupling under Impact Loading
- Energy Consumption Simulation of the Air Conditioning System in Large-Scale Buildings
- Experimental Research of Arrangement Method of Prestressed Concrete Slab with Unbonded Reinforcement
- Material Properties of Bridge Deck Dedicated Interface Agent and Key Construction Techniques
- New Type of High-Strength Support in Deep Soft Rock Roadway
- Numerical Analysis on Hollow EPSRC Block and its Thermal Insulation Wall
- Performance of Hemp-Starch Concrete Composite
- Rebounding Method Application of Structure Concrete Compression Strength Detecting in Datong Area
- Reflection upon Energy Saving and Emission Reduction in Colleges in the Context of Low-Carbon City Construction
- Simulation of the Indoor Thermal Environment of Sunspaces-Attaching Passive Solar House in Shihezi of Xinjiang
- Study on the Green Earthen Buildings
- Study on Water Stability of Granite Asphalt Mixture
- Studying on Optimum Insulation Thickness of External Wall for Existing Residential Building Energy Saving Reform in Severe Cold Area
- The Analyses of Daylighting in High-Rise Office Buildings and the Design Essentials
- The Green Energy-Saving Design of Stadium
- The Guiding System Design of Medical Architectural Interior Space Take the Third People's Hospital of Nantong for Instance
- The Research of Mixture Ratio Factors on the Concrete Consumption Norm
- Ultrasonic Non-Destruction Detecting Method for Concrete Compression Strength
- Acid Attack on Cement Paste Containing Limestone Powder
- A Brief Review of the Relationship between Energy-Saving Buildings and Total Cost Management
- A Review of the Application of LCA for Sustainable Buildings in Asia
- A Study on the Energy Conservation Policy of South Korean Universities
- A Study on Building Energy Efficiency and Green Building
- An Intelligent Controlled External Shutter for Building Shading
- Analysis on Light Brick Research and the Application in China
- Arrangement Method Research of Prestressed Concrete Slab with Unbonded Reinforcement
- Comparison of Optical Smoke Density of Expanded Polystyrene without and with Cover Components Used in ETICS
- Daylight Factor for Energy Saving in Retrofitting Institutional Building
- Integrated Application of Marine Geophysical Technology in a Seawall Reinforcement Project
- Life Cycle Assessment for Building Envelope
- New Type Rural Residence Energy-Saving Effect Analysis in Northeast China
- On the Preparation and Properties of Luminous Concrete
- Practice of Government's Comprehensive and Whole Process Quality Supervision on Energy Efficiency Project in Civil Building
- Primary Research about Energy Consumption Analysis and Optimization Strategy of Office Buildings
- Research on Key Prestress Construction Techniques of Continuous Box Girder
- Research on the Calculation Method for Diagonal Shear Capacity of Steel Reinforced Lightweight Concrete Beams
- Rigid Polyurethane Foam Based on Modified Soybean Oil
- Studies on Energy-saving Control of the Whole Process of Construction Project
- Study on Structure Safety of the Tunnel Secondary Lining of Passenger Dedicated Line for High-Speed Railway during Service Period
- Study on the Green Building Evaluation Standard
- Study on the Performance of Cushion in the Rigid Pile Composite Foundation under Flexible Load
- Study on the Seismic Performance of Cavity Walls Constraint Masonry Construction
- The Analysis of Double-Nonlinearity Stability of Concrete Filled Steel-Tube Arch Bridge
- The Architecture Research of the Building External Shading and Building Energy-Saving System Based on the Intelligent Control
- The Influence of Fly Ash on the Crack Performance of Airport Pavement Concrete by Dumbbell Test Method
- The Research on the DEM Simulation of the Railway Ballast Tamping Process
- The Study on Design Method of the Sustainable Dwellings in Mountain Areas Based on BIM
- Study on Temperature and Stress Development of Channel Lining Concrete in Construction
- Study on the Cyclic Loading Effects to the Railway Ballast
- Laboratory Studies of the Mechanical Properties of Bolt Thread Connection
- Analysis of Influence of Slab’s Reinforcement on Seismic Bearing Capacity of Beam’s Cross-Section in Cast-In Situ Frame Structure
- Experimental Study on Seismic Performance of CFRP Strengthened RC Frames Damaged by Earthquake
- Study on the Effect of Grid Beam on Seismic Performance of Improved Multi-Ribbed Slab Structure
Les mer
Produktdetaljer
ISBN
9783037857410
Publisert
2013-09-18
Utgiver
Trans Tech Publications Ltd
Vekt
3370 gr
Høyde
240 mm
Bredde
170 mm
Dybde
92 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1840