/

New Perspectives on Applied Industrial Ergonomics

RealyvĂĄsquez Vargas, Arturo GarcĂ­a-Alcaraz, Jorge Luis Z-Flores, Emigdio
Innbundet / 2021 / Engelsk

Produktdetaljer

ISBN
9783030734671
Publisert
2021-06-16
Utgiver
Springer Nature Switzerland AG
Høyde
235 mm
Bredde
155 mm
AldersnivĂĽ
Professional/practitioner, P, 06
SprĂĽk
Product language
Engelsk
Format
Product format
Innbundet

Redaktør
RealyvĂĄsquez Vargas, Arturo
GarcĂ­a-Alcaraz, Jorge Luis
Z-Flores, Emigdio

Biografisk notat

Arturo Realyvásquez Vargas is a full-time professor from the Department of Industrial Engineering at Tecnológico Nacional de Mexico/Instituto Tecnológico de Tijuana in Mexico. He received a master’s degree in Industrial Engineering and a Ph.D. in Engineering Sciences from the Autonomous University of Ciudad Juarez in Mexico. Currently, he is studying a Ph.D. in Innovation in Product Engineering and Industrial Process at the University of La Rioja (Spain). In addition, his main research areas are related to the optimization of industrial processes, lean manufacturing, and ergonomics. He is an active member of the Society of Ergonomists of Mexico Civil Association (Sociedad de Ergonomistas de México, SEMAC) and the Network of Optimization of Industrial Processes (Red de Optimización de Procesos Industriales, ROPRIN). Currently, Dr. Realyvásquez is National Researcher recognized by the National Council of Science & Technology of Mexico (CONACYT) as Candidate. Furthermore, Dr. Realyvásquezis an author/coauthor in around 12 papers published in journals indexed in the Journal Citation Reports, and he has attended two international conferences and congress in Mexico as well as in the United States of America.

Nowadays, Dr. RealyvĂĄsquez has supervised more than 20 bachelor theses and 5 master theses. In addition, Dr. RealyvĂĄsquez is the author of one book published by the international publisher Springer, related to ergonomics. Also, Dr. RealyvĂĄsquez has edited two books in IGI Global, all of them related to ergonomics. ORCID: https://orcid.org/0000-0003-2825- 2595, Scopus Author ID: 56167726800.

Jorge Luis García Alcaraz is a full-time researcher from the Department of Industrial Engineering at the Autonomous University of Ciudad Juarez in Mexico. He received an M.Sc. in Industrial Engineering from the Colima Technological Institute (Mexico), a Ph.D. in Industrial Engineering from Ciudad Juårez Technological Institute (Mexico), a Ph.D. in Innovation in Product Engineering and Industrial Process from University of La Rioja (Spain), a Ph.D. in Sciences and Industrial Technologies from the Public University of Navarre (Spain), and a Postdoc in Manufacturing Process from University of La Rioja (Spain). In addition, his main research areas are related to the multicriteria decision-making process and techniques applied to lean manufacturing, production process, and supply chain modeling. He is a founding member of the Mexican Society of Operation Research and an active member in the Mexican Academy of Industrial Engineering.  Currently, Dr. García is National Researcher recognized by the National Council of Science & Technology of Mexico (CONACYT) as Level II. Also, Dr. García is an author/coauthor in around 86 papers published in journals indexed in the Journal Citation Reports, and he has attended to more than 150 international conferences and congress around the world.

Moreover, Dr. GarcĂ­a has supervised more than 50 bachelor theses, 18 master theses, and 13 doctoral theses. He has 13 international patents and 1 industrial design in Mexico and Spain. Also, Dr. GarcĂ­a is the author of several books published by international publishers as Springer and IGI Global, all of them related to lean manufacturing, its tools, and techniques, kaizen, supply chain, and just-in-time philosophies. Finally, Dr. GarcĂ­a was the winner of the Chihuahua State Science and Technology Award in 2015, and nowadays, he is a member of several doctoral committees in universities from Mexico, Colombia, and Spain. ORCID: hhtp://orcid.org/0000-0002-7092-6963, Scopus Author ID: 55616966800. Web of Science ResearcherID: N-9124-2013

Emigdio Z. Flores López is a full-time professor and researcher in the Industrial Engineering department at Instituto Tecnológico de Tijuana. He received his doctorate in Science Engineering at Instituto Tecnológico de Tijuana in 2017, focusing in theoretical state-of-the-art techniques for numerical optimization as well as applications using these methods. In addition, he received his master’s degree in 2005 in Digital Systems from the Instituto Politecnico Nacional. Also, he has worked as a senior design engineer for almost 8 years in Sony Corporation, successfully completing several projects, having a wide experience in different field areas, such as product design and manufacturing to shipping.

Currently, he is a member of the postgraduate program of Industrial Engineering at Instituto TecnolĂłgico de Tijuana, supervising 3 master theses. Finally, he is also a member of the National Researchers System; he holds 9 international publications and 1 USA patent. ORCID: https://orcid.org/0000-0002-1442-5320

New Perspectives on Applied Industrial Ergonomics

RealyvĂĄsquez Vargas, Arturo GarcĂ­a-Alcaraz, Jorge Luis Z-Flores, Emigdio
Innbundet / 2021 / Engelsk
RealyvĂĄsquez Vargas, Arturo GarcĂ­a-Alcaraz, Jorge Luis Z-Flores, Emigdio
Innbundet / 2021 / Engelsk
Nettpris:
2.075,-
Laveste pris siste 30 dager: 2.075,-
Ikke i salg
Klikk og hent

This book reports the most recent, advanced, successful, and real applications of ergonomics in order to improve the human well-being and performance in a short term, as well as the organizational performance in a long term. The book is organized as follows:

Physical Ergonomics. This section reports case studies where physical risk factors are presented in the workplace, such as physical risk factors including uncomfortable body postures, repetitive movements, force application, manual material handling, and physical environmental conditions. In addition, case studies must report applications from physical ergonomics methods, for instance, RULA, REBA, OWAS, NIOSH, JSI, Suzane Rodgers, ERIN, among others.

Cognitive Ergonomics. This section reports the implementation of ergonomic tools, techniques, and methods in real case studies. These applications are aimed to know, decrease, and control cognitive and psychological risk factors, such as mental workload, informationprocessing, situation awareness, human error identification, and interface analysis. These applications may include the following methods NASA-TLX, SWAT, CWA, SHERPA, HET, TAFEI, SAGAT, SART, SACRI, QUIS, SUMI, to mention a few of them.

Macro-ergonomics. This section is focused on the analysis, design, and evaluation of work systems. It reports case studies where risk factors are beyond a specific workstation. These risk factors may include supervision styles, teamwork management, task variety, social relationships, organizational culture, organizational communication, technology, work schedules, and motivation, among others. In addition, case studies report the application of macro-ergonomic methods, such as MOQS, focus group, participatory ergonomics, HITOP, MAS, and MEAD, among others.

Les mer
This section reports case studies where physical risk factors are presented in the workplace, such as physical risk factors including uncomfortable body postures, repetitive movements, force application, manual material handling, and physical environmental conditions.
Les mer
1. Two Groups of Patented Devices for Carpal Tunnel Syndrome Re-habilitation. Comparative Study Between Traditional and Additive Manufacturing.- 2. A Review on Infrared Thermal Imaging as a Tool in Carpal Tun-nel Syndrome.- 3. Mental Workload Management and Evaluation: A Literature Re-view for Sustainable Processes and Organizations.- 4. Ergonomic Control Panel (ECP): A Proposed Comprehensive Er-gonomics Evaluation Tool Using Multi-Task Evaluation Models.- 5. Fatigue Study among 12-Hour and 7-Hour Night Shift Workers in the Manufacturing Industry.- 6. Different Conceptions of Burnout and Its Relationships with Job Strain and Emotional Intelligence.- 7. Ergonomics Implementation in Manufac-turing Industries: Man-agement Commit-ment for Financial Benefits.- 8. Applying Hierarchical Task Analysis (HTA) to Identify Ergonom-ic Risks in Exhibition Booths Set-Up Process.- 9. Ergonomic Evaluation of Localized Manufacturing Concerns for Agricultural Appliances in Odisha (India).- 10. Minimization of Ergonomic Risk in Autovend. Case Study: Bread Company

Les mer
This book reports the most recent, advanced, successful, and real applications of ergonomics in order to improve the human well-being and performance in a short term, as well as the organizational performance in a long term. The book is organized as follows:

Physical Ergonomics. This section reports case studies where physical risk factors are presented in the workplace, such as physical risk factors including uncomfortable body postures, repetitive movements, force application, manual material handling, and physical environmental conditions. In addition, case studies must report applications from physical ergonomics methods, for instance, RULA, REBA, OWAS, NIOSH, JSI, Suzane Rodgers, ERIN, among others.

Cognitive Ergonomics. This section reports the implementation of ergonomic tools, techniques, and methods in real case studies. These applications are aimed to know, decrease, and control cognitive and psychological risk factors, such as mental workload, information processing, situation awareness, human error identification, and interface analysis. These applications may include the following methods NASA-TLX, SWAT, CWA, SHERPA, HET, TAFEI, SAGAT, SART, SACRI, QUIS, SUMI, to mention a few of them.

Macro-ergonomics. This section is focused on the analysis, design, and evaluation of work systems. It reports case studies where risk factors are beyond a specific workstation. These risk factors may include supervision styles, teamwork management, task variety, social relationships, organizational culture, organizational communication, technology, work schedules, and motivation, among others. In addition, case studies report the application of macro-ergonomic methods, such as MOQS, focus group, participatory ergonomics, HITOP, MAS, and MEAD, among others.

Les mer
Describes how current ergonomic tools, techniques, and methods in industrial processes are being integrated, modified, and combined to solve real problems Collects successful and real case studies using ergonomics techniques and methods in production systems Addresses the applications of industrial ergonomics from the acquisition of human capital to the transformation of raw materials into products Integrates real techniques, tools, and methods that are being applied in industrial processes Explains the main ergonomic tools, methods, and techniques that are currently used in the industrial production processes and services Describes a collection of the best ergonomic practices applied by manufacturing or service managers to identify and solve problems in the real world
Les mer
GPSR Compliance The European Union's (EU) General Product Safety Regulation (GPSR) is a set of rules that requires consumer products to be safe and our obligations to ensure this. If you have any concerns about our products you can contact us on ProductSafety@springernature.com. In case Publisher is established outside the EU, the EU authorized representative is: Springer Nature Customer Service Center GmbH Europaplatz 3 69115 Heidelberg, Germany ProductSafety@springernature.com
Les mer

Relaterte produkter

This book reports the most recent, advanced, successful, and real applications of ergonomics in order to improve the human well-being and performance in a short term, as well as the organizational performance in a long term. The book is organized as follows:

Physical Ergonomics. This section reports case studies where physical risk factors are presented in the workplace, such as physical risk factors including uncomfortable body postures, repetitive movements, force application, manual material handling, and physical environmental conditions. In addition, case studies must report applications from physical ergonomics methods, for instance, RULA, REBA, OWAS, NIOSH, JSI, Suzane Rodgers, ERIN, among others.

Cognitive Ergonomics. This section reports the implementation of ergonomic tools, techniques, and methods in real case studies. These applications are aimed to know, decrease, and control cognitive and psychological risk factors, such as mental workload, informationprocessing, situation awareness, human error identification, and interface analysis. These applications may include the following methods NASA-TLX, SWAT, CWA, SHERPA, HET, TAFEI, SAGAT, SART, SACRI, QUIS, SUMI, to mention a few of them.

Macro-ergonomics. This section is focused on the analysis, design, and evaluation of work systems. It reports case studies where risk factors are beyond a specific workstation. These risk factors may include supervision styles, teamwork management, task variety, social relationships, organizational culture, organizational communication, technology, work schedules, and motivation, among others. In addition, case studies report the application of macro-ergonomic methods, such as MOQS, focus group, participatory ergonomics, HITOP, MAS, and MEAD, among others.

Les mer
This section reports case studies where physical risk factors are presented in the workplace, such as physical risk factors including uncomfortable body postures, repetitive movements, force application, manual material handling, and physical environmental conditions.
Les mer
1. Two Groups of Patented Devices for Carpal Tunnel Syndrome Re-habilitation. Comparative Study Between Traditional and Additive Manufacturing.- 2. A Review on Infrared Thermal Imaging as a Tool in Carpal Tun-nel Syndrome.- 3. Mental Workload Management and Evaluation: A Literature Re-view for Sustainable Processes and Organizations.- 4. Ergonomic Control Panel (ECP): A Proposed Comprehensive Er-gonomics Evaluation Tool Using Multi-Task Evaluation Models.- 5. Fatigue Study among 12-Hour and 7-Hour Night Shift Workers in the Manufacturing Industry.- 6. Different Conceptions of Burnout and Its Relationships with Job Strain and Emotional Intelligence.- 7. Ergonomics Implementation in Manufac-turing Industries: Man-agement Commit-ment for Financial Benefits.- 8. Applying Hierarchical Task Analysis (HTA) to Identify Ergonom-ic Risks in Exhibition Booths Set-Up Process.- 9. Ergonomic Evaluation of Localized Manufacturing Concerns for Agricultural Appliances in Odisha (India).- 10. Minimization of Ergonomic Risk in Autovend. Case Study: Bread Company

Les mer
This book reports the most recent, advanced, successful, and real applications of ergonomics in order to improve the human well-being and performance in a short term, as well as the organizational performance in a long term. The book is organized as follows:

Physical Ergonomics. This section reports case studies where physical risk factors are presented in the workplace, such as physical risk factors including uncomfortable body postures, repetitive movements, force application, manual material handling, and physical environmental conditions. In addition, case studies must report applications from physical ergonomics methods, for instance, RULA, REBA, OWAS, NIOSH, JSI, Suzane Rodgers, ERIN, among others.

Cognitive Ergonomics. This section reports the implementation of ergonomic tools, techniques, and methods in real case studies. These applications are aimed to know, decrease, and control cognitive and psychological risk factors, such as mental workload, information processing, situation awareness, human error identification, and interface analysis. These applications may include the following methods NASA-TLX, SWAT, CWA, SHERPA, HET, TAFEI, SAGAT, SART, SACRI, QUIS, SUMI, to mention a few of them.

Macro-ergonomics. This section is focused on the analysis, design, and evaluation of work systems. It reports case studies where risk factors are beyond a specific workstation. These risk factors may include supervision styles, teamwork management, task variety, social relationships, organizational culture, organizational communication, technology, work schedules, and motivation, among others. In addition, case studies report the application of macro-ergonomic methods, such as MOQS, focus group, participatory ergonomics, HITOP, MAS, and MEAD, among others.

Les mer
Describes how current ergonomic tools, techniques, and methods in industrial processes are being integrated, modified, and combined to solve real problems Collects successful and real case studies using ergonomics techniques and methods in production systems Addresses the applications of industrial ergonomics from the acquisition of human capital to the transformation of raw materials into products Integrates real techniques, tools, and methods that are being applied in industrial processes Explains the main ergonomic tools, methods, and techniques that are currently used in the industrial production processes and services Describes a collection of the best ergonomic practices applied by manufacturing or service managers to identify and solve problems in the real world
Les mer
GPSR Compliance The European Union's (EU) General Product Safety Regulation (GPSR) is a set of rules that requires consumer products to be safe and our obligations to ensure this. If you have any concerns about our products you can contact us on ProductSafety@springernature.com. In case Publisher is established outside the EU, the EU authorized representative is: Springer Nature Customer Service Center GmbH Europaplatz 3 69115 Heidelberg, Germany ProductSafety@springernature.com
Les mer

Produktdetaljer

ISBN
9783030734671
Publisert
2021-06-16
Utgiver
Springer Nature Switzerland AG
Høyde
235 mm
Bredde
155 mm
AldersnivĂĽ
Professional/practitioner, P, 06
SprĂĽk
Product language
Engelsk
Format
Product format
Innbundet

Redaktør
RealyvĂĄsquez Vargas, Arturo
GarcĂ­a-Alcaraz, Jorge Luis
Z-Flores, Emigdio

Biografisk notat

Arturo Realyvásquez Vargas is a full-time professor from the Department of Industrial Engineering at Tecnológico Nacional de Mexico/Instituto Tecnológico de Tijuana in Mexico. He received a master’s degree in Industrial Engineering and a Ph.D. in Engineering Sciences from the Autonomous University of Ciudad Juarez in Mexico. Currently, he is studying a Ph.D. in Innovation in Product Engineering and Industrial Process at the University of La Rioja (Spain). In addition, his main research areas are related to the optimization of industrial processes, lean manufacturing, and ergonomics. He is an active member of the Society of Ergonomists of Mexico Civil Association (Sociedad de Ergonomistas de México, SEMAC) and the Network of Optimization of Industrial Processes (Red de Optimización de Procesos Industriales, ROPRIN). Currently, Dr. Realyvásquez is National Researcher recognized by the National Council of Science & Technology of Mexico (CONACYT) as Candidate. Furthermore, Dr. Realyvásquezis an author/coauthor in around 12 papers published in journals indexed in the Journal Citation Reports, and he has attended two international conferences and congress in Mexico as well as in the United States of America.

Nowadays, Dr. RealyvĂĄsquez has supervised more than 20 bachelor theses and 5 master theses. In addition, Dr. RealyvĂĄsquez is the author of one book published by the international publisher Springer, related to ergonomics. Also, Dr. RealyvĂĄsquez has edited two books in IGI Global, all of them related to ergonomics. ORCID: https://orcid.org/0000-0003-2825- 2595, Scopus Author ID: 56167726800.

Jorge Luis García Alcaraz is a full-time researcher from the Department of Industrial Engineering at the Autonomous University of Ciudad Juarez in Mexico. He received an M.Sc. in Industrial Engineering from the Colima Technological Institute (Mexico), a Ph.D. in Industrial Engineering from Ciudad Juårez Technological Institute (Mexico), a Ph.D. in Innovation in Product Engineering and Industrial Process from University of La Rioja (Spain), a Ph.D. in Sciences and Industrial Technologies from the Public University of Navarre (Spain), and a Postdoc in Manufacturing Process from University of La Rioja (Spain). In addition, his main research areas are related to the multicriteria decision-making process and techniques applied to lean manufacturing, production process, and supply chain modeling. He is a founding member of the Mexican Society of Operation Research and an active member in the Mexican Academy of Industrial Engineering.  Currently, Dr. García is National Researcher recognized by the National Council of Science & Technology of Mexico (CONACYT) as Level II. Also, Dr. García is an author/coauthor in around 86 papers published in journals indexed in the Journal Citation Reports, and he has attended to more than 150 international conferences and congress around the world.

Moreover, Dr. GarcĂ­a has supervised more than 50 bachelor theses, 18 master theses, and 13 doctoral theses. He has 13 international patents and 1 industrial design in Mexico and Spain. Also, Dr. GarcĂ­a is the author of several books published by international publishers as Springer and IGI Global, all of them related to lean manufacturing, its tools, and techniques, kaizen, supply chain, and just-in-time philosophies. Finally, Dr. GarcĂ­a was the winner of the Chihuahua State Science and Technology Award in 2015, and nowadays, he is a member of several doctoral committees in universities from Mexico, Colombia, and Spain. ORCID: hhtp://orcid.org/0000-0002-7092-6963, Scopus Author ID: 55616966800. Web of Science ResearcherID: N-9124-2013

Emigdio Z. Flores López is a full-time professor and researcher in the Industrial Engineering department at Instituto Tecnológico de Tijuana. He received his doctorate in Science Engineering at Instituto Tecnológico de Tijuana in 2017, focusing in theoretical state-of-the-art techniques for numerical optimization as well as applications using these methods. In addition, he received his master’s degree in 2005 in Digital Systems from the Instituto Politecnico Nacional. Also, he has worked as a senior design engineer for almost 8 years in Sony Corporation, successfully completing several projects, having a wide experience in different field areas, such as product design and manufacturing to shipping.

Currently, he is a member of the postgraduate program of Industrial Engineering at Instituto TecnolĂłgico de Tijuana, supervising 3 master theses. Finally, he is also a member of the National Researchers System; he holds 9 international publications and 1 USA patent. ORCID: https://orcid.org/0000-0002-1442-5320

Relaterte produkter