Supplement to THERMEC 2011, THERMEC 2011, International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, August 1-5, 2011, Quebec City, Canada

• Preface and Committees
• Chapter 1: Aerospace Structural Metallic Materials/Ti Alloys
• Consolidation of Ti Powder by a Compression Rotation Shearing System at Room Temperature - Effect of Pivot Rotation Speed on Consolidation
• Fatigue Crack Propagation Rates and Local Texture Relationship in 2099-T83 Al-Li Alloy
• Chapter 2: Aluminium Alloys
• Influence of Mixing Parameters on the Density and Compaction Behavior of Carbon Anodes Used in Aluminum Production
• Recovery Behaviour at the Inter-Alloy Region of a Cold Rolled Clad Aluminum Alloy
• Al-Li Alloy 2099-T83 Extrusions: Static Mechanical Properties, Microstructure and Texture
• Effect of Grain Refinement on Residual Strain and Hot Tearing in B206 Aluminum Alloy
• Microstructure Evolution in an Al-Cu-Mg-Ag Alloy during ECAP at 300°C
• Analysis on Behavior of Hydrogen in Ion-Plated Pure Aluminum
• The Ca-Rich Corner of the Al-Ca-Zn System
• Rheo-Extrusion of Hypereutectic Al-14.8Si-4.5Cu-1.1Mg Alloy
• Aging Behavior of Al-Mg-Ge Alloys with Different Mg₂Ge Contents
• The Crystal Structure of the β’-Phase Including Ag in Al-Mg-Si-Ag Alloy
• Investigation of the Substructure Evolution within Grains of Different Orientations during Recrystallization in a Commercial Al Alloy
• Microstructural Control of a Zn-Al Eutectoid Alloy by Hot-Rolling
• TEM Observation of Cu and Ag Addition Al-Mg-Si Alloys
• Behavior of Hydrogen in Electrolytically Charged Aluminum
• Variation of Aging Behaviour for TM-Addition Al-Mg-Si Alloys
• Behavior of Hydrogen Invasion in Aluminum Alloys from Different Environments
• Chapter 3: Biomaterials
• Silk Fibroin: A Promising Biomaterial
• Study of Cellular Adhesion by Means of Micropillar Surface Topologies
• The Role of Collagen Type I on Hematopoietic and Mesenchymal Stem Cells Expansion and Differentiation
• On the Interface between Plasma Fluorocarbon Films and 316L Stainless Steel Substrates for Advanced Coated Stents
• Monitoring Compliance and Elastic Modulus in a Bioreactor for Optimal Control of Vascular Tissue Growth
• Rheological Studies of an Injectable Radiopaque Hydrogel for Embolization of Abdominal Aortic Aneurysms
• Fabrication of Artificial Intervertebral Spacer by Functionally Graded Zirconia
• Fabrication and Characterization of Porous Implant Products with Aligned Pores by EBM Method for Biomedical Application
• Ultrasonic Setup for Testing Hydrogels: Preliminary Experiments on Collagen Gels
• The Effect of Dynamical Strain on the Maturation of Collagen-Based Cell-Containing Scaffolds for Vascular Tissue Engineering
• Why Mechanical Properties of Collagen Scaffolds Should Be Tested in a Pseudo-Physiological Environment?
• Polysaccharides Grafting on Fluorocarbon Films Deposited by Plasma on 316L Stainless Steel for Long Term Stable Stent
• Synthesis and Characterisation of New Superelastic and Low Elastic Modulus Ti-Nb-X Alloys for Biomedical Application
• Development of a Targeted Drug Delivery System: Monoclonal Antibodies Adsorption onto Bonelike Hydroxyapatite Nanocrystal Surface
• Thermal Treatment Effects on Biopolymer Multilayered Thin Films
• Improvement of Collagen Hydrogel Scaffolds Properties by the Addition of Konjac Glucomannan
• Chapter 4: Composites
• Investigating the Potential of TiB₂–Based Composites with Ti and Fe Additives as Wettable Cathode
• Microstructure and Superconductive Property of MgB₂/Al Composite Materials
• Microstructure of the New Route Wire Fabrication of V₃Ga Compound Superconducting Wire Using High Ga Content Cu-Ga/V Precursor Composite Material
• Fabrication of W-12wt%Cu Composites by Powder Metallurgy Method: Activated Sintering
• Fabrication and Reaction Mechanism of In Situ TiC and TiB₂ Reinforced Mg Matrix Composites
• Chapter 5: Energy Materials
• Microstructure Evolution in a P911 Steel under Creep Conditions
• Chapter 6: Fracture and Mechanical Behaviour
• Role of Delamination Fracture for Enhanced Impact Toughness in 0.05 %P Doped High Strength Steel with Ultrafine Elongated Grain Structure
• Effect of Die Temperature on Tensile Property of Rheocast Phosphor Bronze
• The Brittle-to-Ductile Transition Behaviour in Fe-Al Single Crystalline Alloys
• Study of Self-Compacting Fly Ash Concrete Using Silica Fume Admixture
• Chapter 7: Friction Stirr Processing
• Microstructure, Mechanical and Corrosion Behaviour of AN AA2024-T3 FSW Joint
• Improving Friction Stir Welding between Copper and 304L Stainless Steel
• Dissimilar Friction Stir Welding of 2014 to 6061 Aluminum Alloys
• Microstructure Characterization of Friction Stir Spot Welded TRIP Steel
• Microstructure Control and Mechanical Properties of 7075 Aluminum Alloy by Means of Multi-Pass Friction Stir Processing
• The Effects of Heat Treatment and Cold Working on the Microstructure of Aluminum Alloys Welded by Friction Stir Welding (FSW) Technique
• Investigation of Friction Stir Welding of Stainless Steel Using a Stop-Action-Technique
• Influence of Post Weld Heat Treatment on Microstructure and Mechanical Properties of Friction Stir-Welded 2014Al-T6 Alloy
• Chapter 8: Fuel Cells & Hydrogen Storage Technologies
• Catalytic Properties of TiNi Foils for Methanol Decomposition
• Chapter 9: Intermetallics
• Strengthening by Addition of Refractory Elements to Ni₃(Si,Ti) Intermetallic Alloys
• Ductilization of a Ni₃(Si,Ti) Intermetallic Alloy by Addition of Interstitial Type Elements
• Chapter 10: Magnesium Alloys
• Discontinuous and Continuous Precipitation during Aging in Mg-Al System Alloys
• HRTEM Observation of the Age Hardening Precipitates in Mg-Gd-Sc Alloys, with Different Gd Concentrations
• Microstructure Observation of AM60 Magnesium Alloy Solidified by Rapidly Quench
• The Development of Novel Textures in Rare Earth Element Containing Magnesium Alloys
• HRTEM Observation of Early Stage of Precipitation in Mg-Gd-Y Alloys
• Effect of Zn Content on Aging Behavior of Binary Mg-Zn Alloys
• Effect of Zn Contents on Microstructure in AZ-Series Magnesium Alloys
• Evolution of as-Cast Microstructure of Mg-Al Alloys with Solute Content and Cooling Rate
• Electrochemical Behavior of Mg-6mass%Al Alloy Corroded in Na₂SO₄ and NaCl Solutions
• Effect of Grain Size on Microstructure and Aging Behavior in AM60 Magnesium Alloy
• Effect of Al and Mn Contents on Microstructure in AM-Series Magnesium Alloys
• Crystallographic Orientation Relationship between Discontinuous Precipitates and the Matrix in AM-Series Alloys
• Morphological and Crystallographic Characterizations of the Ca-Mg-Zn Intermetallics Appearing in Ternary Diffusion Couples
• Chapter 11: Modelling & Simulation
• Effect of Dimensional Variation on Induction Process Parameters Using 2D Simulation
• Numerical Simulation of Solidification Behavior and Grain Structure for Multi-Crystalline Silicon Casting and its Experimental Verification
• Simulation of Phase Transformation by Analysis of First Derivative of Dilatation Using Avrami Equation during Continuous Cooling in Low Carbon Steels
• Influence of Microstructural Inhomogenities on Internal Stress and Strain Distributions during Creep
• The Influence of Alloying Elements on Grain Boundary and Bulk Cohesion in Aluminum Alloys: Ab Initio Study
• Effects of Minor Elements X(X=Mo, Ni, Ti) on Aympotic Behavior along Peak Top of the Major Elenet in Fe-Cr Type Alloys
• On the Onset of Dynamic Recrystallization in Steels
• Study of Micro Droplet Impingement Process of Molten Lead-Free Solder by Inkjet Printing Process
• Multi-Pass Simulation of Heavy Plate Rolling Including Intermediate Forced Cooling
• Effect of Mo and Ni on Phase Separation in Fe-Cr=Mo-Ni Quaternary Alloys
• Grain Boundary Embrittlement of Fe Induced by P Segregation: First-Principles Tensile Tests
• FE Simulation of Metal Orthogonal Cutting Processes Based on 3D Adaptive Remeshing Procedure
• Chapter 12: Nanostructured Materials
• Surface Modification and Functionalization of Oxide Nanoparticles for Superhydrophobic Applications
• Microstructural and Mechanical Characterization of Multilayered Iron Electrodeposits
• Temperature Changes during Deformation of Polycrystalline and Nanocrystalline Nickel
• Highly Sensitive Pure and Pd-Doped LaFeO₃ Nanocrystalline Perovskite-Based Sensor Prepared by High Energy Ball Milling
• Synthesis and Characterization of Organic-Inorganic Layered Perovskite Compounds Using Fullerene Derivatives
• Preparation of Nanostructured Superhydrophobic Copper and Aluminum Surfaces
• Synthesis and Characterization of Polythiophenes Having Phosphonate Ester Groups
• Direct Patterning by Inkjet Printing 3-Mercaptopropionic Capped Nano Silver Suspension
• Surface Modification of Al Components Using Spark Plasma Sintering
• Structure and Magnetic Properties of Mn-Zn Ferrite Synthesized by Glycine-Nitrate Auto-Combustion Process
• Corrosion Behaviour of Nanocrystalline Zn-Ni and Zn-Ni-Co Electrodeposits
• Crystallographic Features of the A-Type and CE-Type Antiferromagnetic States in the Simple-Perovskite Manganite System Sr_1-xNd_xMnO₃
• Fabrication of Organic-Inorganic Nano-Hybrid Materials Containing Oligothiophene Derivatives
• Disclosing the Mechanical Properties of Green Calcium-Silicate-Hydrates by Statistical Nanoindentation Techniques
• Strain Hardening in Polycrystalline and Nanocrystalline Nickel
• Presence of the Ferroelectric Monoclinic State in the Mixed Ferroelectric System Ba(Ti_1-xZr_x)O₃
• Thermal Conductivity and Electrical Resistivity in Polycrystalline and Nanocrystalline Nickel
• Chapter 13: Neutron Scattering & X-Rays Studies of Advanced Materials
• Neutron Diffraction Investigations of a CuAlBe Shape Memory Alloy
• Evaluation of Residual Stress in SPR Joint by Neutron Diffraction
• Identification of Iron Rusts on Rail by X-Ray Diffraction and Vibrational Analysis
• HRTEM Observation of Alpha-Phase in Al Added 60/40 Cu-Zn Alloy
• Nondestructive Structure Test of Cam-Shaft Using both Eddy Current and X-Rays
• Chapter 14: Severe Plastic Deformation
• Simulation of Grain Growth of Materials Produced by Severe Plastic Deformation
• Influence of HPT or Rolling on Age-Hardening in Al-Mg-Si Alloys
• Submicrocrystalline Structures and Tensile Behaviour of Stainless Steels Subjected to Large Strain Deformation and Subsequent Annealing
• Chapter 15: Smart/Intelligent Materials & Processes
• Functional Properties of Nanostructured Ti-Ni SMA Produced by a Combination of Cold, Warm Rolling and Annealing
• Debonding Characterization of SMA/Polymer Morphing Structures
• Design of Active Bias Sma Actuators for Morphing Wing Applications
• Characterization of Piezo Fiber-Based Sensors Responses in Multifunctional Composites
• Cold Workability, Mechanical Properties, Pseoudoelastic and Shape Memory Response of Silver Added Ti-5Cr Alloys
• Martensite Variant Reorientation of NiMnGa/Silicone Composites Containing Polystyrene Foam Particles
• Chapter 16: Steels
• Influence of the Hot Rolling Process on the Mechanical Behaviour of Martensitic Steel
• Very Hard Synchrotron X-Ray Radiation as an Advanced Characterization Method Applied to Advanced High-Strength Steels
• Deformation Induced Pearlite Transformation and Spheroidization: Effect of Alloying Additions
• Microstructure and Deformation Behavior of a Hot Forged 9%Cr Creep Resistant Steel
• Effect of Microstructure on Formation of Ductile Fracture Surface in Steel Plate
• Microstructure Characterization of White Layer Formed by Hard Turning and Wire Electric Discharge Machining in High Carbon Steel (AISI 52100)
• Precipitation of Si and its Influence on Mechanical Properties of Type 441 Stainless Steel
• Effects of Hot-Forging Process on Combination of Strength and Toughness in Ultra High-Strength TRIP-Aided Martensitic Steels
• Carbon Distribution and the Influence on the Tempering Behaviour in a Hot-Work Tool Steel Aisi H11
• Systematic Approach to Clarify the Mechanism of Dynamic Transformation in Fe-6Ni-0.1C Alloy
• ’Quenching and Partitioning’ - An In Situ Approach to Characterize the Process Kinetics and the Final Microstructure of TRIP-Assisted Steel
• Evolution of Microstructure and Mechanical Properties during Annealing of Cold Rolled Fe-24Mn-3Al-2Si-1Ni-0.06C Twip Steel
• Topological Analysis of Martensite Morphology in Dual-Phase Steels
• Structural Changes in a 304-Type Austenitic Stainless Steel Processed by Multiple Hot Rolling
• Bubble Structures, Fishscaling Resistance and Adhesion of Vitreous Enamel to Low Carbon Steel
• Investigation on Properties of Bentonite Type in Cold Bonded Pelletization of Flue Dust
• Chapter 17: Superalloys
• INCONEL 718 Recrystallization in the Delta Supersolvus Domain
• Microstructural Evolution of Compacted Graphite Iron under Thermo-Mechanical Fatigue Conditions
• Interparticle Liquid Film Formation during Spark Plasma Sintering of Inconel 718 Superalloy
• Effect of Electric Field Treatment on Vacancy of Inconel 718 Superalloy at 1073 K
• Chatper 18: Surface Engineering/Coatings
• Micropatterning Polymer Materials to Improve Endothelialization
• Superhydrophobic Surface Elaboration Using Plasma Polymerization of Hexamethyldisiloxane (HMDSO)
• Effect of Different Aluminium Surface Treatments on Ice Adhesion Strength
• Preparation of Photocatalytic TiO₂ Filter by Chemical Surface Treatment from Ti Non-Woven Fabric
• Characterization of Microwave Plasma for Polymer Surface Modification Using FTIR Emission Spectroscopy
• Formation of Fe-Al Intermetallic Compound Film on Carbon Steel by Shot Peening and Heat Treatment
• Tribological Characterization of Electroless Nickel-Boron Coatings
• Biology Inspired Superhydrophobic Surfaces
• Oxidation Resistance of Al-Rich Aluminide Coating on TiAl Based Alloy by Thermal Spray and Diffusion Treatment
• Chapter 19: Thermomechanical Processing: Steels
• Formation of Deformation-Induced Divorced Eutectoid Pearlite above the Ae₁
• Thermomechanical Processing of a Nb-Microalloyed Steel in a Controlled-Forging Treatment
• Chapter 20: Welding & Joining
• Solid Freeform Fabrication of Al-Li 2199 via Controlled-Short-Circuit-MIG Welding
• Degradation Mechanism of Tungsten Electrode for Fusing Joining
• Friction Stir Welding of Al-Li AA2199: Parameters, Precipitates and Post Weld Heat Treatment
• Determination of Global and Local Tensile Behaviours of Laser Welded Ti-6Al-4V Alloy
• Brazing of Cemented Carbides at Lower Temperatures
• Studies on Shielded Active Gas Forge Welded API 5CT L80 Material at Different Cooling Rates
• Assessment of Mechanical Parameters of PMMA Used in Human Body
• Microstructure Investigation of Aluminide Coatings after Platinum Modification Deposited by CVD Method on Inconel 713 LC Ni-Base Superalloy