This issue from the topic series “Corrosion” contains articles published by Trans Tech Publications in the 2017 - 2018 years. The volume “Corrosion. Protection of Structural Metals and Alloys (2017-2018)” presents readers with a wide range of research results and engineering solutions in providing the anti-corrosion protection of structural metals, alloys, and engineering objects. We hope this collection will be useful and interesting to a broad audience of researchers and engineers from various modern manufacturing areas.

Les mer

Aggregated Book

  • Preface
  • Chapter 1: Metal-Based Coatings
  • Corrosion Behaviors for Galvanizing, Galvalume and Chromate Treated Steels in 1% NaOH Solution
  • Influence of the pH and Stirring Speed of the Electrodeposition Bath in the Performance of Zinc and Zinc-Nanocomposite Coatings
  • The Effect of Current Densities in Zinc Electroplating Process on Mild Steel for Soil Water Environment Application
  • Effect of Doping of Nanoparticles on the Properties of Zn-Ni Composite Coatings
  • Structure and Performances of 7075 Aluminum Alloy Surface Subject to Hot-Dip Zinc
  • Characterization of Ni-P and Ni-P-Al2O3 Heat Treated Layers
  • Effect of Heat Treatment of AZ91 Magnesium Alloy on the Electroless Ni-P Deposition
  • Factors Affecting on the Corrosion Resistance of Electroless Ni-Zn-P Coated Steel
  • Fabrication of Superhydrophobic Ni-SiO2 Nanocomposite Coating with Excellent Corrosion Resistance on Mild Steel
  • New Composite Materials Based on Intermetallics for Protection Details of Hydropower Equipment from Cavitation, Hydroabrasive and Corrosion Wear
  • Influence of Composite Nano-Coating of Ni-Co-SiC Obtained by Electrodeposition on the Corrosion Resistance of API 5L X80 Steel
  • Corrosion Behavior of As-Plated and Annealed Cr-C-Deposited Steels
  • Metal Matrix Composites as Environment-Friendly Protective Coatings
  • Electrodeposition and Corrosion Resistance of Cu/Zn/Cu Multilayer Coatings
  • Study on Corrosion Process of Al-Mg Coatings Based on Electrochemical Impedance Spectroscopy
  • Chapter 2: Inorganic Coatings and Pretreatments
  • Characterization and Structure Analysis of the Anodic Film Formed on AZ31 Mg Alloy in KOH Alkaline Solution with Various Additives
  • Surface Morphology and Phase Transitions of Anodic TiO2 Films Induced by Hydrothermal Exposure
  • Effect of Surface Strengthening on Corrosion Property of Ti-6Al-4V in 3.5% NaCl
  • Investigation in the Influence of Surface Treatment on Mechanical and Electrochemical Corrosion Properties of Ti-6Al-4V Alloy
  • The Effect of Potential on Surface Characteristic and Corrosion Resistance of Commercial Pure Titanium Processed by Anodic Oxidation Treatment
  • Effect of Current Density on the Microstructure and Corrosion Properties of MAO Coatings on Aluminum Alloy Shock Absorber
  • Superhydrophobic and Corrosion Protective Coating on Aluminium
  • Optimization of MAO Process Parameters and Effect of Subsequent Sealing Treatment on Corrosion Resistance of Aluminum Alloy
  • Effect of Frequency and Duty Cycle on Growth, Structure and Corrosion Resistance of Micro Arc Oxidation Coating on RZ5 Magnesium Alloy
  • Incorporation of Composite Zirconia-Silica Nanoparticles into PEO-Coatings on Magnesium Alloys
  • Protective Coatings Formed by PEO and Fluorine-Containing Compound
  • Efficient Micro-Arc Oxidation Technology for As-Cast AZ80 Magnesium Alloy
  • Graphene Oxide Coatings Deposited on Steel Substrate Using Electrophoretic Deposition and Electrochemical Evaluation of Coatings in Saline Media
  • Effects of Al2O3 Additive on Manganese Phosphate Conversion Coating of Carbon Steel
  • Permanganate - Based Hybrid Nano-Conversion Coating on Aluminium
  • Study of Microstructure and Corrosion Resistance of Zinc Electrodeposits before and after Black Chromating
  • Ceria Coatings Prepared by Sol-Gel Approach on AZ91 Magnesium Alloy
  • Enhanced Corrosion Resistance of SiCp/ 2009 Al by Cerium and Lanthanum Conversion Treatment
  • Entrapment of Hard Particles into Cr(VI)-Free Conversion Layers of Electrodeposited Zinc Coatings to Improve Corrosion Resistance
  • Effect of the Bluing Solution on Corrosion Resistance of the Oxide Film Prepared in Steel
  • Metallic-Ceramic Combination of HVOF Deposited Layers for Corrosion Protection Applications
  • Morphology, Structure and Corrosion Resistance of Nano-Enamel Coating Changed on Ti-6Al-4V Alloy
  • Electrochemical Behaviour of TiCN and TiAlN Gradient Coatings Prepared by Lateral Rotating Cathode Arc PVD Technology
  • Effect of CH4 Content on the Characteristics of Surface Layers of Low Temperature Plasma Nitrided 2205 Duplex Stainless Steel
  • Effect of Gas Content and Treatment Temperature on the Characteristic of Surface Layers of Low Temperature Plasma Nitrided 316L Austenitic Stainless Steel
  • Stress Gradient Determination in Anti-Corrosion Multilayer Coating
  • Improvement of the Surface Properties of Low Temperature Plasma Nitrocarburized Martensitic Precipitation-Hardening Stainless Steel by Aging Treatment
  • Chapter 3: Organic Coatings and Surface Treatments
  • Effect of Osmotic Pressure by Salt Concentration on Corrosion Resistance of Anti-Corrosive Paint
  • Deterioration Behaviors of Overlapping Layers between Al-5Mg Alloy Thermal Spray Coating and Heavy-Duty Paint Coating
  • Metallographic Analysis of Filiform Corrosion
  • A Comparative Study on the Wear and Corrosion Resistance of Coatings
  • ZnO Nanoparticles for Anti-Corrosion Nanocoating of Carbon Steel
  • Corrosion, Wettability, and Adhesion of Acrylic Coatings Containing Silane-Treated Mineral Fillers on Carbon Steel
  • Influence of GPTMS Precursor Concentration as Pretreatment of Galvanized Steel
  • Bio-Inspired In Situ Fabrication of 11-Mercaptoundecanoic Acid Coating on Stainless Steel 304 for Corrosion Protection
  • Behavior of Polypyrrole Film Chemically Polymerized with Lauric Acid on Copper Surface
  • Preparation and Characterization of an Emulsion Paint Based on Arghel Extract as an Eco-Friendly Corrosion Inhibitor
  • Optimization of Corrosive Properties of Carbon Fiber Reinforced Aluminum Laminates due to Integration of an Elastomer Interlayer
  • Chapter 4: Coatings for High Temperatures
  • Corrosion Behaviour of HVOF Sprayed Coatings on ASME SA213 T22 Boiler Steel in an Actual Boiler Environment
  • Mechanical Properties of HVOF Sprayed CrC-NiCr Coating Exposed to Hot Corrosion Environment
  • Degradation of HVOF Sprayed Hastelloy C-276 Local Mechanical Properties after Exposure to High Temperature Corrosion
  • High-Temperature Corrosion of Aluminized Diffusion-Coating for Fe-Base Alloy in N2/H2O/H2S-Mixed Gas
  • Improving the Corrosion Resistance of Hot-Working Mold Steel against Al Alloy Melt by Coating
  • Stress Evolution and Element Diffusion in Bi-Layered Yb2SiO5/ Mullite Environmental Barrier Coatings under High-Temperature Molten Salt Corrosion
  • Chapter 5: Corrosion Inhibitors
  • Adsorption Isotherm and SEM Investigating of Cucurbit[n]Urils Based Corrosion Inhibitors with Gossypol for Mild Steel in Alkaline Media Containing Chloride Ions
  • Polarization Resistance Parameters of Anti-Corrosion Inhibitor of Cucurbit[N]Urils and Thioglycolurils in Aggressive Mediums
  • Corrosion Inhibition on Mild Steel Using PFOA Additives
  • Rhizophora apic ulata Extract as Corrosion Inhibitor in 3.5% NaCl for API 5L Steel
  • Some Anionic Surfactants as Corrosion Inhibitors for Carbon Steel in Hydrochloric Acid Solution
  • Corrosion Inhibition by a Caesalpinia Sappan L Modified Imidazoline for Carbon Steel API 5L Grade X60 in HCl 1M Environment
  • Neem Leaf Extract as a Corrosion Inhibitor on Mild Steel in Acidic Solution
  • Revealing the Inhibition Efficiencies of Artesunate and Rutin for Corrosion of Steel: A Theoretical Study
  • Understanding the Inhibition Mechanism of a Supramolecular Complex as the Corrosion Inhibitor for Mild Steel in the Condensate Water
  • Novel Methodology for the Selection, Dosing and On-Line Control of Corrosion Inhibitors for Industrial Acid Pickling
  • Modern Packaging Materials for Steel Products
  • Accelerated Tests of Protective Properties of Packaging Materials for Cold-Rolled Steel
  • Ceftriaxone as Corrosion Inhibitor for Nickel in Acid Solutions
  • Corrosion Inhibition of 6063 Aluminum Alloy in 0.5 M Sodium Hydroxide Medium by Aqueous Extract of Seeds of Garciniaindica
  • Evaluation of the Inhibition Efficiency of a Green Inhibitor on Corrosion of Cu-Ni Alloys in the Marine Application
  • Chapter 6: Cathodic Protection
  • Influence of Ti on the Electrochemical Behavior of Al-Zn-In-Si Sacrificial Anodes
  • Corrosion Behavior of Al-Zn-In Sacrificial Anode Alloys Produced by Conventional Casting and Semi-Solid Metal Casting Processes
  • A Study on Galvanic Current Variation of Zn Sacrificial Anode Made by Including of Additive in Solutions with Various Conductivities
Les mer

Produktdetaljer

ISBN
9783035715262
Publisert
2021-05-27
Utgiver
Trans Tech Publications Ltd
Vekt
1100 gr
Høyde
240 mm
Bredde
170 mm
Dybde
29 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
578