Advanced Design and Manufacturing Technology IV
Heftet /
2014
/ Engelsk
Produktdetaljer
ISBN
9783038352570
Publisert
2014-11-05
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
4000 gr
Høyde
240 mm
Bredde
170 mm
Dybde
106 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
2112
Collection of selected, peer reviewed papers from the 4th International Conference on Advanced Design and Manufacturing Engineering (ADME 2014), July 26-27, 2014, Hangzhou, China.
The 423 papers are grouped as follows:
Chapter 1: Applied Engineering in Area of Heat, Fluid, Acoustic, Flow and Fields,
Chapter 2: Design and Systems Dynamics in Mechanical Engineering,
Chapter 3: Mechanical Strength, Reliability, Risk Analysis and Assessment,
Chapter 4: CAD / CAM / CAE in Design and Engineering Research,
Chapter 5: Measurement Technology, Instruments and Sensors, Detection Technologies and Methodologies,
Chapter 6: Machine Vision Technology, Image and Video Processing,
Chapter 7: Embedded Systems, Electronics, Circuit Technology, Electrics, Electromagnetics, Power Engineering and Communication,
Chapter 8: Mechatronics, Industrial Robots, Automation and Control Technologies,
Chapter 9: Computer Applications and Mathematical Modeling, Intelligent Algorithms and Optimization,
Chapter 10: Green Supply Chain and the Internet of Things Development,
Chapter 11: Industrial Engineering, Production Management, Operations, Quality and Control, Chapter 12: Engineering Education
Les mer
<p>Selected, peer reviewed papers from the 4th International Conference on Advanced Design and Manufacturing Engineering (ADME 2014), July 26-27, 2014, Hangzhou, China</p>
- Preface and Conference Organization
- Chapter 1: Applied Engineering in Area of Heat, Fluid, Acoustic, Flow and Fields
- Analysis of 2-D Impedance Cloaking Problem Based on Boundary Element Method
- Analysis on the Inhomogeneity of Air Intake and Retrofit Optimization of the Air Intake Pipe in the Engine T12V190
- Control Approach in Cloaking Problems for 2-D Model of Sound Scattering
- Gas Dynamics in a Counterflow Cyclone with Conical Nozzles on the Exhaust Pipe
- Heat Transmitting Research on Fresh Water Cooling System of a Self-Elevating Drilling Unit
- Impact on the Performance of Micro-Nozzle Straight Exit Section
- The Calculation and Experiment Based on the Finite Difference Method for the High-Voltage Electrostatic Field of Melting Electron Beam Gun
- The Optimization on Grid Division Methods of Blade Pump Blades Based on CFD
- Analysis of Pulverized Coal Combustion in Precalciner Based on Fluent Software
- Analysis of the Smoke Flow in Subway Fire
- Flow Analysis on the Effect of Rotational Speed on the Characteristics of 3-Dimentional Screw Propeller of Ship
- Heating Coil and Delivery Pipe Design of Asphalt Heating Equipment
- Investigation of Heat Dissipation for Computer CPU Radiator
- Laboratory Researches of Resistance to a Heat Transfer of an Easy Protecting Design
- Numeric Analysis on inside Flow Field of Roots Compressor
- Study on the Rheological Properties and Shear Model for Magneto-Rheological Fluids
- Analysis and Optimization of Efficiency Rotor Wheels Microturbines
- Research on Jet Flame Extinguishing Process
- Chapter 2: Design and Systems Dynamics in Mechanical Engineering
- A Method of Calculation and Optimization Concerning the Dynamic Parameters of Joint Surface
- A Review of Product Design for Additive Manufacturing
- A Summary for Mounting Buffer Technology of Overhead Weapon Stations
- An Improved Alternating Active-Phase Algorithm for Multi-Material Topology Optimization Problems
- An Overview on Dynamic Research of Amphibious Vehicles
- Analysis of Chaotic Characteristics of the Strong Nonlinear Vibration Isolation System Based on Harmonic Balance Method
- Analysis on Angular and Torsional Deformation of Open Front Press
- Bi-Level Design Optimization of the Hatch Door Mechanism
- Calculation on Stator Core Dynamic Characteristics of 600MW Turbo-Generator Based on FEM
- Circular Jacking Method Study for Large Equipment
- Design and Analysis of a Novel Heavy-Load Positioner with Series-Parallel Mechanism
- Engine Crankshaft Counterweight Design Optimization
- Experimental Installation for the Study of Nozzles Microturbines
- Gravitational Potential Energy Recovery and Recycle of Rotary Drilling Rig Kelly Bar
- Improved Design of Large Tractor on Human-Machine Research
- Influence of Structure Parameters on the Permanent Magnetic Planetary Gear Forced Vibration Frequency Response
- Modeling and Solution of a Nonlinear Vibration Model of the Bending-Torsion Coupled Spur Gear Transmission System Based on Lumped Mass Method
- Multi-Objective Optimization for the Efficiency and Weight of Helicopter Transmission Planetary Gear Train
- New Process for Regeneration of Main Control Valve
- Optimization Design and Modal Analysis of Satellite SAR Deployable Support Structure
- Research and Development on a New Cylindrical Tea Carding Machine
- Residual Vibration of Flexible Exponential Cam Curves
- Sensitivity Analysis of the Elastic Properties of Rail Vehicle Suspensions on Vibration Based on the HXN5 Locomotive Model
- Strain Gauges Applied to the Lightweight Structures Modal Testing
- Study on the Shock Isolation Performance of the Woodpecker’s Head
- The Design of New Lock Keyhole and Cylinder
- The Influence of Initial Structural Density Value on Results of Multi-Material Topology Optimization Problems
- The Mathematical Model of Simulative Calculation for the Process of Airbag Landing
- The Numerical Simulation and Optimization of Feeding Velocity in Rubber Roller Husker Vibrating Feeder
- The Research and Analysis on Lockpin Synchronizer
- The Research of Rod Roller Conceptual Design Based on the Innovation Theory of TRIZ
- The Theory of Green Packaging Design and its Application
- Vibration Analysis of Rotating Cylindrical Shells
- Vibration Characteristic Optimization of Overhead Weapon Station Based on Dynamic Stability Concept
- Wear Prediction of Ball Screw Based on Adhesive Wear
- Application of Energy-Saving Principle of Mechanical Design in Hydraulic Excavator
- Backtracking Search Optimization Algorithm with Low-Discrepancy Sequences for Mechanical Design Optimization Problems
- Global Sensitivity of Random Parameters in Vibration Transfer Path Systems
- Study on Parameter Identification of Mistuned Blades Based on Static Frequency Test and Finite Element Method
- A Kind of New Automatic Lift Pump
- Analysis on the Mechanics Model of the Electromagnetic Permanent Magnetic Knitting Needle
- Application of Near-Field Acoustic Holography to Identify the Mechanical Noise Sources on the Submarine
- Optimization of Integral Steering Trapezoid of Commercial Vehicle Based on MATLAB
- Pumping Unit Suspension Point Direction Balance Theory Analysis Method and Effect Evaluation
- Research on Working Characteristics of Automatic Vent Valve and Gas Purification Equipment in the Oil Field
- Strength Design for Star Sprocket Based on ANSYS
- Study of Truck’s Aerodynamic Drag Reduction Based on Jet
- Test and Analysis about Elastic Properties of Commercial Vehicle Cab Air Spring
- Choosing Plastering Machines and Dry Mortars for Plastering Mechanized Way
- Characteristic Variable Based Robust Design for Dynamic System
- Acoustic Optimization for Intake System of Commercial Bus
- Analysis on the Side Leakage Amount of the Friction between Piston and Cylinder Block in Axial Piston Pump
- Theoretical Analysis of CO2 Bubble Formation in Anode Flow Field of μDMFC
- Microturbines Degree of Reactivity
- Multi Variable Multi Objective Optimization for the Cutting Head of Roadheader
- Folding and Deployment of a New Thin-Walled Tube Flexible Hinge
- The Use of Decentralized Ventilation Systems with Heat Recovery in the Historical Buildings of St. Petersburg
- 1250mm2 Conductor Self-Damping Characteristics
- Using Adams/Car and Insight in Simulation and Optimization on Guiding Mechanism of Air Front-Suspension
- Road Bank Angle Estimation for Land Vehicle
- Chapter 3: Mechanical Strength, Reliability, Risk Analysis and Assessment
- Antiknock Performance Comparison Analysis of Refuge Chamber Cabin Based on Different Stiffeners
- Quantitative Fire Risk Assessment of Gas Pipeline Leakage
- Reliability Analysis about A/C-Axis of Woodworking Five-Axis Milling Head
- Reliability and Sensitivity Analysis of Mechanical Structures Based on Dimension Reduction Method
- Research on Method of Prediction of Mechanical Equipment Reliability Based on Physical Character
- Risk Assessment of City Pipe Network Based on Matter-Element and Extension Model
- Reliability Analysis of Automobile Engine Connecting Rod Using Fourier Orthogonal Neural Network Method
- Application of the Risk Theory to Management Reliability of the Pipeline
- Machinery Risk Analysis Application in the System of Employee Training
- Study of Computation for Structural Reliability Index Based on Penalty Function Method
- Calculation of Vortex-Induced Resonance on a Thermo Well
- Pipelines Stability under Extreme Hydrodynamic Conditions
- Investigation of Approximation Methods for Mechanism Reliability Analysis Considered Nonlinear Response
- Risk Assessment of Ship Oil Spills in the Ningbo-Zhoushan Port
- Risk Assessment for a Main Pipeline under Severe Soil Conditions on Exposure to Seismic Forces
- Analysis on Failure of Accumulator of Horizontal Cold-Chamber Die Casting Machine and Accident Prevention
- An Oil and Gas Pipeline Accident Model Based on Failure of Generalized Management
- Research on Method to Analyze Reliability of Equipment Based on Fault Information
- Chapter 4: CAD/CAM/CAE in Design and Engineering Research
- Design and Development of Automated Tire FE Modeling Procedure
- Efficient NC Tool Path Planning Based on the Subdivision of Sculptured Surface
- Establishment Method of the Simplified Model for Research on the Crashworthiness of B-Pillar in Side Impact
- Finite Element Analysis of Mechanics Property on Memory Alloy Patella Claws with Anti-Shearing Force
- Generation of the Underdraught Points Uniformly Distributed Contour Tool Path for CNC Incremental Forming
- Interactive Animation Construction in Virtual Environments
- Modal Analysis of Gear Transmission System Based on ANSYS
- Numerical Simulation Study on Optimization of Solar Flat-Plate Collector
- Optimization Design for Cooling Channel of the Single Screw Extruder Barrel
- Simulation Analysis of Engine-Oil inside the Clearance between Crankshaft Journal and Bearing Shells in the Ideal Stable Conditions
- Simulation of Gear System Based on Dynamic Relaxation
- The Finite Element Analysis of Lei-Ring Applied to Upright Column for Hydraulic Support
- The Parametric Design of Pulley Based on AutoCAD
- The Strength Analysis of the Turbine Blade Based on Finite Element Method Calculation and Optimization
- Tool Path Generation for Machining Point Cloud Data by Least Squared Projection
- Typical Workpiece Contour Surface NC Milling Tool Path Determination
- A New Approach for Folding Process Modeling of Passage Airbag
- Multi-Domain Unified Modeling and Simulation of the Electrical Vehicle
- Parametric Design of ITER Outer-Cryostat Based on Application Development of CATIA
- Rapid NC Machining Technology for Hole and Groove Parts Based on UG Feature Recognition
- Impact of Grid Type on the Stress-Strain of 175F Diesel Engine Piston Structure Calculated by the Finite Element
- Intelligent Cutting Tool Selection for Milling Based on STEP-NC Machining Features
- Performance Evaluation of Spring for the Vehicle Suspension System Using the Nonlinear Finite Element Method
- Research on the Angle of Swirl Chamber Diesel Engine with Dual Channel
- A Fast Method of Dynamic Maize-3D-Modeling Based VRML
- Build 3D Electronic Map Lama Temple
- Research and Application of Cutting Efficiency Optimization Based on VERICUT and UG
- Integration of 3D Mechanical and 2D Electronic Design Based on Open CASCADE
- Development of Ship-Building Assembly System for Ship’s Blocks Using 3D Measurements System
- Research on Key Technology of CAD for Crystal Lamp with Planar Distribution
- Side Impact Safety Design of Vehicle Based on Implicit Parametric Technology
- Chapter 5: Measurement Technology, Instruments and Sensors, Detection Technologies and Methodologies
- 3-D NC Testing Platform Based on Motion Control Card
- A Device Developed for Soil Shear Strength Measurement
- Advanced ZigBee Routing Strategy of Offshore Wind Monitoring System
- Catering Revenue Metering System and its Application
- Characterization of High-Throughput Capillary-Based Microfluidic Devices for Lab-on-Chip Integrated Optics Detections
- Combined Forecast of Calibration Interval Based on Linear Trend Model and Neural Network
- Development of GIS Partial Discharge Detection System Based on the New UHF Sensor Combination of Switchgear
- Elasto-Optic Constant of PMMA Measurement Using Linear-Least Squares Method
- Experimental the New Fuel Selector Valve Control Box Automatically Checks Instrument Research and Design
- Measuring Limitation Analysis of Six-Axis Wrist Force Sensor Based on Screw Theory
- Method Design and Failure Analysis of the Penetration Test on Seamless Gas Cylinders
- Monitor Method of Offshore Wind Turbine Based on Memory-Like and Neural Network Expert System
- Non-Destructive Measurement of Doublet Objective Lens Structure Parameters Based on ZEMAX
- Odor Detecting Experiment and Result Analysis Based on Photoionization Detector
- Remote Dynamic Monitoring System in Groundwater Engineering
- Research of Airflow Level Posture Sensor Wire Thermal Structure
- Research of CBR-Based Organizations on Aromourd Equipment Fault-Diagnosis
- Research of DC Panel Battery Fault Detection Method
- Research of Portable Vehicle Oil Performance Detector
- Research of Two-Dimensional Airflow Angular Velocity Sensor
- Research of Ultrasonic Distance Measurement System Based on Pseudo Random Digital Correlation
- Research on Accelerated Life Test System for Water Quality Analyzer
- Research on Structure of the Airflow Level Posture Sensor
- Research on Vibration Effect of Ultraprecise Optical Encoder for Micro/Nano Measurement
- Shear Strength Monitoring System Based on Measurement of Shear Wave Velocity and Moisture Content
- Signal Processing Circuit Design Based on SOPC Technology for the Electric Field Type Time Grating Sensors
- Space Measurement System Design and Space Environment Adaptation Experiment of Commercial Sensor DS18B20
- Structural Design of Large Size Measuring Machine Base on Electro-Optic Automatic Detection
- Structure Analysis of a Pre-Stressed Six-Axis Force Sensor
- Study of a Measurement and Control System of Industrial Site
- Study of the Gas Pendulum Characteristic of Enclosure with Small Size
- The Design of Laser Wavelength Measuring System Based on DSP
- The Fault Pattern Identification of Hydraulic Pump Based on the Sensitive Component STSA
- The Method of Inter-Well Remaining Oil Detection
- The Optimal Location of Piezoelectric Sensor/Actuator Based on Adaptive Genetic Algorithm
- The Review of Track Inspection Technology and Application Prospect on Subway
- Time Delay Estimation in Reverberant Environment Based on Acoustic Pyrometry
- Application on State Evaluation of the Grounding Conductor Based on Fault Diagnosis Method
- Calibration of Thermostatic Bath Used on Electronic Thermometer Verification
- Ground-Based Videometric Method and System for the Real-Time Measurement of Aircraft Landing Track
- Measurement of Geometric Parameters for Cutting Tools Based on MATLAB
- Monitoring Growth Characters and Yield with Hyperspectral Remote Sensing in Wheat
- The Application and Research of Order Analysis in Gearbox Fault Diagnosis
- The Monitoring and Fault Diagnosis System for Controllable Pitch Propeller Based on LabVIEW
- A Novel In-Line Fiber Mach–Zehnder Interferometer Temperature Sensor Made of Thermally Expanded Core Fiber
- A Study on Data Communication Method for Building Detection Based on Wireless Sensor Network
- Analysis and Processing of Sampled Measurement Values Transmission Delay for Smart Substations Processing Layer
- Assembly Quality Detection Software for Combine Harvester Based on Vibration Spectra Analysis
- Comparisons on Reliability of Likert Scale between Crisp and Fuzzy Data
- Data Aggregation Based on Saving Energy and Preserving Privacy in Wireless Sensor Networks
- Design and Analysis of Constantan Thin Films Sensor for Monitoring Cutting Force
- Design of the Intrinsic Safety CO Monitor with Low Power Consumption
- Development of Key Reliability Tester
- Multi-Channel Simultaneous Data Acquisition System with Variable Sampling Rate
- Somatosensory Application Study Based on Kinect Skeletal Tracking
- Vibration Signal of Generator Features and its Fault Diagnosis Application
- The Fault Diagnosis Method of Diesel Based on Wavelet Pocket and BP Neural Network
- Study on Inversion Surface Parameters of Remote-Sensing Information Serving Vegetation-Surface
- Transmission Method Based on Small Relay Core for Achieve Dynamic Measurement of the Flatness
- Multiple Leakage Detection and Localization Method Based on Bayesian Theory and Genetic Algorithm
- Novel Low-Frequency Rectangular-Loop Piezoelectric Energy Harvester
- Research on the Evaluation of Plane Orientation Error Based on Uncertainty Theory
- Research on Solar Panels Online Defect Detecting Method
- The Design of Eddy Current Sensor Based on ANSYS and the Research on Weld Flaw Recognition Method
- Distance Measurement Algorithm Based on Binocular Stereo Vision
- Optimal Experiment Design of Travel Time Tomography with Sparse Rays
- Experimental Research on Energy Spectrum Analysis on Chips from Aeroengine Oil System
- Instrumentation of On-Line Detection of Microbial Density
- Feature Extraction of Valve Faults with Fixed Time Basis for Multi-Resolution
- Array DOA Estimation by the Model of Four Elements in Quare Array Based on the Theory of Compressed Sensing
- Chapter 6: Machine Vision Technology, Image and Video Processing
- A New Edge Detection Algorithm Applied in Obstacle Identification of Unmanned Vehicle
- Based on the Adaboost Algorithm of Face Detection Research
- Defect Inspection for SMD Inductors
- Image Adaptive Denoising Method Based on Compressive Sensing
- Object Classification via PCANet and Color Constancy Model
- Research Object Rotational Motion Estimation Based on Digital Video Analysis Technique
- Determining Intrinsic Parameters and Pose of Cameras from Single View with Variable Focal Length
- A Retrieval Strategy for Texture Image
- An Efficient Concealment Algorithm for Inter Frames Based on Block-Level and Pixel-Level Motion Vector Extrapolation
- Paper Currency Image Features Extraction and Recognition Based on Gabor Filter
- Retrieval Model Based on Image Content Features
- Similarity Measure for Image Retrieval Based on Hausdorff Distance
- The Simulation of Infrared Imaging Based on Vega
- Vein Image Segmentation Based on One-Dimentional Gray and Filter Erosion Method
- Research on Background Modeling Based on Low-Rank Matrix Recovery
- Chapter 7: Embedded Systems, Electronics, Circuit Technology, Electrics, Electromagnetics, Power Engineering and Communication
- A 5GHz Analog Laser Diode Driver for Radio-over-Fiber Transmission Applications
- A Digital Carrier Monitoring System Based on Software Defined Radio
- A Speculative Approach to Improve the Double Instruction Executions in the Embedded Chips
- Achieving the Multi-Scroll Chaotic Attractors’ Synchronization in the Four-Dimensional System by Driving-Response Synchronization Method
- Design and Simulation of OFDM System Based on Matlab
- Design of Smart Home System Based on Zigbee
- Optical Fiber Dispersion Compensation Based on Optic System
- Passive Optical Network System Performance Analysis Using a 10 Gbit/s DML
- Program Design Based on Communicate by PSPICE and MATLAB
- Study of Hierarchical Voltage Predictive Control for Power System
- Study on Characteristics and Application of LED Displays
- Study on the Driving Circuit of Carbon Nanotube Field Emission Display Based on Luminance Control
- The Design and Simulated Analysis of Laser Beam-Shaping System for the Flow Cytometry
- The Development and Solution of Intelligent Secondary Power in Space
- Traffic Groomings and Graph Designs
- A Design of Position Terminal Based on BDS
- Research on Multi-Scroll Chaotic Attractors Synchronization Technique
- Finding Most Vital Node in Satellite Communication Network
- Research of Power Communication Network System’s Reliability Based on Cloud Model and Fuzzy Petri Nets
- Research on Technology of Lightning Protection for Transmission Lines in Lighting Intensified Area with Complex Topography
- Study on Si-Based LED Integrated Packaging with Vertical Structure
- Design of Small Variable Frequency Speed Regulation System Based on ARM
- Effect of Pixel Shape on Fluid Motion in an Electrofluidic Display
- Research on Optimization of PV Array on Roof
- Research of JMS Security Mechanism
- Design and Realization of Universal Integrated Testing Platform for Equipment-Embedded Software
- Chapter 8: Mechatronics, Industrial Robots, Automation and Control Technologies
- A Novel Half Bridge Drive Circuit Applied in IGBT Module
- A Smart Remote Controlled Multi-Functional Lighting System
- A Study on Multistage Coordination and Control Strategy for JiBei Grid Considering Wind Power Fluctuation
- Active Fault Tolerant Control Based on Fault Estimation
- Analysis and Experiment of the Multi-Needles Trajectory in Magnetic Driven Model
- Analysis on Power Loss of the Three-Phase Induction Motor Fed by VVVF under Constant Torque Load
- Control Algorithm Study on Cantilever Machine Teaching-Playback
- Design and Analysis of a XY Micro-Motion Stage Based on S Type Flexible Mechanism
- Design and Research of Quadcopter Navigator
- Design of a New Crawler Chassis Brake System
- Design of Automatic Rolling and Breaking Up Tea Machine on TRIZ Theory
- Design Principle and Method of a Passive Hybrid Damping Suspension System
- Development of Experiment Platform of PMSM Control System in Electric Vehicles
- Dynamic Performance Study of Stewart Parallel Mechanism Based on Natural Frequency
- Modeling and Simulation of Slip Frequency Control for Induction Motor in Electric Vehicle EHPS System
- Pouring Point Location Method for Concrete Pump Truck
- Simulation on Fuzzy Control on Chatter System Based on Magnetic Fluid/Foam Metal
- Study on High Precision Control Scheme of Ceramic Ferrule Concentricity Grinder
- System Design to Prevent the Mine Transport Vehicles Stall
- The Dynamic Swing-Up Control of Ball and Beam System Based on Periodic Input
- The Guidance and Control of Wire-Guided Torpedo in the Condition of the Torpedo Noise Covering the Target Noise
- Three-Dimensional Trajectory Control via Nonlinear Adaptive Approach
- Type Synthesis of a 1T Symmetric Coupling Mechanism with the Method of Separation and Merger
- Warp Tension Control System Based on IMC
- A New Structure Design Method for Improve Modular Joint Output Performance in Modular Robot
- Design and Experiment on Chinese Prickly Ash Automatic Picking Device
- Design of the Vitreous Bio-Micro-Channel Fabricating Device in Microfluidic System
- Kinematical Simulation of 3-DOF Parallel Mechanism Based on ADAMS
- Multi-Body Dynamics Modeling of a Spherical Mobile Robot
- Neural Network Compensation Method for Path Tracking Control of a Spherical Mobile Robot
- Research on Obstacles Avoidance for UAV SLAM
- Study on a Fast Tool Servo (FTS) Driven by Piezoelectric Ceramic
- Design of Automatic Control Device of Central Heating Temperature
- Drive-Train Control Strategy for Improving the Efficiency of RBS
- H ∞ Control for a Class of Uncertain Fuzzy System by Controller Switching
- Inverse Kinematics Solution and Optimization of 6DOF Handling Robot
- Modeling and Control of a Micro Flapping Wing Rotor
- Research of the Simulation Experiment Platform for Grinding Process Control
- Researches on PID Controller Parameters Optimization Using IWO
- Study on Photovoltaic Cell and its MPPT Control Simulation
- Tracking Control for a Class of Switched Fuzzy Systems
- The Performance Testing System of Force Motor Valve
- Complex Parts Design Based on Macro Programming
- Design of Rotary Flexible Manufacturing Cell with Multi-Station Automatic Stretching
- NURBS Curve Real-Time Interpolation Feed Speed Planning for CNC Machining
- User Modeling in Adaptive Human-Computer Interface for Turret
- Experimental Analysis on the Operating Performance of Induction Motor with Unbalance Power Supply Conditions
- Kinematic Optimization of Corn Full-Automatic Transplanting Mechanism with Non-Circular Gears Based on Matlab
- A New Position-Estimated Algorithm of PMLSM Sensorless Driving System in Full Scope of Speed
- Comprehensive Compensation System Based on CS-APF and SVC
- Research of Resistance Furnace Temperature Fuzzy Control Based on LabVIEW
- Hysteresis Neural Network Modeling and Compensation of Piezoelectric Actuator
- Reentry Trajectory Optimization and Simulation of Hypersonic Vehicle with Maximum Cross Range Based on GPM
- Design of Demisting System in Vehicle Dome Based on Fuzzy Control Algorithm
- Design of Output Feedback Controller for Switched Fuzzy Systems with Time-Delay
- Intelligent Controller Design for Nonlinear Piezoelectric Smart Actuators
- Research on the Simulation of Tension Control System of the Traction Wire Rope Cleaning and Detection Line of Pay-Off Unit
- A GPS-Assisted Calibration Algorithm for Misalignment Angle between Star Sensor and Strap-Down Inertial Navigation System
- Chapter 9: Computer Applications and Mathematical Modeling, Intelligent Algorithms and Optimization
- A Clustering Algorithm Based on Improved Particle Swarm Optimization
- A Digital Forensics Method in Cloud Computing Environment
- A Hybrid Keyword Extraction Method Based on TF and Semantic Strategies for Chinese Document
- A Modelling Method for Cross-Organizational Business Process Collaboration Based on Petri Net and Process Algebra
- A New Imputation Method for Treating Missing Precipitation Records
- A Novel Garment Prototyping Algorithm
- A Study of RCS Parallel Computing Based on MPI and FDTD
- An Energy Based Octree Streamline Algorithm of Mass Point Cloud
- Analysis on Modern Datacenter Planning in Chinese Traditional State-Owned Enterprises
- Application of Log4j in E-Commerce Services
- Comparison and Analysis of Routing Protocols Based on OPNET for Fiber-Wireless Broadband Access Network
- CPbot: The Construction of Mobile Botnet Using GCM
- Design and Implementation of Distributed Cache System in Cluster Environment
- Design and Implementation of Financial Virtual Experiment Teaching System Based on MATLAB and Data Warehouse
- Design and Implementation of the Routing Function in the NOX Controller for Software-Defined Networks
- Design and Validation of Extended CSP Model
- Design Research in Motion Cloud Computing Platform Based on a Training Aid System
- Development of Research on Process Algebra
- Dynamic Simulation of Four-Bar Mechanism Based on MS Excel
- Global Existence and Blow-Up of Weak Solutions for Nonlinear Wave Equations
- Haar Wavelet for the Natural Boundary Integral Equation
- Intrusion Detection Model Based on Fuzzy Comprehensive Evaluation
- Local Access and Security Strategies of Medical Data
- Numerical Solution of Nonlinear Volterra Integro-Differential Equations of Fractional Order by Using Adomian Decomposition Method
- Part Family Formation Based on Clustering Algorithm and BP Network
- Research on Appraising of Tactical Internet Simulative Training
- Research on Automatic Testing Framework
- Research on Development and Key Technologies of Cyberspace
- Research on Remote Monitoring System Based on Web Services
- Research on Software Security Vulnerability Discovery Based on Fuzzing
- Resource Schedule Algorithm Based on Artificial Fish Swarm in Cloud Computing Environment
- Simulation of Fluctuating Wind Speeds Based on Data-Driven Approaches
- Study of a New Parallel K_NN Network Public Opinion Classification Algorithm Based on Hadoop Environment
- Study on the Host Security Protection in the Internet Environment
- Study on the Method of Military Software Fault Diagnosis Based on Hybrid Reasoning Strategy
- Temporal-Spatial Information Fusion Method of Fault Diagnosis Based on Clustering Means Centralization
- The Design of Quality Traceability System for Agricultural Products Based on Supermap
- The Research of Computer Monitoring System
- The Situation Analysis of MANET Based Hierarchical Routing Protocols
- Two Typical Symbols in Human-Machine Interactive Interface
- Deep Study and Improvement of the Globally Convergent Version of MMA
- Research on Evaluation of Soil Fertilities of Farmland at County Level in Nongan Based on Data Mining
- State Attainability Analysis of Petri Net with Discrete Time Span
- Study on Energy Consumption Prediction of Liquor-Making Based on GA-BP Neural Net
- AGROTOOL Software as an Intellectual Core of Decision Support Systems in Computer Aided Agriculture
- Analysis and Simulation of Binary Search Algorithm
- Application of Grey Model Theory to Forecast Flight Training Time
- Comparison of Genetic Algorithm and Determinant Method on Solving a System of Linear Equations
- Comparing Mathematical and Heuristic Rules for Solving Single Machine Scheduling Problem with Release and due Date Constraints
- Design and Application of Digital Tourism Platform
- Intelligent Identification of Flow Regime Based on a Novel Neural Network
- Internet System for Mathematics Reading and Fuzzy Clustering Analysis for Students
- Local Outlier Detection Algorithm Based on Coefficient of Variation
- Multi-Objective Optimization for Flight Instructor Scheduling
- Research on QoS Multicast Tree Based on Ant Colony Algorithm
- Study on E-Government and its Decision Support System
- The Application Research Based on Arduino and Kinect
- Dimension Reconstruction Optimize Chaotic Ant Swarm Algorithm
- An Integrated Approach to Correlated Multi-Response Optimization
- Using Movement Range Strategy of the Improved Ant Colony Algorithm for Solving Continuous Problems
- Research on Improved Genetic Algorithm
- Application of Topsis Method in Target Value Assessment of Infantry Division Joint Fire Strike
- Chapter 10: Green Supply Chain and the Internet of Things Development
- A Study on Leagile Supply Chain Model and Performance Evaluation System Based on Lean Agile Theory
- Laboratory Management System Based on Internet of Things
- Multi-Stage Emergency Resources Management Based on Supply Chain
- Research on the Influence Mechanism of After-Sales Service Model to Remanufacturing Technology Transfer in Green Supply Chain
- Study on the Stability of Supply Chain System Based on Production Decision
- Warehouse Management System Model Based on Petri Net
- Research on the Construction of Smarter Campus System Based on Mobile Phone M2M
- Chapter 11: Industrial Engineering, Production Management, Operations, Quality and Control
- A Dynamic Simulation Approach for Flexible Manufacturing System Design
- A Rapid Adjustment Simulation System for Flexible Fuselage Assembly
- Agricultural Machinery Spare Parts Demand Forecast Based on BP Neural Network
- Analysis for Assembly Dimension Chain of RV Reducer
- Analysis of Spare Model in Equipment System Based on Probability of Spares Sufficiency
- Evaluation Model for Heavy Machine Tool Remanufacturing Scheme Based on ANP
- Fixture Fault Diagnosis in Multistation Assembly of Sheet Metal
- Framework of Order Planning and Scheduling System for MTO Enterprise
- Health Assessment of Ecosystem in Manufacturing Enterprise Life Cycle Oriented
- Manufacture of Flexible Automatic Assembly Platform for Aircraft Component Level
- Multi-Hierarchy Relevance Model of Cloud Manufacturing Resource Based on OWL
- Research of Industrial Collaborative Manufacturing System on Based on Cloud Computing
- Research on Decision-Support System of CBR Armored Equipment Maintenance
- Research on Modeling High-Mix and Variable-Batch Flow Manufacturing System
- Research on Repair Time Modeling in Virtual Maintenance Simulation
- Single-Machine Batch Delivery Scheduling and Common due Date Assignment with Identical Processing Times
- Study on Optimization Matching Algorithm for Automotive Powertrain
- The Analysis and Application of VSM in a Shoemaking Enterprise
- The Design and Realization of HRA Service System for the Engine Assembly
- The Research on the Evaluation of Equipment’s Dependability
- Extracting Product Quality Information Expressed by Customers from Web Forum and its Applications
- Application of AMGA in the Mixed Model Two-Sided Assembly Line Type I Balancing Problem
- Application of ERP-Systems on Russian Construction Sites
- Improving the Flow of Information from the Bidding Process for Public Works Aimed at Achieving LEED Certification
- Product Development Model Focused on the Telecommunication Service
- Production Operation Management Research of Mixed Private Cloud Enterprise
- Research into the Virtual Simulation and Scheduling Optimization Technology in Ship Dock Assembly Process
- Research on Evaluation Method of CNC Gear Form Grinding Processing Performance
- The Quality Data Model of Product Lifecycle and Base Application in Electronic Components Industry
- Study on Multi-Specification Small-Batch Line Balancing and Optimization Base on the Streamline Balancing
- Discussion of Pallet Transportation and Lifting Method for Integrated Construction Technology
- Research on Framework System for Product Lifecycle Knowledge Reuse
- The Research of External Factors in Product Image Design
- Creative Thinking in Product Innovative Design: A Handcuff Case Study
- Study on Human Errors in Substation Based on GEMS
- Study on Optimization of same Route Departure Flights
- Configuration Model Research Based on Product Family Configuration Unit
- Researching Oil Purification Equipment System Fuzzy Reconfiguration
- The Design of Portable Electric Cooker
- Multi-Stage Combination Prediction Model of Technical Condition Parameters of Equipment
- Mine Hoist Process Management System Based on B/S Structure
- Research on Quality Evaluation Index System Based on Representative Equipment Maintenance Process
- Analysis Research of Maintenance Quality Evaluation Methods on Equipments
- Research of Impact of Capital Allocation on Chinese Manufacturing Industry
- Research on Method about Determination of Condition-Based Maintenance Objects by Quantitative Analysis
- Solar Power Supply in the System of Restoration and Reconstruction Remote Historic and Cultural Objects (on the Example of Montenegro)
- The Study on Tiered Tap Electricity Price Based on the Price Packet Service
- The Effect of the Income Level and Purchasing Method on the Purchase of High-Efficiency Appliances
- Environment Analysis of the High Technology Industry in China
- Using Plastering Machines to Improve the Efficiency of Finishing Works
- Chapter 12: Engineering Education
- Distant Learning Course “Energy Efficient Refurbishment Management”
- Research of Teacher Education Technology Capacity and Training Modes
- Thoughts and Practices to Improve Higher Engineering Education under the Background of Mass Education
- Under the Guidance of “Macroscopic Engineering”, Cultivate the Engineering Quality of College Students in Muti-Measures
- Activities of Civil Engineering Institute to Attract Foreign Students for Training in Civil Engineering Programs
- Information-Technology-Enabled Teaching Paradigm Reform Based on Massive Open Online Courses and Flipped Classroom
- Relevance of Education in Construction Safety Area
- Academy of Construction for University Applicants as a Tool of University Online Marketing
Les mer
Produktdetaljer
ISBN
9783038352570
Publisert
2014-11-05
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
4000 gr
Høyde
240 mm
Bredde
170 mm
Dybde
106 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
2112