9th International Conference on Key Engineering Materials (9th ICKEM 2019)

Selected, peer reviewed papers from the 9th International Conference on Key Engineering Materials (9th ICKEM 2019), 29 March - 1 April, 2019, Oxford, United Kingdom

• Preface
• Chapter 1: Biomedical Materials
• The Effect of Sintering Aid on Fabrication of Three-Dimensional Carbonated Hydroxyapatite Porous Scaffolds
• Evaluation of the Sorption Properties of a Self-Adhesive Hydrogel Wound Dressing
• Characterization of Zn-1.5Mg and Zn-1.5Mg-0.5Ca Alloys Considered for Biomedical Application
• Polyvinyl Alcohol Hydrogel Reinforcement of Cellulose and Silica Nanoparticles for Wound Healing Application
• Synthesis and Characterization of a Polymer Matrix of Carrageenan, Chitosan and Hyaluronan on Stainless Steel 316L
• Chapter 2: Novel Composite Materials
• Multiscale Finite Element Simulation of Thermal Properties and Mechanical Strength of Reduced Graphene Oxide Reinforced Aluminium Matrix Composite
• Compression Capacity of Corrugated Core Hybrid Composite Sandwich Structure
• Influence of Multi-Walled Carbon Nanotube Addition on the Hardness of NiAl-CNT and NiAl₃-CNT Composites
• Connection Performance of Bolted Aluminum Alloy Honeycomb Panel-Beam Composite Structure
• Recycled HDPE/PET Clay Nanocomposites
• Enhancing Dispersion of Silica Nanoparticles with Ammonium Laurate Surfactant for Natural Rubber Latex Composites
• A Nanoindentation Study on Al (TiFe-Mg-SiC) Composites Fabricated via Stir Casting
• Effect of Polyethylene Glycol in Nanocellulose/PLA Composites
• Synthesis of Natural Composite of Natural Rubber Filling Chitosan Nanoparticles
• Investigation of Thermoelectric Performance of MoS₂-Templated Polyaniline Nanocomposites
• Mechanical Properties of Ternary-Filled Natural Rubber Composites
• Numerical Investigation of Stress-Strain State of Composite Compressor Blades in the Field of Centrifugal Forces
• The Study on Impact Resistance of Metal Rubber for a Product
• Fracture Toughness of CF-Plug Joints of Ti and Epoxy Matrix CFRP
• Chapter 3: Novel Polymer Materials
• Parametric Study on Surface Roughness of Metallized Parts Manufactured by Additive Manufacturing
• Study on Unbalanced Competitive Adsorption of Two Ginsenosides by Molecularly Imprinted Polymers
• Design of Extrusion Die Geometry for Making Sheets from a Mixture of Metal Powder and Polymer
• Properties of Porous Polyimide Films Based on Melamine Template
• Anisotropy Evaluation of Different Raster Directions, Spatial Orientations, and Fill Percentage of 3D Printed PETG Tensile Test Specimens
• The Study and Development of Factor Affecting the Smoothness in 3D Printed Part Surface Treatment via Acetone Vapor
• Chapter 4: Applied Technologies of Chemical Production
• Effect of PVP on the Morphology and Growth of Cu Hierarchical Nanostructures Prepared by Electroless Deposition
• Performance of a Diesel Engine Fuelled with Nanoparticle Blended Biodiesel
• Effect of La₂O₃ Derived from Thai Monazite Ore Chemical Processing on the Properties of SO₄^-1/ZrO₂
• Effect of Hydroentanglement on Structures and Properties of Wet-Laid Paper Sheets
• Chapter 5: Properties and Processing Technologies of Steel and Alloys
• The Effect of Variable-Frequency Ultrasonic Melting Treatment Technology on Microstructure and Properties of AZ80 Magnesium Alloy
• On FSW Keyhole Removal to Improve Volume Defect Using Pin Less Tool
• Effect of Gold Nano Dots in Microwave Brazing: A Novel Approach to Join Ti6Al4V to MACOR^®
• Non-Oriented Silicon Iron Alloys Used in Efficient Electrical Motor Production
• The Influence of Un-DRXed Grains on Mechanical Properties of Mg-Zn-Mn-La-Ce Alloys
• Micro-Embossing Process in Ultrafine-Grained Pure Aluminum Processed by Equal-Channel Angular Pressing with Elevated Temperature
• Thermal Stability of Nanocrystalline Soft Magnetic Alloys with Different Inhibitors
• Comparison of Predicted Forming Limit Curves with Measured Experimental Data on Hot-Dip Zinc-Coated Cold-Rolled Steel by Incremental Forming Process
• Preparing the Melt for the Amorphous and Nanocrystalline State
• Chapter 6: Protective Coatings and Corrosion Behaviour of Materials
• Electrophoretic Deposition of Polyaniline on a Copper Substrate and its Application in Corrosion Resistance
• Study of Corrosion Behaviour of Carbon Steel in Evian Derived Solution from Electrochemical Techniques
• Tool Wear in Intermittent Cutting of AISI 304 Stainless Steel by Thermally-Sprayed Coatings
• Factors Influencing Hardness of a Coating Material for Coating a Machine Component
• Structure and Properties of Detonation Coatings Based on Titanium Carbosilicide
• Electrochemical Study of Calcareous Deposit Formation in Simulated Soil Solution under Cathodic Protection
• Self-Healing Epoxy Coating Modified by Double-Walled Microcapsules Based Polyurea for Metallic Protection
• Evaluation of Wear and Corrosion Behaviour of Hybrid Sintered Ti₆Al₄V Alloy
• Mechanical and Corrosion Behavior of Pure Aluminium Added Friction Stir Weld Joint of Aluminium Alloy
• Chapter 7: Materials and Technologies in Environmental Engineering
• Properties and Filtration Performance of Porous Clay Membrane Produced Using Sawdust as Pore Forming Agent
• Feasibility Study on the Application of Fabricated Multipurpose Food Packaging Plastic (MFPP) Liner as Alternative Landfill Liner Material in Sustainable Landfill Infrastructure Model
• Nano Calcium Carbonate Production Utilizing Solvay-Process Industrial Wastewater and Carbon Dioxide
• Assessment of the Degradability of Commercially-Available Biodegradable Plastic Utensils in Soil and UV
• Photocatalytic Fuel Cell Using TiO₂/ZnO/Zn Photoanode for Greywater and Bacteria Abatements with Power Generation Concomitantly
• Evaluation of the Colorimetric Performance of Unmodified Citrate-Stabilized Silver Nanoparticles for Copper (II) Sensing in Water
• WO₃/Nb₂O₅ Nanoparticles-Decorated Hierarchical Porous ZnO Microspheres for Enhanced Photocatalytic Degradation of Palm Oil Mill Effluent and Simultaneous Production of Biogas
• Chapter 8: Materials and Materials Processing Technologies in Electronics, Energy Production and Energy Storage
• Solid State Reaction Synthesis and Characterization of Lithium Lanthanum Titanate Lithium-Ion Conducting Solid Electrolyte with Different Li to La Content
• Effects of Mixed Halide Ions Incorporation on CH₃NH₃Pb(I,Br)_3-x(SCN)_x Perovskite Films via Solution Deposition Route
• Atmospherically Stable Silver Nanowire/Hydroxyethyl Cellulose Films and their Application in Flexible Transparent Touch Screen
• Numerical Simulation of Single Junction InGaN Solar Cell by SCAPS
• Flexural Vibration Attenuation Properties of Phononic Crystals
• Morphology, Ionic-Molecular Interaction and Ionic Conductivity Behavior of PMMA/ENR 50 Electrolytes Containing Carboxylic Acids Modified SiO₂ Fillers
• Expanded Graphite/Epoxy/Aliphatic Amine Composites for Bipolar Plates Applications in Polymer Electrolyte Fuel Cells
• Chapter 9: Functional Ceramics
• Influence of B₂O₃ on Dielectric, Mechanical, and Thermal Properties of MgO-Al₂O₃-SiO₂ Glass-Ceramics
• Effect of Heating Rate on the Microstructure and Mechanical Properties of Spark Plasma Sintered CNTs Reinforced Nickel Aluminide
• Numerical Modeling of PZT- Piezoelectric Composites with Passive and Active Polymer Matrix
• Effects of Antioxidants Particle Size on Oxidation Resistance of MgO-C Refractory
• Chapter 10: Materials and Technologies in Construction
• Stability Analysis of Cylindrical Shells Resting on Winkler Elastic Foundation Using Semi-Analytical Quadrature Element Method
• Strengthening of Reinforced Concrete Beams Using Bamboo Fiber/Epoxy Composite Plates in Flexure
• A Review Study on the Characterization of Geopolymer Concrete
• Acoustic Emission Signals of Pull-Off Test for Concrete Slab Strengthened with CFRP Using Various Surface Preparations
• Effect of Dipotassium Hydrogen Phosphate and Calcium Nitrate on Strength and Microstructural Properties of Geopolymer Mortar
• Compressive Strength Variations in Lightweight Aggregate Concrete Samples Affected by Segregation Caused by Excessive Vibration
• Prediction of Bending Beam Rheometer Test Outputs Using Artificial Neural Networks
• Tensile Test Method for Basalt Roving
• Mechanical Performances of Green Engineered Cementitious Composites Incorporating Various Types of Sand
• Energy Savings of PCM-Incorporated Building in Hot Dry Climate