Advanced Concepts in Mechanical Engineering II
Heftet /
2014
/ Engelsk
Produktdetaljer
ISBN
9783038352723
Publisert
2014-11-19
Utgiver
Trans Tech Publications Ltd
Vekt
1300 gr
Høyde
240 mm
Bredde
170 mm
Dybde
33 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
652
Collection of selected, peer reviewed papers from the 6th International Conference on Advanced Concepts in Mechanical Engineering (ACME 2014), June 12-13, 2014, Iasi, Romania.
The 104 papers are grouped as follows:
Chapter 1: Science of Materials and Processing Technologies,
Chapter 2: Design of Vehicles and Combustion Engines,
Chapter 3: Applied Thermodynamics and Heat Transfer, Renewable Energy, Engineering of Thermal Systems,
Chapter 4: Technologies and Machines in Agriculture and Food Processing,
Chapter 5: Applied Computational Methods in Design and Modeling,
Chapter 6: Engineering Management and Engineering Education
Les mer
Selected, peer reviewed papers from a collection of papers from the 6th International Conference on Advanced Concepts in Mechanical Engineering (ACME 2014), June 12-13, 2014, Iasi, Romania
- Preface and Committees
- Chapter 1: Science of Materials and Processing Technologies
- Micro-Alloying Influence on Hot Work Tool Steel Properties
- Wear Resistance and XRD Analyses of CMoCuNiCrSiBO Coatings Obtained by Thermal Deposition on OLC45 Substrate
- Wear Resistance and XRD Analyses of CNiCrSiBO Coatings Obtained by Thermal Deposition on OLC45 Substrate
- Evaluation of Mechanical Properties of Polyester Composite with Graphene and Graphite through Three-Point Bending Test
- Corrosion Behaviour of a Cermet Deposited Coating in Sulfuric Acid Solution
- A Study on Plastic Deformations due to Contact Fatigue Wear on a Cermet Coating Deposited by Thermal Spraying Methods
- Experimental Determination of the Yield Stress for Copper, Cu_99.75
- Silicon Influence on the Cast Iron Structure
- Influence of Cooling Rate on Metallographic Structure for Gray Iron, in the Case of Modification with a Mechanical Mixture of Al and FeSiCaMg
- FEM Simulation on Uniaxial Tension of Hyperelastic Elastomers
- Mathematical Modeling of the Relationship between the Surface Roughness and the Tool-Chip Interface Temperature in Turning
- Experimental Studies for Reducing Flux Consumptions in Atmospheric Controlled Brazing of Aluminum Alloys
- Comparative In Vitro Study on MgCa Si MgCaSi Alloys, as Biodegradable Implants
- White Cast Irons with Acoustic Properties
- Influence of the Degree of Cold Drawing over the Wear Test and XRD Analysis of Pipes Used for Dampers
- Considerations Concerning the Causes and Effects of the Occurrence of Residual Stresses in Metallic Materials: A Review
- Hybrid Particle/Fiber Polymer Based Composites Analysis Based on DMA Data vs. Material Property Predictions
- Some Considerations Concerning the Differential Scanning Calorimetry of Ultra Tough Plastic Materials
- Surface Generation by Material Removal in Manufacturing Processes from Machine Building
- Constitutive Parameters of Mechanical Behaviour Law for Poly (Ether-Ether-Ketone) Based Composites with Carbon Nanotubes and Carbon Fibres
- Chapter 2: Design of Vehicles and Combustion Engines
- Simulating the Torque and Angular Speed Distribution within a Heavy Vehicle’s Planetary Gearbox
- Using Neural Networks to Modeling Vehicle Dynamics
- A New Electric Drive System for a Disc Brake System Used in the Vehicle, Experimental Stand
- Experimental Study on the Influence of Certain Parameters over Vehicle’s Dynamic Behavior
- Vehicle Dynamics Study under Uncertainty
- Response Time to Sudden Changes in Speed and Load Regimes for Turbocharged Diesel Engine
- Aspects of Modeling and Optimizing Air Circulation Currents in a Car Cabin
- Simulation of the Free Piston’s Movement from the Single Regime Running Thermo-Hydraulic Generator
- Human Head-Neck System Behavior during Virtual Impact Automotive Simulations
- Theoretical and Experimental Researches Regarding the Use of Butanol at Diesel Engine
- Virtual High Speed Diesel Engine – A Simulated Experiment, Part I: Combustion Dynamics
- Virtual High Speed Diesel Engine – A Simulated Experiment, Part II: The Influence of Polytropic Exponent upon Combustion Product Formation
- Effects of Temperature Distribution on Operational Parameters of a Spark Ignition Engine
- Qualitative Estimation Criterion of Direct Injection Diesel Engines Performance Prediction for Stationary and Industrial Applications
- Experimental and Theoretical Aspects of Fuelling a Diesel Engine with Liquefied Petroleum Gases
- Researches Regarding the Use of Bioethanol at the Supercharged Spark Ignition Engine
- Safety against Derailment for Railway Vehicles
- COSRING-LUJET, Integrated New Concept in Automotive I.C. Engines for a Better Lubrication
- Researches on the Behavior of the Supporting Structure of Railway Traction Vehicles under the Effect of Shock Dynamic Forces
- Analyzing the Static Behavior of a Bogie Frame by Comparing Two Methods of Simulations
- A Theoretical Approach upon the Stiffness of Vehicle Resistance Structure Submitted to an Axial Impact
- Thermo-Chemical Recuperation as an Efficient Way of Engine's Waste Heat Recovery
- Experimental Determination of the Cinematic Misfit within the Transmission of a 4x4 Vehicle that Leads to Self-Generated Torque along the Vehicle’s Inter-Axle Driveline
- Self-Generated Torque Induced by the Lockable and Self-Locking Differentials within the 4WD Drivetrain
- Theoretical and Experimental Analysis on Use of Alternative Fuels for Internal Combustion Engines
- Chapter 3: Applied Thermodynamics and Heat Transfer, Renewable Energy, Engineering of Thermal Systems
- Straight Section Influence on Thermal and Hydraulic Performances for a Wavy Air Fin in a Compact Heat Exchanger
- Combined Cycle Units – An Alternative to Reciprocating Engines in Terrestrial Propulsion Field - Estimation of Performances
- Combined Cycle Units for Terrestrial Propulsion - Dimensional Approach
- Solid Fuels Behavior Revealed by Thermo-Gravimetric Analysis
- Research on the Processes of Gas-Air Mixtures Formation
- Experimental Study for Data Validation Regarding the Flow Movement in Natural Convection in an Asymmetrical Heated Vertical Channel
- Numerical Study Regarding the Flow Movement in Natural Convection in an Asymmetrical Heated Vertical Channel
- Theoretical and Experimental Research Regarding Operating Conditions of the Refrigeration Absorption/Adsorption Machines Using Solar Energy
- The Analysis of the Temperature Influence on the Processing Precision in Centerless Grinding Machines
- Wind Potential Analysis in Brasov Built Environment
- Analysis of the Efficiency of Ventilation Systems in Underground Garages
- Study Regarding the Wind Action on the Functioning of Chimneys
- A Study Regarding the Unsteady Heat Transfer and Phase Change
- The Advanced System for Conducting the Electric Furnaces for Heat Treatments
- Considerations about the Role and Efficiency of the Transceiver's Heat Sink during Critical Situations
- Active Pulse Thermography Applied to Defect Detection in Bioceramic Materials
- Gamma-Type Stirling Motor-Driven Compressor
- Physico-Mathematical Model of the Theoretical Gamma-Type Stirling Motor-Driven Compressor
- Finite Difference Approaches for One-Dimension Solid-Liquid Phase Change in Plane and Cylindrical Geometries
- Rapid Control Prototyping in the Development of Home Energy Management Systems
- Study of the Heat Transfer in a Heat Exchanger with Latent Heat Storage
- Numerical Study of Corrugation Amplitude Influence of a Wavy Fin in Overall Performance of a Compact Heat Exchanger
- Estimating Heating and Cooling Degree Days through an Urban Environment Using Publicly Available Sensors
- Improved Heat Transfer Using Micro-Structures in Trifold Solar Energy Conversion Systems
- Self-Sustained, Independent Trifold Solar Energy Conversion System for Isolated Locations in Hot Climate Areas
- Integrated System for Producing, Transporting and Consuming the Unconventional Energy for a Residential Building
- Production of Electricity in Photovoltaic Systems for Administrative Buildings in Romania, Technical and Economic Analysis
- Numerical Study of the Efficiency of Flat Plate Solar Collectors in Different External Conditions
- Experimental Investigation of Waste Heat Available for a Hybrid Micro-Cogeneration Group Involving a Diesel Engine Electric Generator and Organic Rankine Cycle
- Study of Height Influence of Heat Exchanger Tanks on Overall Pressure Drop
- Pressure Injection Influence on the Combustion Process
- Soot and NOx Modeling
- Considerations on Economic Optimization of the Relationship Insulation - Thermal Energy Sources Insurance for Civil Building
- Methodology for Analysis of Energy Efficiency for Residential Buildings Based on the Optimal Cost
- Hydrogen Production by Anaerobic Digestion of Biomass with High Lignocellulose Content - References Selection Procedure
- Ground Temperature Variation around the Horizontal Collectors of a Heat Pump
- Study of Ground – Water Heat Pump Parameters during 3 Years of Operation
- Results of the Numerical Simulation of the Entropy Flow Generated at the Fluid Flow with Friction and Heat Exchange
- Theoretical Analysis of the Entropy Flow Generated by the Fluid Flow with Friction and Heat Exchange
- Experimental Determination of the Heat Recovery Boiler Effectiveness of a Gas Turbine Plant
- Chapter 4: Technologies and Machines in Agriculture and Food Processing
- Influence of Hydrothermal Treatment on Wheat for Milling
- Study on the Dynamic Interaction between Agricultural Tractor and Trailer during Braking Using Lagrange Equation
- Studies and Research Concerning the Displacement of Solid Particle on an Oscillatory Flat Surface
- Researches Concerning the Cutting of Strains Plant with Cutting Devices from Romanian Combine Harvesters
- Losses Analysis of Materials Resulted from Shredding of Food Materials with Soft Texture by Means of Metal Wire Cutting
- Researches Regarding the Improvement of the Design for Vineyard Spraying Equipment
- Researches Regarding the Reliability of the Spraying Nozzles Used for Vineyard and Orchard Sprayers
- Chapter 5: Applied Computational Methods in Design and Modeling
- Numerical Methods and Descriptive Geometry Methods for Unfoldings Determination
- Generalization of Multispeed Gear Pitch Curves Design
- Technical Applications of the Descriptive Geometry and the Numerical Methods
- Nonlinear Oscillations of a Mass with Cubic Stiffness, Harmonic Excitation and Dry Friction
- The Generation of Conical Gears by a CAD Soft
- Chapter 6: Engineering Management and Engineering Education
- An Overview on Assistive Technology Training Courses for Salespersons
- New Applications for Mechatronic Platforms in Trans and Interdisciplinary Education
- Aspects Concerning New Trend in Management Control Systems Design and Implementation Strategy
- Modular Student Learning Kit for Internet of Things
- Cultural Influence in Engineering Education, Business and Economics in Terms of Multinational Approach
- Success Elements Analysis of International Engineering and Educational Projects
- Predict Air Pollution in Brasov City with Regression Models
Les mer
Produktdetaljer
ISBN
9783038352723
Publisert
2014-11-19
Utgiver
Trans Tech Publications Ltd
Vekt
1300 gr
Høyde
240 mm
Bredde
170 mm
Dybde
33 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
652