Advances in Materials and Processing Technologies XV
Heftet /
2014
/ Engelsk
Produktdetaljer
ISBN
9783037859216
Publisert
2014-02-05
Utgiver
Trans Tech Publications Ltd
Vekt
1730 gr
Høyde
240 mm
Bredde
170 mm
Dybde
47 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
946
Collection of selected, peer reviewed papers from the 15th International Conference on Advances in Materials and Processing Technologies (AMPT 2012), September 23-26, 2012, Wollongong, Australia.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 108 papers are grouped as follows:
Chapter 1: Computer Aided Engineering;
Chapter 2: Deformation Process;
Chapter 3: Materials;
Chapter 4: Materials Removal Processes;
Chapter 5: Processing of New and Advanced Materials;
Chapter 6: Surface Engineering;
Chapter 7: Precision Engineering;
Chapter 8: Welding;
Chapter 9: Other Related Processes.
Les mer
Selected, peer reviewed papers from the 15th International Conference on Advances in Materials and Processing Technologies (AMPT 2012), September 23-26, 2012, Wollongong, Australia
- Preface
- Chapter 1: Computer Aided Engineering
- The Numerical Simulations for the Shot Peening Process
- Effect of Material Properties on the Mechanical Performance of Nitinol Esophageal Stent: Finite Element Analysis
- Numerical Investigation of Knurled Shaft-Hub Connections and Especially of the Joining Process
- Analysis of Automated G-Clip Machine Processes and Substation Process with Simulation by Using CAD Software
- Chapter 2: Deformation Process
- Study on the Dynamic Recrystallization of Austenite in the Isothermal Compression of 300M Steel
- In Situ Detection of Forging Defects without Sensors in the Forging Tool
- Yield Strength of Hot Forging Die Steels at Working Temperatures
- Finite Element Analysis and Mold Design of Forging Process of Highway Bicycle Pedal
- Thin Strip Profile Control Capability of Roll Crossing and Shifting in Cold Rolling Mill
- Input Data Influence on FEM Simulation of Steam Turbine Blades Materials Hot Forming
- A Method to Optimize Aluminum Alloy Door Impact Beam Stamping Process Using NSGA-II
- Development of Piercing Technology for CVJ Cage with Thick and Uneven Piercing Holes
- Stress Evolution during Tensile Twinning in MgAZ31 Alloy Processed by Extrusion
- Forming Limit Curves and Forming Limit Stress Curves for Advanced High Strength Steels
- Effective Forming Processes of Hub Forging from Aluminum Alloy AlCu2SiMn
- Strain Induced Martensite in Incremental Forming - Formation, Effect and Control
- Optimization and Application of Process Parameters in an AZ61 Alloy Twin-Roll Strip Casting
- Taguchi Optimization of Process Parameters for Forming Time in Incremental Sheet Forming Process
- Experimental Studies and FEM Analysis on the Creep Age Forming for Aluminium Alloy 7050
- An Experimental Investigation of Edge Strain and Bow in Roll Forming a V-Section
- On the Influence of Mesh Size during Finite Element Simulation of Equal Channel Angular Pressing
- Grain Refinement in the Formability of Aluminium Thin Cup
- Investigation and Comparison of Heat Transfers Analysis Used in Commercial FEM for Metal Forming
- Effects of Lubrication in Ferrite Rolling of Interstitial Free Steel
- Chapter 3: Materials
- The Influence of Mechanical Mold Vibration on Temperature Distribution and Physical Properties of Al-11.8%Si Matrix Composites
- Comparison of Ironing in Warm and Hydromechanical Deep Drawing of Low Carbon Steel
- Mechanical Properties of Tin Tailing Sand-Clay Mixture from Batu Gajah, Perak, Malaysia for Making Greensand Casting Mould
- Effects of Hot Extrusion on Microstructure, Texture and Mechanical Properties of Mg-5Li-3Al-2Zn Alloy
- Influence of Filler Amount and Content on the Mechanical Performance of Joints Bonded with Metal Powder Filled Adhesive
- Evaluation of the Robustness of Surface Characterisation of Carbon Fibre Composites Using Wavelet Texture Analysis
- Performance of Solder Bond on Thermal Mismatch Stresses in Electronic Packaging Assembly
- Investigation on Failure Limit of the Perforated Sheet for Truss PCMs in Multiple Pin Stretch Forming
- Effect of Temperature on Mechanical Behaviour of High Manganese TWIP Steel
- Production of Mg-Based Bulk Metallic Glass Composites with High Magnesium Content
- Prediction of Ferrite-Martensite Dual-Phase Steels Mechanical Properties by Use of Artificial Neural Networks
- Microstructures and Mechanical Properties of Mg-6Li-6.5Gd-1Dy-2Zn Alloys
- Deformation Behaviour of a Commercial Pure Titanium Alloy during Hot Compression Testing
- Effect of the Bias Voltage on the Structure, Mechanical, Electronic and Optical Properties of the Low Temperature ZnO Thin Films Deposited by Using Cathodic Vacuum Arc Deposition System on Plastic Substrates
- A Misorientation Dependent Criterion of Crack Opening in FCC Single Crystal
- A Study on Grade 1000MPa High Performance Steel Plate Processing by Direct Quenching
- Development of a Composite Material from Agro Waste for Wear Resistance Application
- Niobium Containing Advanced High Strength Steels for Automotive Applications – Processing, Microstructure, and Properties
- Chapter 4: Materials Removal Processes
- Experimental Investigation on Surface Roughness and Tool Wear in Dry Machining of TiC Reinforced Aluminium LM6 Composite
- MCDM Model for Selection of Optimum Machining Process
- Development of Data Acquisition System for Examination of Grinding Performance
- Elementary Research on Preparation of AlB12 Powder by Self-Propagating High-Temperature Synthesis (SHS)
- Mechanism of Variable Helix Tools in Suppressing Chatter Using Process Damping for Machining Titanium Alloys at Low Cutting Speed
- Surface Roughness Analysis of Magnesium Pieces Obtained by Intermittent Turning
- Prototype Design of Wire-Sawing Machine for Preliminary Experiments to Lunar and Planetary Exploration
- Running Behavior of a High-Speed Spindle Using a Micro-Mist Lubrication System
- Tool Wear and Surface Roughness when Machining AlSi/AlN Metal Matrix Composite Using Uncoated Carbide Cutting Tool
- Design, Fabrication and Properties of Textured Self-Lubricated Tools in Dry Cutting
- Analytical Chatter Stability Prediction for Irregular Types of Milling Tools
- Chapter 5: Processing of New and Advanced Materials
- Optimization of Cutting Parameters for End Milling AlSi/AlN Metal Matrix Composite Using the Taguchi Method
- Machinability of Aluminum Nitride Ceramic Using TiAlN and TiN Coated Carbide Tool Insert
- Mechanical Properties of Highly Filled Iron-ABS Composites in Injection Molding for FDM Wire Filament
- Slurry Erosive Wear Behavior of Hot Extruded Al6061-Si3N4 Composite
- Fabrication of Bulk Metallic Glass Composites at Low Processing Temperatures
- Optimization of Glass Forming Ability of Al-Ni-Si Alloys by a Thermodynamic and Kinetic Approach
- A Highly Efficient Activated Carbon by Chemical Activation Method for Adsorption of Paraquat (Toxin)
- Modeling of the Behavior of an Aluminum Metallic Foam by Both FEM and Experimental Results
- Measuring the Mechanical Properties of Ground Ophthalmic Polymer Surfaces Using Nanoindentation
- Extrusion Printed Graphene/Polycaprolactone/Composites for Tissue Engineering
- Investigation of the Deformation Behaviour of a Thermoplastic Fibre Metal Laminate
- Influence of Element Types on Springback Prediction of Creep Age Forming of Aluminum Alloy Integral Panel
- Development and Application Practice of a 550MPa Grade Steel Plate in Purpose to Reduce Weight for Heavy Machinery Manufacture
- Fabrication of a Hybrid Aspheric Lens Using Glass and Thermosetting Polymer Molding Technique
- Processing of CuZr Based Shape Memory Alloys
- Effect of Copper on Tensile Strength Improvement of Al-Cu-SiCP New Composite
- Air Jet Erosion Wear Behavior of Al6061-SiC-Carbon Fibre Hybrid Composite
- Chapter 6: Surface Engineering
- Study on Functions of Chrome and Fluoride Ions in Plating Process of Tin Free Steel by Means of Cyclic Voltammetry
- Contact Analysis of Tooth Surface in Gear Meshing Based on Infrared Ray Imagery
- Laser Cladding of Stainless Steel Substrates with Stellite 6
- A Taguchi Design Study for Optimisation of Plasma Sprayed Hydroxyapatite Coatings
- Hydroxyapatite and Titanium Composite Coatings on Austenitic Stainless Steel Substrates Using Direct Material Deposition
- AFM and Ellipsometry Studies of Ultra Thin Ti Film Deposited on a Silicon Wafer
- Compaction Effect of Granular System with Parameters Changed
- Dynamic Characteristics of Machine-Pile-Soil Vibration System with Interface Friction Coupling
- Residual Stress Characterization of Electroformed Ni-Base Alloy for μ-Gear Mold
- Circular Cup Drawing of Magnesium Alloy Sheet under Cold Condition Using Rubber Tool and Improvement of Surface Appearance
- Cutting Performances of Coated PVD in High Speed End Milling of Aged Inconel 718
- On Generation of Micro-Feature on Silicon with an Industrial Laser
- The Effect of Molecular Structure on the Adsorption of PPO-PEO-PPO Triblock Copolymers on Solid Surfaces
- Tribological Performance of Aqueous Copolymers Solutions in Metallic Contact
- Influence of Vibration Time and Frequency on Surface Finishing Using Vibration-Assisted Micro-Forging
- Chapter 7: Precision Engineering
- Investigation of Characteristics of Ni-P-PTFE Coating on Optical Molds
- Elastic-Plastic Deformation of KDP Crystals under Nanoindentation
- Fabrication of a Micro Lens Array with a High Filling Factor Using a Direct Molding Method
- Chapter 8: Welding
- Intelligentized Technologies for Welding Manufacturing
- Effect of the Bonding Temperature on the Bonding Interface in the Press Bonding of Ti-17 Alloy
- Effects of Induction Heat Treatment on Austenitic Transformation, Microstructure and Mechanical Properties of Pipeline Steels
- A Smart System to Determine and Control for the Process Parameters in Pipeline Welding
- A Study on Welding Quality of Robotic Arc Welding Process Using Mahalanobis Distance Method
- Investigation on Spot Welding Effect on Truss Core Panel for Crashworthiness
- Effects of Laser Beam Energy on the Pulsed Nd:YAG Laser Welding of Thin Sheet Corrosion Resistant Materials
- Investigation on Effect of Solution-Stabilizing Post Heat Treatment on Microstructure of AISI321 Stainless Steel
- Mechanical Properties of the Heat Affected Zone of an X100 Grade Pipeline Steel
- Estimation of the Mechanical Properties and Temperature Distribution in Friction Stir Welding Technique of Aluminum Alloys
- Shape of Fusion Zone for the Welding Keyhole Induced by an Electron Beam
- Bondability of Dissimilar Metal Sheets by Shot Peening
- Chapter 9: Other Related Processes
- Rheological Properties of Cemented Tungsten Carbide Feedstock for Micro Powder Injection
- Thermal Parameter Affects on the Part Built Using 3D Printer Projet SD 3000
- Fatigue Analysis of a Motorcycle Frame System Based on a Road Test and the Finite Element Method
- A Study Wear Behaviour of Induction Hardened 4140 and Carburised 8617H Steels on 1040 Steel
- A Study on the Thermal Desorption Process of Oil-Contaminated Soil by Microwave
- Rheological Properties Analysis of WC-Co Injection Feedstock
- Applications of Squeeze Casting for Automobile Parts
- Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy and Particulate Reinforced Metal Matrix Composite
Les mer
Produktdetaljer
ISBN
9783037859216
Publisert
2014-02-05
Utgiver
Trans Tech Publications Ltd
Vekt
1730 gr
Høyde
240 mm
Bredde
170 mm
Dybde
47 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
946