Produktdetaljer
ISBN
9783038356646
Publisert
2015-12-27
Utgiver
Trans Tech Publications Ltd
Vekt
2100 gr
Høyde
240 mm
Bredde
170 mm
Dybde
62 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1249
Collection of selected, peer reviewed papers from the International Conference on Mechanical and Manufacturing Engineering (ICMME-2015), April 2-3, 2015, Kanchipuram, India.
The 210 papers are grouped as follows:
Chapter 1: Materials Engineering
Chapter 2: Technologies of Materials Processing in Manufacturing Engineering
Chapter 3: Fluids and Thermal Engineering
Chapter 4: Engines and Fuels
Chapter 5: Research and Design of Industrial Equipments and Machines
Chapter 6: Industrial Engineering
Les mer
Selected, peer reviewed papers from the International Conference on Mechanical and Manufacturing Engineering (ICMME-2015), April 2-3, 2015, Kanchipuram, India
- Preface & Committees
- Chapter 1: Materials Engineering
- A Short Review on Effect of Heat Treatment on Microstructure and Mechanical Properties of ADC12/SiC Metal Matrix Composite
- A Review on Composite Materials with Ferrous, CNT and Powder Metallurgy
- Characteristic Investigations on Loofah, Jute and Glass Fiber Reinforced Sandwich Polymeric Composites
- Degradation of Hybrid Metal Matrix Composites Reinforced with Boron Carbide and Graphite Particles due to Pit Corrosion
- Effect of Chemical Treatment on Mechanical Properties of Banana and Abaca Fiber Reinforced Composites
- Effect of Chitosan Particle Addition on the Tensile and Flexural Strength of Coir Fiber Reinforced Polyester Composites
- Effect of Equal Channel Angular Pressing on Microstructure and Mechanical Properties of As-Cast Al-B4C Composite
- Effect of Nano TiO2/Clay on the Erosive Wear Behavior of Basalt-Epoxy Hybrid Composites at Elevated Temperatures
- Evaluation of Lamina Properties and Fractographic Studies on Glass/Epoxy, Carbon/Epoxy and Kevlar/Epoxy Composites
- Evaluation of Mechanical Properties of Acacia-Jute-Sisal-Glassfibrereinforced Composite
- Fabrication and Mechanical Properties of Hybrid Natural Composite
- Influence of MoS2 on Microstructure and Mechanical Behaviours of Al6061-Al2O3 Hybrid Composite
- Influence of WC Particulate Reinforcement on the Mechanical Properties and Sliding Wear of Al6061 Alloys
- Mathematical Model Development to Predict Wear Rate of Al6061/TiCp Composites under Lubricant
- Mechanical Characterization of Low Cost Natural Fiber Particles Reinforced with Polymer Composites
- Mechanical Properties of Hot Extruded Al (Mg)-MnO2 Composites
- Mechanical Properties of Multi Axially Forged Hybrid Composite
- Optimization of Electroless Ni-P-Nano-TiO2 Coating Parameters Using Taguchi Method for Corrosion Performance
- Properties Investigations on Metallic Fiber Reinforced Sandwich Composites
- Structural Response and Remaining Life of Damaged Composites
- Study of Slurry Erosive Wear Behavior of Titania-30 Wt% Inconel-718 Plasma Sprayed Mild Steel Using Taguchi Technique
- Study on Mechanical Properties of Aluminium Based Metal Matrix Composites by Hybrid Reinforcement
- Synthesis of Metal Matrix Hybrid Composites and Evaluation of Mechanical and Tribological Properties
- Tensile Behaviour of Nanoparticle Reinforced Epoxy-Polyurethane Composite Water Pipeline
- Development of Corrosion Resistance Coating for AISI 410 Grade Steel
- Characterization of Hydroxyapatite Coated SS316L for Biomedical Application
- A Review on Defects in Carbon Nanotubes
- A Study of Corrosive Behavior of Al6061 Plasma Sprayed with Titania and Inconel 718
- Application of Sericin on Polyester Fabric
- Determination of Mechanical Properties on Aluminium with 5% Copper Powder Metallurgy Route Compacts through Equal Channel Angular Pressing
- Determination of Transformation Temperatures of SMAs by Varying the Force Using Dead Weight Method
- Effect of Alkali Treatment on Tensile and Physicochemical Characterization of Cissus quadrangularis Fiber
- Friction Force Behavior in Dry Sliding of Inconel 600 Alloy Using Taguchi Method and Regression Analysis
- Material Response Changes due to Varied Loadings in Three Composites
- Measurement of Hardness and Wear Properties of Al Alloy with Addition of Ni
- Mechanical and Morphological Studies of Al6061-Gr-SiC Hybrid Metal Matrix Composites
- Mechanical Properties and Corrosion Resistance of Friction Stir Welded Dissimilar Aluminum Alloys 2219 to 5083
- Mechanical Properties of Al2O3 Reinforced Cast and Hot Extruded Al Based Metal Matrix Composites
- Microstructure and Shape Memory Effect of Cu-Al-Be-Mn Quaternary Shape Memory Alloys
- Optimization of Dry Sliding Wear Parameters of MWCNT Reinforced Poly-Ether-Ether-Ketone (PEEK) Composites
- Structural Properties of Size Variation of Nanocrystallites
- Study on Mechanical Properties of Al 7075 Hybrid Metal Matrix Composites
- Synthesis and Characterisation of Multi Wall Carbon Nano Tubes (MWCNT) Reinforced Poly-Ether-Ether-Ketone (PEEK) Composites
- Synthesis and Characterization of Cu-Al-Be-Mn Quaternary Shape Memory Alloys Prepared by Induction Melting Technique
- Variation in Transformation Temperature and Shape Memory Effect in Cu-Al-Be Shape Memory Alloys with the Effect of Quaternary Elements
- Wear Behaviour of Polyurethane Coated Aerospace Aluminium Alloy (7075)
- Development and Analysis of Automotive Component Using Aluminium Alloy Nano Silicon Carbide Composite
- Microwave Characterization of Ecosand for Electromagnetic Interference (EMI) Shielded Construction
- Chapter 2: Technologies of Materials Processing in Manufacturing Engineering
- Effect of Geometries of Die/Blank Holder and Punch Radii in Angular Deep-Drawing Dies on DP Steel Formability
- A Review of Micro Hardness Measurement in Turning Operation
- Analysis of Tool Wear while Milling Hybrid Metal Matrix Composites
- Comparison of Optimum Cutting Parameters for AISI1042 in Turning Operation by Genetic Algorithm and Particle Swarm Optimization
- Determining the Effect of Process Control Parameters on Tool - Chip Interface Temperature during Hard Turning of AISI D3 Tool Steel in Dry Condition
- Effect of Cutting Parameters on Feed Force in Machining AISI 1018 Steel
- Effect of Powder Concentration in EDM Process with Powder-Mixed Dielectric (PMD-EDM)
- Electro Discharge Machining of WC/Ni Mixed Ceramic
- Evaluation of Cutting Force and Surface Roughness in Turning of GFRP Using Coated Carbide Insert
- Experimental Investigation and Analysis of Machining Parameters in Drilling of Fly Ash Filled Carbon Fibre Reinforced Composites
- Experimental Investigation and Parameter Optimization of Micro Holes Machining on Ti-6Al-4V Alloy
- Experimental Investigation of Soyabean Oil Based Cutting Fluid during Turning of Hardened AISI 4340 Steel with Minimal Fluid Application
- Finite Element Analysis and Experimental Investigation of Drilling of Titanium Alloy (Ti6Al4V)
- Improving Machinability in Conventional Turning of Ti-6Al-4V Using Work Piece Pre-Heating with Standard Cutting Tools
- Multiple Performance Optimization in WEDM Parameters Using Desirability Analysis
- Multiple Performance Optimization in WEDM Parameters Using Grey Relational Analysis
- Optimization and Prediction of Cutting Force and Surface Roughness in End Milling Process of AISI 304 Stainless Steel
- Optimization of Machining Parameters in Rotary EDM Process Using Copper Tungsten Electrode
- Optimization of Machining Parameters of Valve Steel SUH03 (X45CrSiMo10-2) Using Gray Based Taguchi Method
- Parameteric Optimization of Surface Roughness in End Milling of Aluminium Rock Dust Composite
- Performance Analysis of Cylindrical Grinding Process Parameters Using Grey Relational Technique
- Process Optimization of Electric Discharge Machining Using Response Surface Methodology
- Review of Composite Machining and Related Optimization Techniques
- Tool Wear Analysis in Turning Using Different Inserts and Different Lubrication Systems
- Comparative Study of Constant Current and Pulsed Current GTA-Welded Al-B4C Stir Cast Composite
- Comparison of ANN and Regression Modeling for Predicting the Responses of Friction Stir Welded Dissimilar AA5083-AA6063 Aluminum Alloys Joint
- Dissimilar Welding of SS 409 and Mild Steel by Gas Tungsten Arc Welding (TIG) Method by ER 309 L Electrodes
- Effect of Friction Stir Welding Process Parameters on Temperature Profile and Tensile Strength of Dissimilar Aluminum Alloys
- Effect of Friction Stir Welding Process Parameters on the Mechanical Properties of AA 6061 Aluminum Alloy Using Taguchi Orthogonal Technique
- Influence of Stick-Slip Effect on Gas Metal Arc Welding
- Multi Response Optimization of Process Parameters on AA8011 Friction Stir Welded Aluminium Alloys Using RSM Based GRA Coupled with DEA
- Multiple Performance Characteristics Optimization for AA8011 on Friction Stir Welding by RSM Based DEA
- Optimization of GMAW Parameters to Improve the Mechanical Properties
- Parameter Optimization for Friction Stir Welding AA1100
- Prediction of Weld Strength of PC-TIG Welded Al-8% SiC Metal Matrix Composite – An Empirical Model (EM) Approach
- Sensitivity Analysis for Process Parameters in Cladding of Austenitic Stainless Steel by Pulsed Metal Inert Gas Welding Process
- Studies on Mechanical Properties, Fracture Morphology and Corrosion Behavior of Pulsed MIG Welded AZ31B Magnesium Alloy Sheets
- Weld Properties of Low Carbon Steel Using Shielded Metal Arc Welding
- A Review on Optimization of Friction and Wear Parameters (Al Alloy-B4C) Composite Using Taguchi Technique
- An Approach on Fuzzy and Regression Modeling for Hard Milling Process
- Analysis of Surface Roughness in Drilling of Fly Ash Filled Carbon Fibre Reinforced Composites
- Studies on Parametric Optimization for Plasma Sprayed Fly Ash - Al2O3 Composite Coatings
- An Innovation into Reuse of Risers for Energy Conservation in Metal Casting
- Effect of Current and Deep Cryogenic Treated EDM Electrodes on Surface Roughness of AISI D3 Steel
- Examination on Surface Roughness in EDM of Aluminium 6061 Reinforced with 5% SiC Using Design Experiments
- Experimental and Numerical Study of Multi Hole Extrusion Process
- Experimental Investigations of Material Behaviour in Forward Micro Extrusion
- Investigation of Friction Using Non-Newtonian Lubricant Model in Hydrostatic Extrusion of Tungsten Alloy
- Neural Network Based Breakout Prediction System in Continuous Casting Shop
- Numerical Simulation of Al 6062 Alloy Deformation Behavior Using Equal Channel Angular Extrusion Process with Different Die Angles
- Optimization of Process Parameters in Hot Forging of Medium Carbon Micro-Alloyed Steel
- Performance Evaluation of Cryogenically Treated Tungsten Carbide Insert on Face Milling of Grey Cast Iron
- Performance Test of Cryogenically Treated and Coated Tungsten Carbide Cutting Inserts
- Process Optimization for Pore Defect in Casting – A Review
- Simulation of Shock Wave Assisted Free and Shape Forming of Metallic Plates in a Shock Tube
- Room Temperature Consolidation of Al and B4C Composite Powder by Equal Channel Angular Pressing
- Determination of the Effect of Nickel Content on Hardness, Optimum Aging Temperature and Aging Time for Spinodal Bronze Alloys Cast in Metal Mould
- Optimization of Process Parameters of Al-10% Cu Compacts through Powder Metallurgy
- Optimizing the Coating Parameters for Coated Aluminium Alloy 2024 T351 by Using Factor Analysis Method
- Parametric Optimization of Age Hardenable Aluminum Alloys Using TGRA Coupled with PCA
- Preparation and Characterization of Hybrid Aluminum Matrix Composites Reinforced with MWCNT Using Powder Metallurgy Process
- Effect of Nanoparticles in Reinforced Metal Matrix Composite on the Machinability Characteristics - A Review
- Springback Studies on Different Grades of Steel Sheets
- Swirling Fluidized Bed Polishing: A New Non-Conventional Method of Surface Modification
- Chapter 3: Fluids and Thermal Engineering
- A Very Efficient Class of HOC Schemes for the One-Dimensional Euler Equations of Gas Dynamics
- Analysis of the Fluid Flow in 3D Symmetric Enlarged Channel
- Analysis of Two Fluid Four-Channel Heat Exchanger Using Finite Element Method
- Coupled Field Transient Thermo - Structural Analysis of Inhibited Sintering Process
- Design and Development of V-Grooved Natural Convection Solar Air Heater for Odisha
- Effect of Geometrical Parameters on Flow Mal-Distribution in a Wavy Microchannel
- Effects of Heat Transfer, Magnetic Field and Space Porosity on Peristaltic Flow of a Newtonian Fluid in a Tapered Channel
- Enhancement of Heat Transfer of Rectangular Saw Tooth Shaped Micro Channel Heat Sink with Water Nano Fluid/Aluminium Oxide
- Enhancement of Productivity on Double Slope Single Basin Solar still by Flat Plate Collector and Sponge
- Enhancement of Thermo-Oxidative Stability of Vegetable Oil Based Lubricant via Chemical Modification Techniques
- Modeling and Simulation Assessment of Solar Photovoltaic/Thermal Hybrid Liquid System Using TRNSYS
- Numerical Analysis of Natural Convective Heat Transfer over a Vertical Cylinder Using External Fins
- Numerical Analysis on Hollow Cylindrical Pin Fins - Natural Convection
- Numerical Analysis on the Dynamic Behaviour of Fluidized Bed Reactor
- Numerical Investigation of Fluid Flow and Heat Transfer in Finned Micro-Channels with Nanofluids
- Numerical Investigation of Forced Convection Heat Transfer from Offset Square Cylinders Placed in a Three Dimensional Confined Channel
- Numerical Investigation on Visualizations of Confined Air Flow in a Slot Jet Inside a Rectangular Channel
- Numerical Modeling of Solar Radiation Heat Transfer for a Truck Cabin
- Numerical Investigation of Natural Convection in a Square Enclosure with a Baffle Mounted on Vertical Wall
- Numerical Study on Heat Transfer Enhancement in a Circular Dimpled Surface by Using Inline and Staggered Pattern at Laminar Flow Regimes
- Preheating Metal Scrap in Foundries Using Solar Thermal Energy
- Thermal Conductivity of Fabrics
- Transient Heat Transfer Solution Using Improved Lumped Model
- Waste Heat Recovery from Castings and Scrap Preheating by Recovered Heat Using an Intermediate Heat Transfer Medium
- Experimental Investigation of Heat Transfer in Coated Microchannels for MEMS Applications
- Review on Thermal Conductivity of Fabrics
- Thermo Mechanical Modeling of Selective Inhibition Sintered Thermoplastic Parts
- Chapter 4: Engines and Fuels
- An Experimental Study on Performance and Emissions of a CI Engine Fueled with Soybean Biodiesel with Antioxidant
- Automobile Emission Reduction with Wet-Scrubber Technology
- Biodiesel Production from Dairy Scum Oil by Using Heterogeneous Catalyst and its Performance Test on CI Engine
- Comparison of Physicochemical Properties of Simarouba Glauca, Dairy Scum and Karanja Biodiesel of Various Blends with Diesel
- Effect of Exhaust Gas Recirculation on Emissions of a Diesel Engine Fuelled with Castor Seed Biodiesel
- Effect of Mahua Biodiesel Blends on the Combustion Characteristics of Direct Injection CI Engine at Various Compression Ratios
- Experimental Studies on Diesel Engine with Piston Crown Modification Using an Optimum Alternative Fuel
- Experimental Study on Mahua Bio-Diesel – An Alternative Source of Green Energy
- Generation of Electricity from the Waste Heat of an IC Engine Using Thermo Electric Device
- Modeling the Spray Characteristics of Biodiesel
- Performance and Emissions Analysis of a Diesel Engine Using Various Bio-Fuels
- Performance of SI Engine to Improve the Combustion Characteristics by Using Methanol Blended Petrol
- Study on Rheological Characteristics and Molecular Interaction Properties of Annona Squamosa (Custard Apple) Seed Biodiesel
- Thermodynamic Modeling of Single Cylinder Direct Injection Compression Ignition Engine in Simulink
- Investigation and Analysis of Wear Reduction in Piston Rings through Coating
- Automation in Spillcut Marking
- A Conversion and Tribology Investigation on Used Ayurvedic Oil
- Chapter 5: Research and Design of Industrial Equipments and Machines
- Finite Element Analysis of Leaf Spring with Comparative Study Using Alternative Materials
- Finite Element Analysis of Active Magnetic Bearing with Different Leg Shapes
- Finite Element Model Development for Structural Integrity of Shafts with Circumferential and Arbitrary Oriented Cracks
- Modal Analysis of Annular Plate with Crack and its Effect on Natural Frequency
- Static and Dynamic Analysis of Motor Cycle Wheel Designs
- A Comparison of Porous Structures on the Performance of a Slider Bearing with Surface Roughness in Couple Stress Fluid Film Lubrication
- A Novel Walking-Aid for Paralytic Patients Caused due to Stroke
- Automobile Gearbox Fault Diagnosis Using Naive Bayes and Decision Tree Algorithm
- Brake Characteristics and Cooling Methods – A Review
- Comparative Analysis of Chosen Tolerance Stackup Methods and Development of an Improved Tolerance Analysis Method
- Controlling the Additives in Lubricating Oil to Minimize the Pitting Failure of Gear Teeth
- Design and Analysis of Commercial Automotive Vehicle Brake Pedal
- Design and Analysis of Electronic Controller Based Robot Arm
- Design and Development of Drainage Inspection and Anti-Clogging Robot
- Design and Fabrication of Rice Transplanter Adopting System of Rice Intensification (SRI) Technique
- Design for Combining Oil Seal and Bush Pressing
- Design of Two-Axis Automatic Sun Tracking System Assisted with Manual Control through LabVIEW
- Determination of Constant Orientation Workspace of a Stewart Platform by Geometrical Method
- Experimental Analysis of MR Fluid by Magneto-Rheological (MR) Damper
- Experimental Studies on Air Foil Thrust Bearing Load Capabilities Considering the Effect of Foil Configuration
- Health Monitoring of a Gear Box Using Vibration Signal Analysis
- Hydrodynamic Study of Bubbles in a Bubble Column Reactor Part I – Image Processing
- Hydrodynamic Study of Bubbles in a Bubble Column Reactor Part II – Numerical Study
- Modelling and Workspace Analysis of Parallel-Serial Hybrid Manipulator
- Multi Objective Design Optimization of Helical Gear Pair Using Adaptive Parameter Harmony Search Algorithm
- Numerical Study about Combined Effect of Distributed Initial Imperfections and Dent on Ultimate Strength of Square Plates under Uni-Axial Compression
- Study of Free Vibration Characteristics of Carbon Epoxy Based Composite Beams
- Workspace Analysis and Optimization of 3-RRR Planar Parallel Manipulator
- Computer Aided Stress and Deflection Analysis of Inspection Robot at Different Postures
- A Study on the Classification Ability of Decision Tree and Support Vector Machine in Gearbox Fault Detection
- Numerical Study on the Effect of Free Rotating Vaneless Diffuser of Exit Diameter to Inlet Diameter Ratio 1.3 with Speed Ratio 0.50 on Centrifugal Compressor Performance
- Design and Performance Prediction of Low Cost Vertical Axis Wind Turbine
- Analysis of Fluid Structure Interaction in High Pressure Elbow Pipe Connections
- Experimental Investigation of Composite Desiccant Wheel Dehumidifier
- Geometrically Nonlinear Analysis of Smart Sandwich Plates
- Improving the Mechanical Properties of the Propeller Shaft by Using Composite Materials
- Investigation of Engineering Properties of Paddy Grown in the Coastal Climate of Eastern India
- Acoustic Signature Based Weld Quality Monitoring for SMAW Process Using Data Mining Algorithms
- Cyclic Behaviour of High Performance Concrete Beams Strengthened with GFRP Sheets
- Marked Graph of Four Work Station Automated Manufacturing System and Sign Incidence Matrix
- Geotechnical Investigation, Field Load Test and Analysis of Full-Scale Bored Pile
- Chapter 6: Industrial Engineering
- Analytic Hierarchy Process to Select Environmentally Conscious Suppliers for Sustainable Supply Chain Management : A Case Study in a Public Sector Transport Corporation
- Application of Lean Six Sigma Tools for Reduction of Defects in Pump Manufacturing
- Employee Involvement and Management Commitment in Lean Implementation
- Factors Affecting Leadtime in Spinning Mills
- GEN-PRODIS Approach for Determining Total Cost in Disassembly Sequencing Problem
- Implementation of Lean Tools-Value Stream Mapping & SMED for Lead Time Reduction in Industrial Valve Manufacturing Company
- Knowledge Gap and its Impact on Product and Process Quality
- Minimizing Makespan in Job Shop Scheduling Problem Using Genetic Algorithm
- Multi-Objective Optimization Problems in Taguchi Parameter Design – A Literature Review
- Multi-Agent Based Disassembly Sequencing and Planning for End-of-Life Products
- Reduction of Rejections in Main Shaft Machining Operations
- Solving a Reverse Supply Chain TSP by Genetic Algorithm
- Supply Chain Performance Measurement: A Review and Reflection
Les mer
Produktdetaljer
ISBN
9783038356646
Publisert
2015-12-27
Utgiver
Trans Tech Publications Ltd
Vekt
2100 gr
Høyde
240 mm
Bredde
170 mm
Dybde
62 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1249