Automation Equipment and Systems

Chen, Wen Zhe Dai, Pin Qiang Chen, Yong Lu Se alle

Heftet / 2012 / Engelsk

Produktdetaljer

ISBN

9783037853696

Publisert

2012-03-28

Utgiver

Trans Tech Publications Ltd

Vekt

6300 gr

Høyde

240 mm

Bredde

170 mm

Dybde

168 mm

Aldersnivå

P, 06

Språk

Product language

Engelsk

Format

Product format

Heftet

Antall sider

3360

Redaktør

Automation Equipment and Systems

Chen, Wen Zhe Dai, Pin Qiang Chen, Yong Lu Se alle

Heftet / 2012 / Engelsk

Chen, Wen Zhe Dai, Pin Qiang Chen, Yong Lu Se alle

Heftet / 2012 / Engelsk

Nettpris:

8.939,-

Laveste pris siste 30 dager: 8.939,-

Levering 7-20 dager

Volume is indexed by Thomson Reuters CPCI-S (WoS).
The present volumes provide up-to-date, comprehensive and world-class state-of-the art knowledge concerning manufacturing science and engineering, focusing on Automation Equipment and Systems. The 633 peer-reviewed papers are grouped into 16 chapters: Material Section; Mechatronics; Industrial Robotics and Automation; Machine Vision; Sensor Technology; Measurement Control Technologies and Intelligent Systems; Transmission and Control of Fluids; Mechanical Control and Information Processing Technology; Embedded Systems; Advanced Forming Manufacturing and Equipment; NEMS/MEMS Technology and Equipment; Micro-Electronic Packaging Technology and Equipment; Advanced NC Techniques and Equipment; Power and Fluid Machinery; Energy Machinery and Equipment; Construction Machinery and Equipment.

Les mer

Selected, peer reviewed papers from the 3rd international Conference on Manufacturing Science and Engineering (ICMSE 2012), March 27-29, 2012, Xiamen, China

Preface and Sponsors & Committees
Chapter 1: Material Section
Analysis on Controlling Oil Pressure Regulating Performance of Hydro-Viscous Variable Speed Clutch
Application of the R-Function Theory for the Bending Problem of Shallow Spherical Shells with a Dodecagon Domain
Computational Experiments of Optimizing Transporting Robot Move Sequence in Molds Assembly Using Genetic Algorithm
A New Life Detection System: Integration of Ultra-Wide Band Sensor into Wireless Sensor Networks
CFD Studies on Velocity Distribution of Air in a Swirling Fluidized Bed
Design and Realization of Automatic Feed Proportioning System Based on PLC
Adaptive Internet-Based Online Courses Research
Biomechanics Simulation of Volleyball Player in Jumping Spike
A Two-Tiered Architecture of Wireless Sensor Network Using Multitier Protocols for Structural Health Monitoring
Bio-Polishing of Cotton Fabric with Cellulase
Cost Minimum Proportioning of Non-Slump Concrete Mix Using Genetic Algorithms
Application of Disaster Recovery Technology in Power Grid Dispatching Automation System
A Reusable Device Driver Framework for the Sensor Nodes in Internet of Things
Acceleration Compensating Fuzzy Control in Magnetic Suspension System
CNC Machining and Simulation for Relief of Special-Shaped Stone
Braking Cause Railway Passenger Cars Wheel Tread Scratches Reasons and Prevent
CFD Analysis of PWR Surge Line Subjected to Thermal Stratification
3D Detection and Reconstruction of Worn Parts for Flexible Remanufacture
Calcination Effects on Texture and Porosimetric Properties of Regular and Nano-Structured Alumina Utilized as Catalyst Support for the FT Synthesis
A Neural Network Method for Miniature Unmanned Helicopter Heading Control
Application of a New Heave Compensation System for Deepwater Hardware Installation
A Novel Retrieval Method Based on Semantic Motion
Coordinated Control of Speed during Driving Mode Switches for Parallel Hybrid Electric Vehicles
Design and Implementation of Manufacturing Execution System (MES) for Automobile Main Gear Reducer Assembly Line
A Synchronous Control Strategy for Independent Multi-Motor System Based on CMAC
Design and Analysis of a Two-Valve Control Hydraulic System for Controllable Pitch Propeller
Application of Wireless Communication in Road Intensity Detecting System
A Novel Motion Retrieval Method Based on Revised Matching Algorithm and High Dimensional Index
A Mathematic Model for Cyclic Scheduling in Robotic Cell of Molds Manufacture Processing Multiple Piece Types
Application of Networked Control in the Reservoir Gate Monitoring and Control System
A Study of Turbine Engine PID Control Method Based on Closed-Loop Gain Shaping Algorithm
Compatible Clustering Algorithm with Convex Space Partitioning
A Study of Genetic Algorithm Based on Niche Technique
A Design of Multifunctional Laser Aiming Probe
A New Test Part for Detecting Processing Accuracy of Five Axis CNC Machine Tools
Air Filtration and Pressure Boost Technique for the Operating Room of Construction Machinery
A Simulation Approach for Analyzing MAS Model of SIS
DCC Analysis of the Two Stock Market Returns by a Threshold Model: Empirical Study of the Stock Markets in Japan and Canada
A Novel Integration of GNSS and GIS Approach to Foundation Roller Compaction in Civil Engineering
3D Numerical Simulation of Hydraulics in an Oxidation Ditch
Application of GRNN to Plan Trajectory for a Picking Robot
Analysis on Affection and Dissemination of Road Traffic Accidents
An Image Enhancement Method Based on the Coal Mine Monitoring System
Analysis on Problems Shown in Safety Evaluation of China
A Single-Frame Based Approach to Measure Traffic Queue Length
A Rapid and Sensitive Acetone Gas Sensor Utilizing Thermal Desorption Coupled with Cataluminescence on Nano-Cr₄TiO₈
A Novel Force Sensor Based Multi-Function Take-Off Board
Accurately Counting Algorithm of Incremental Rotary Encoder
Control System Design of a Humanoid Robot Head
A Distributed Phase Time Optimization Method of the Coordinated Control for Active Bus Signal Priority
Coupling Model Analysis on Fluid Structure Interaction in Lifting Pipeling Based on ADINA
A Novel Current Reference Calculation Method for Shunt Active Power Filter under Nonideal Mains Voltages
Agricultural Information Service Evaluation System
A Study on RFID Anti-Collision Algorithm
Analysis of Hydropower Project Financing Risk TOT Mode Using the CIM – AHP Mode — Nansha Hydropower Station in Yunnan as an Example
Build Structure of Fractal Interorganizational Information Systems and Optimize Supply Chain Structure
An Advanced Vehicle Night Driving Assistance System Based on the DaVinci Platform
A Simple Method to Detect the Initial Position for Sensorless SRM
Design and Characterization of Single Beam for Latching Electrothermal Microswitch
Application of Remote Sensing on Monitoring of Forest Fire
Characterizations and Crystal Structure of Er Ions Doped Titania Nanofibers
A Sensor Data Query Method Based on Wavelet Synopsis
A Fast Forward Kinematics Algorithm for 3-PRS Parallel Mechanism
A Summary on Algorithm Research of Synchronous Generator Excitation Control
Contrast Source Inversion Algorithm Applied in 3-D Microwave Imaging
An Approach to Anatomic Contour Extraction of Vertebra CT Image Combining Contourlet Transform and PCNN
Analysis and Improvement of ZigBee Wireless Networks Route
An Anti-Swing and Positioning Controller for Overhead Cranes Based on Multi-Sliding Mode Method
Analysis for 3-D Seepage Field of Gravity Dam Foundation
An Innovative Design for High Performance Control Valve by Using the Synergy of QFD and TRIZ Methods
A Novel Transmit Diversity Technique for MIMO System
An Experimental and Numerical Investigation of the Performance and Dynamic Effects of a Shrouded Centrifugal Pump, Part 1
Assess the Effect of the Foot and Mouth Disease Type O Inactivated Vaccine (O/MYA98/BY/2010 Strain) for Pigs
Decision Analysis in Sustainable Product Development
Construction of Response Vectors in Yeast for Environmental Estrogen Bioassay
Applications of Interaction Design on the Website Interface Design
Analysis and Attack of Two Ring Signature Schemes
A Two-Stage Optimization System for the Plastic Injection Molding with Multiple Performance Characteristics
A New Dynamic Measurement for the Initial Prestress of Membrane Structure
Design and Experimental Study of a Vespiary Exsector
Accuracy Analysis of Centroid Detection Method Used to Star Sensor
A Delay-Dividing Approach for Stability of Neutral System with Mixed Delays
Comparative Investigations on Measurement Technologies of Metal Surface Residual Stress
A Method for Part Analysis and Selection in the Renewal Process of Product Family Architecture
Designing an Embedded Motion Controller Using a 16-Bit Microprocessor Motion Chip and ARM
A New Kind of Multiple Channels Data Acquisition Device & System Based on Sound Card
A Fast Multipole Boundary Element Method Based on Legendre Series for Three-Dimensional Potential Problems
A Multi-Platform Compatible and Open Software Architecture for Computer Numerical Control Systems
Application of PID Control Based on RBF Neural Network in Electro-Hydraulic Servo System for Steel Strip Deviation
Anti Trailing of ATM System Design
Analysis of Combination Mode about Vibration Mixer in Concrete Mixing Mechanics
Design and Analysis of Cards-Flipping Algorithm
Buildings on the Slope Considering Effects of Uneven Settlement of many Piles on the Structure Research
A Modified Finite Element Model for Electromagnetic Tube Compression Process
A Heuristic Algorithm for Single Veichle Route Problem with Multi Time Windows
Design and Development of a Test Platform for Performance of Variable Speed Control Switches in Power Tools
A Study on Dynamic Adjustment Behavior of Asset-Liability Ratio of Manufacturing Listed Companies in China
AL7N01 Butt Joint Welding Residual Stress Measurement by Ultrasonic Method
Agent-Based Simulation of Forest Firefighting
Case Study of Entrepreneurship and Family Business Succession on the View of Life Cycles
Application of Algorithm of Hidden Markov Model and High-Order Spectrum in Fault Diagnosis of Power Electronic Circuit
Based on Specific CNC Realize Automatic Integrated Controlling on All-Purpose Induction Quenching Equipment
Automobile Alarm System Based on Face Recognition Method
Calculation Method of Mechanical Face Seal Temperature Based on Heat Conduction Angle
An Improved Difference Method Based on Three Asymmetric Frames and its Applications in the Vehicle Detection
Adaptive Trajectory Tracking Control of Linear Ultrasonic Motor Based on Fuzzy Recurrent Neural Network
Based on the Network Connection LAN Trojan Detection System Design and Implementation
Automatic Conformance Test Generation for Protocols Specified in EFSM
Adaptive Terminal Sliding Mode Control of Opto-Electronic Stabilized Platform Based on Acceleration Feedback
A Self-Repairing Control for the Uncertain System of a Helicopter Using Adaptive Sliding Mode Technology
An Auto-Focus Algorithm of Fast Search Based on Combining Rough and Fine Adjustment
Application of SOM Network in Ship Pipeline Leakage Detecting
CoNb₂O₆ Ceramic with Geometric Frustration
Application of Digital Phase Sensitive Detection for Electromagnetic Propagation Logging while Drilling
An Efficient Method of Assembly Path Planning in Virtual Manufacturing System
Comparative Analysis on the Allowable Stress and Limit State Methods of Crane Structure Design Standards at Home and Abroad
Allelopathy and Preliminary Separation of Allelopathic Substance in the Extracts of Wheat Seed Germination
A Study of Analysis and Simulation of the Valve Ball’s Lapping Instrument with a Cup Shaped Cutter
140 GHz SIW Planar Antenna
Comprehensive Evaluation of Wind Turbine Type Selection Based on GA-SVR Model
Blind Image Separation Method Based on Artificial Bee Colony Algorithm
Based on Power Bond Graph’s Hydraulic System of Energy Release Research
Analysis on Oil Film Temperature Field of Hydro-Viscous Variable Speed Clutch
A New Method of Forward Index with Obtaining ID Automatically
A Novel Design of SOC Prediction for an Electrical Vehicle Based on the Intelligent Algorithm
Application of RBF Neural Network in WEDM
An Approach to Lumbar Vertebra CT Image Segmentation Using Contourlet Transform and ANNs
Automated Pedestrian Detection and Recognition Applied to Automatic Gate Machines in Urban Rail Transit
Application of Pre-Stack Inversion to a Complex Reservoir Prediction: a Case Study in LG34 Area, Tarim Basin
A Framework Design of Spatial Gamut Mapping
A SVM Model for Identifying Partial Discharge Based on TEV Data
A Numerical Analysis of Soil Arching in Piled Embankments
A Study of Flow-Induced Noise in the Volute of Centrifugal Pump Based on Sysnoise
Changes and Upgrading of Township Industrial District: the Comparison of Two Musical Instrument Manufacturing Industrial Districts
Based on Energy Recovery of Hydraulic System’s Calculation of Energy Consumption
Classifiers’ Environmental Friendly (Green) Re-Design
A Fatigue Life Analysis Method Based on Nominal Stress Method and MSC.FATIGUE Software
A Fuzzy Programming Model of Supplier Selection
Analysis of the Full Flow Field of Torque Converter
An Improved Immune Algorithm for Solving TSP Problem
Application of Fuzzy Clustering and FSM to Represent Graphic Concept Structures on Assessment Database
Based on Value Analysis Process Optimization of Air Cargo Transport
A New Method to Measure the Radial Flexibility of Ship Pressure Hull
An Adjustable Voltage Signal Filament Conversion Alarm System
Attitude Control of Flapping Wing Micro Aerial Vehicle Based on Double Fuzzy Sliding Mode Control
Design and Analysis of the Cam Profile for Rotary Piston Engine Based on High-Order Polynomial
Asymptotic Behavior of Solutions of Neutral Difference Equations Dealing with Mechanical Vibration Problems
Design and Application of Programmable Transient Pulse Generator
BP Neural Network Model for early Diagnosis of Kawasaki Disease
A Image Transmission System Based on Logistic Map
Application of Water Immersion Ultrasonic Phased Array Technology in Wheel Rim Inspection
Crack Damage Identification of Reinforced Concrete Simply Supported Beam Based on BP Neural Network
A Study on PID Control and Simulation Based on BP Neural Network
Design and Analysis of Surface Pressure Sensor for Colonoscopic Robot
An Improved Composite Grating for Phase Unwrapping in 3-D Measurement of Specular Objects
A Novel Sliding Mode Control Base on Synchronization Error for Parallel Robot
Adsorption Characters of 17α-Ethynyestradiol by Activated Carbon
A Coordination Method of Missile and Aircraft for Combat Use
Chapter 2: Mechatronics
An Effective Solution for Trademark Retrieval by Combining Pseudo Zernike Moments and SIFT Features
3D Simulation of Foundation Excavation in a Subway Station
An Impact Analysis of Corn Plant Spacing on Mechanical Harvesting
Design and Research on Key Components of a Novel Self-Propelled Chili Pepper Harvester
2D Simulation of Flow and Sludge Distribution in a Circular Secondary Clarifier
Analog Circuit Intelligent Fault Diagnosis Based on PCA and OAOSVM
Design and Experimental Research on the Sealing Structure of High-Pressure Gear Pump
Design of Monitoring the PV-Wind Power System Based on King View
Design the Information System of the Locating and Tracking Harbor Tug Based on the Web
Design of the Recognition and Decoding System of PDF417 Barcode Based on LabVIEW
Design and Research on Piezoelectric Acceleration Geophone
Design of Multi-Axis Motion Controlled System Based on SERCOS Bus
Design of Product Key Characteristics Management System
Design on Geographical Multi-Scale 3D Symbol Library
Design of Automatic Sorting System of Boxed Drugs Based on Profibus-DP
Design and Simulation of Bi-Directional Hydraulic Lock Used in Hydraulic System for Controllable Pitch Propeller
Design for a New Type of Powder Molding Equipment Based on Multibody Dynamics Simulation
Design of Data Acquisition and LED Display System
Design of Hydraulic Transmission Bicycle Based on Top-Down Method
Design of a Kind of Novel Limited-Angle Brushless Torque Motor
Design of Auto-Detection Instrument for Airborne Thermometer System
Design of Digital Controlled Signal Generator Based on DDS and MCU
Detection Technology of Roll Attitude Based on Geomagnetic Signals and Inertial Trajectory Study
Design for Low Power Loss HART Transducer
Designing and Simulation of a Multi-Direction Tiny Force Switch
Design of a Handheld Terminal which Has Encryption and Decryption Function
Design of Width Measuring Instrument for Needle Roller Bearing without Inner Ring
Design on Interferometric Sensor Demodulation System of OMAP-Based Asymmetrical 3x3 Coupler Output
Robust Fault Detection for Nonlinear Systems with Distributed Delays
Fingerprint Identification System Based on DSP
Experimental Study of Electrical Discharge Grinding Honeycomb Tori
Mitsubishi FA-Based Solar Photovoltaic Tracking Control System
On Integral Control Laws Improvement for Lengthways Pitch Angle Displacement System
Chapter 3: Industrial Robotics and Automation
Development of Pipe-Soil Interaction Experimental System for Steel Catenary Riser in Touchdown Zone
Study and Simulation for Optimization Plan of the Liquamatic Fire Water Cannon with Self-Swinging Device
Research on Pressure Feature of Airflow in Fuze Inlet Tube
The Study of Planar Five-Bar Parallel Robot Dynamic Characteristics
Track Handing Fusion in Data Fusion and Database
The Connecting Performance Analysis for a New High Speed and Precision Double-Contact Toolholder
Simulation Analysis of Tractor AMT Shifting Process Based on Fuzzy Optimization of Downshifting
Research on the Shape Distortions in Plastic Deformation Area for Narrow Plate Bending
Research on the Inlet Pressure Accurate Control Method of the Nozzle for the Single-Jet Nozzle Tester of Aero Engine
Study on Measurement Data Fusion of Mat Temperature Based on Weighted Least Square Algorithm
The Key Technology of PDP Lighting Inspection Machine
Visual Navigation of Four-Wheel Car Based on the Marking Line
Which Rust Deposition Model Should Be Used in Predicting Concrete Cover Cracking due to Reinforcement Corrosion?
Research on the Method of the Calibration of 3D Scanning Probe System Based on the Least Squares of Subsection-Variable Parameters
Study on Improving the Life of Stereolithography Injection Mold
Study on the Photocatalytic Properties of Nano-CdS Crack-Free Thin Films for Removal of Rhodamine B
Sintering Procedure of Calcium Hexaluminate Ceramics
The Mathematical Model and Simulation of Macrosegregation during Solidification Process of Super Heavy Steel Ingot
Study on the Regularity of the Natural Gamma-Rays Attenuation in the Slurry Water
Selection and Research about Mutational Ratio in the Test of Pipeline Section with Scattering Sensor
Super-Resolution Restoration for Image Based on Entropy Constraint and Projection onto Convex Set
Ductile Fracture Criteria Calibration and their Application
Study on Performance of PP/POE In Situ Compatibilization
The Simulation of a Novel Laser Indirect Shock Forming with SPH
The Engine Fault Diagnosis with RBFNN Based on AIC
Stability and Bifurcation Analysis of a Stage-Structured SIR Model with Time Delays
Development of a 3D Full-Field Monitoring System for Large-Scale Static Deformation Based on close Range Photogrammetry
The Preparation of Microcellular Foam PP Reflective Film
Risk Analysis of Robust Recursive Updating Model
Eddy Current Loss and Shielding Research of the Tank in Power Transformer
Warp Weave Texture Feature Recognition Based on Autocorrelation Function
Springback Analysis of TC4 Titanium Alloy Complex Part with Double Curvature under Single Point Incremental Forming Process
Thermal Test of a Sealed Air Cooling Local Environment Control Apparatus for Precision Instruments
Determination of m-Cresol and p-Cresol in Industrial Cresols by Raman Spectrometer
Wireless Real-Time Telemetry Automatic System for Monitoring the Settlement of Structure and its Application
Walking Speed Feature Extraction Based on Wavelet Packet Decomposition
Effect of Heat Treatment on Decay Resistance of Chinese Fir and Pine
Vibration Performance Optimization of the Semi-Active Suspension with Fuzzy Control Method
Development of a Practical Scanning Acoustic Microscopy
The Double-Bridge Beam Structure with Slots for Microaccelerometer
The Design of Control System of Camshaft Grinding Machine Based on FANUC 0i-TC
Sliding Mode Control of Electronic Throttle Valve Based on Rapid Control Prototyping
Research on Rapid Detection Technology for Irregular Surface Products
Simulation and Optimization of Power Train System of Light-Duty Passager Car Based on CRUISE
Two-Sensor Information Fusion with Out-of-Sequence Measurement
The Effect of Al₂O₃ Concentration on Properties of Ni-W-P-Al₂O₃ Electroless Composite Coating
The Limiting Performance Analysis of the Shock Isolation System
Study on Target Tracking Technology in Control of Robot Visual Servo
The Effect of Heat Treatment on Corrosion Resistance of Ni-W-P-Al₂O₃ Composite Coating
Working Pressure Effect on the Microstructure and Electric Resistivity of SiC Films Produced by MF Magnetron Sputtering
The Predicting Life of Automobile Gear by Dry Machining
The Research on the Electronic Supervision of Drug Distribution System Control
Study on Temperature Induced Head Skew Error for Hard Disk Drivers
Ultrasound Multipath Signature of Material Flaw Depth with Single Mono/bi-Static Measurement
Direct Orthogonal Marginal Fisher Analysis
The Optimization Design of the Mill Hydraulic Loading System
Study on Alkali-Oxygen Pulping of Bagasse Wet-Stored with Hypochlorite Bleaching Waste Water
The Mobile Robot Design Research Based on CNC Machine Group
Stiffness Analysis of 6-SPS Parallel Manipulator
Study on Dynamic Hybrid Position/Force Control of Two Coordinated Manipulators
Effect of Stretching Slenderization Treatment for Microstructure of Yak Hair
Weft Weave Texture Feature Recognition Based on Power Spectrum
Study on Enhancement Adsorption of Pipemidic Acid from Aqueous Solution by Using an Amino Group Modified Hypercrosslinked Polymeric Adsorbents
Synthesis of N-Butyl Acetate by Continuous Catalytic Distillation with Ionic Liquid [Hnmp]HSO₄
Self-Propagating High-Temperature Synthesis of TiB₂-Ti(C, N) Cermets Composite Powder
The Design and Experiment of Energy Saving Power-Assisted System of Portable Electric Tool
Study of Variation Equivalence in Machining Process
Thermal Response Analysis of Barrel of ISAW
The Study of Temperature Control Hydraulic Sensor
Study on the Automatic Emergency Shelter Device of Tire’s Bursting
Research on X-Band Weather Radar Network Based on Sensor Grid
Research on the FBG Automatic Testing and Controlling System Based on Virtual Instrument Technology
Study on the Test of Concrete Strength in Winter Construction by a New Technology: Noumenon Sampling Method
Research on the Cutting Heat and Wear of Indexable Inserts with Different Transition Surfaces
Vibration Control Effect Analysis on Tuned Mass Damper System Used in Urban Transportation
Value Engineering-Oriented Approach to Evaluating Conceptual Design Schemes of Sugarcane Harvester
The Research on Concrete Mix Design of Tailings Sand and Gravel
Development and Experimental Study of New Working Fluids for Moderate-High-Temperature Heat Pumps
Study on Milling Process Based on Finite Element Analysis
Theoretical Research of Measuring the Kinetic Energy for Swarm of Fragments with Six-Light-Screen Array
Development of Grinding and Cutting Scientific Data Sharing Platform
Schur Decomposition Model Reduction Algorithm of Discrete-Time Singular Dynamical Systems
Early Pleistocene Variability of SST Record by Foraminifera Shell Mg/Ca Ratio at IODP Site U1313,North Atlantic
Dynamic Behavior of Sandwich Beams with Different Cores
The Application of Virtual Reality Technology in Product Design
Study on Preparation and Properties of Precipitated Silica
Security Mechanisms Analysis for ZigBee Standard Based on AES-CCM*
Research on Velocity Hydrophone Suspension Dynamics
Study and Simulation of the Fluidization Quality of the Concrete Mixer Truck
Study on Catalytic Performance of Supported HPW/C Catalyst for Diethyl Adipate Synthesis
The Forecast of Demand Quantities of Emergency Commodities Based on Grey Interval Correlation Degree
Effect of Secondary Force on Rigidity of Oil Film of the Slipper Pair Based on Hydrostatic Support
The Study on Amended Method for the Measurement of Humidity with Microwave Cavity Sensor
Single Frame Infrared Image Targets Detection Based on Multi-Mixture Filters Model
The Determination of Dynamic Stiffness of Dish-Shaped Metal Corrugated Pipe by Use of Random Vibration Method
The Realization of SVPWM Based on LabVIEW
Research on Space Robot Shared Control System Based Augmented Virtual Reality
Research on the Lining Monitoring System of Mine Shaft in the Special Strata
Synchronization Control of Planar 2-Dof Robot with Redundant Actuation
The Target Motion Detection Algorithm Based on Gauss Mixture Model
Research on Performance Testing and Analysis System about Counter-Rotating Fan Based on LabVIEW
Development of the Kneading Mixer of Synthetic Diamond Electrolysis Residue and its Control Device
Research on the Relationship between the Characteristics of the Trustee and Trust in Construction Projects
The Influence of the Photovoltaic Effect on the Ferroelectric Properties of BaTiO₃ Thin Film
The Numerical Research on the Scramjet Combustion with Different Structure Cavity
Research on Novel Self-Spinning High Speed On/Off Valve Based on Fuzzy-Logic Parameter Self-Tuning PID Controller
The Design of Minibus Carpet Cleaning Machine
Simulation and Analysis on the Effect of the Antiroll-Bar on the Automobile Steady State Response
Research on the Embedded Coefficient in Compressive Stress
Surface Finish Study of Hard Milling 45 Steel with PCBN Tool
Study on the Nonlinear Vibration of Complex Rotor System under the Effect of Temperature Fields
The Fire Surveys Studies Based on the Fuzzy Clustering and the Neural Network
The Analyzing of the Relationship between Function and Form in Industrial Product Design Process Optimization
Distinction of Different Heat-Treated Skim Milk by RP-HPLC of their Whey Proteins
Distributed Measuring and Control System of Torque Rheometer
The Design of HTG Automatic Calibration System Based on Fuzzy Theory
Legal Analysis of Dispute Settlement Mechanism on Medical Emergencies
Impact Electrical Property of Alkali Metal Doped ZnO
Mobile Water Level Meter System
Mobile Robot Tracking Control Based on Lyapunov Method
Model Analysis of Analysis and Evaluation about NBA Match
Monitoring Leaf Nitrogen Concentration in Wheat Based on Spectral Parameters from HJ-CCD Data with Stepwise Regression Method
Multi-Parameter Monitoring System Design of Modern Facility Agriculture
Research on the Method of Continuous Scanning Measurement on the Tooth Surface of the Spiral Bevel Gear Based on the Constant Measuring Force
Dynamic Behaviour of a Novel Compliant MEMS Force Amplifier by MATLAB/SIMULINK
Chapter 4: Machine Vision
Embedded Capacitive Grid Sensing Technology for Torque Measurement
The Pressure-Continuously-Regulating Valve Based on NC Rotating
ELID Grinding Technology of Nano-Ceramic Scalpel
Study on the Structure and Factors of TOT Applied in Water Conservancy and Hydropower Project
Enrichment, Accumulation, and Potential Ecological Risk of Lead in the Sediments of Love River Mouth, Taiwan
Effects of Surfactants on the Characteristics of Y₂O₃ Dispersion Phase through Hydrothermal Synthesis
Empirical Analysis about the Relationship between Economic Growth and Financial Development: Evidence from China
Effects of Tin on Aluminum – Zinc Alloy as Sacrificial Anode to Protect Underground Oil Pipeline in Al-Mahawil Regional
Empirical Study on the Independent Director System' Effectiveness on the Corporate Performance of Listed Companies in Shenzhen Stock Exchange
Estimation of Wheat Chlorophyll Content Based on HJ Satellite CCD
Embedded System Based Target Tracking
Electronic Scale Automatic Calibration System with Image Identification
Evaluating the Performance of Training Algorithms in Active Noise Control Using MLP Neural Network
Employment Evaluation for University Student Based on Analytic Hierarchy Process
The Application of an SD Card in Debugging an Embedded System
Evaluation of Silicate Iron Slag as a Potential Methane Mitigating Method
Effects of Fat on Relationship between Particle Size and Physical Properties of Cross-Linking Yogurt by Purified Transglutaminase from Streptomyces mobaraensis DSM 40587
Effect of Ultra-High Pressure Treatment on Tenderness of Sea Bass
Evaluation Model for Urban Power Supply Systems
Effects of Gelcasting Parameters on the Solids Loading of Ti-6Al-4V
Establishment of Energy Consumption Model of Compressors
Optimal Deployment for Mobile Target Tracking in Sensor Networks
Chapter 5: Sensor Technology
FTIR/ATR Spectroscopy with Stability for Determination of HGB in Human Whole Blood
Fine-Grained Access Control Model Based on RBAC
False Color Composite System of Multi-Spectral RS Images Based on IDL
Finite Element Analysis for the Stiffness and the Buckling of Corrugated Tubes in Heat Exchanger
Fault Diagnosis Method Based on Embedded Acquisition Equipment and SVM
Experimental Investigation on Water Miscible Rolling Lubricant KD1
Finite Element Modeling of the Temperature Field during Grinding Processes
Flow Field Analysis of Pulse Converter Exhaust Manifold of Diesel Engines
Fabrication of Microfluidic Chip and Test of a Hydro-Focusing Based on Sheath Flow
Experimental Study of Influence Factors on Carbon Dioxide Corrosion
Fault Detection of Continuous Casting Process Using Kernel PCA
Study of the Control of Active Transfemoral Prosthesis Based on CPG
Forecasting the Exchange Rate Using the Improved SAPSO Neural Network
The Design and Implementation of a High-Speed Parallel AES Crypto-Chip
First-Principles Conductance Calculations of Ag-Al Co-Doped ZnO
Fuzzy Neural Network Hybrid Learning Control on AUV
Fluctuating Pressure Calculation during the Progress of Trip in Managed Pressure Drilling
Fault Diagnosis of Elevator Based AR Bi-Spectrum
Flow Field Analysis of Conducting Trunk of Comb-Type Cotton Picker
Fire Hazard Factors of Residential-Commercial Composite Buildings through Fire Hazard Cases
Fatigue Crack Growth of Ti-15V-3Cr-3Sn-3Al Alloy
Feature Selection Method Based on the Adaptive Genetic Algorithm-Kernel Partial Least Squares for High Dimensional Data
Evaluation of Zinc Contamination in the Sediments of Canon River Mouth, Taiwan
Field Determination of Surrounding Rock Strength under TBM Construction in Zhongtianshan Tunnel
Fast Mosaicking Panoramic Images with Parallax Scene from a PTZ Camera
Flow Field Numerical Simulation of Diesel Engine Working Process
Family Culture, Institution Environment and Entrepreneurship Orientation: a Case Study from China
Experimental Study of Large-Shell-Diameter Heat Exchangers with Small-Helix-Angles Non-Continuous Helical Baffles
Experimental Study on the Performance of a Natural Gas Engine
First-Principles Calculation of Carbides in Niobium Microalloyed Medium and High Carbon Steels
Experimental Investigation of the Flow Field of Gas-Liquid Slug
The Research on the Hydraulic-Control System for the Heave Compensation under the Deepwater Installation
Four Interacting Electrons in a Vertically Coupled Quantum Dots
Chapter 6: Measure Control Technologies and Intelligent Systems
Genetic Algorithm for Material Cost Minimization of External Strengthening System with Fiber Reinforced Polymer
Graphene Based Transparent Conductive Electrode
Intelligent Operation and Control of Refrigeration Craft in Cold Storage
Mechanical Properties of 5052 Al Alloy Processed by Groove Pressing
MEMS Technology in the Fabrication of Fluxgate Sensor with Micro-Solenoid Cores
Lateral Displacement Control Using Iterative Learning for Intermittent Web Transportation
Housing Decoration Lower Indoor Radon Concentration Survey
Heterogeneity Influence of Organic Matter on the Ozonation Chemiluminescence for Soils and Sediments
How Does the Stable Industry-University-Institute Alliance Promotes the Performance of the Inter-Organizational Knowledge Creation
Large Eddy Simulation of Hydraulic Characteristics of Flow around Two Parallel Circular Cylinders
Logistics Cost Control Research of FMCG Industry
Gateway Node Design of Underground Personnel Position System Based on Wireless Sensor Network
Influence of Internal Cavitating Flow of the Nozzle on Spray Characteristics in a Diesel Engine
Improving the Communication Performance in Multi-Agent Systems for Distributed Manufacturing Process Control
Huffman Tree Visualization
Heterogeneities Measurements of Crack Tip Deformation Fields in Random Short Spruce/PP Composites
Learning Visual Object Classifiers with only Positive Images
Measurement of the Depth Distance Based on the Binocular Stereo Vision
Independent Innovation Network Teaching Platform Research
The Design and Implementation of a Parallel Configurable Paseudorandom Sequence Generator
Limit Deformation Analysis of Rectangular Stiffened Plate to Near-Filed Explosions
Microcrystalline Silicon Thin Films and Triple-Junction Solar Cells
Micro-End-Milling Wear Automatic Inspection System Based on Effective Corner Detection Method
Loss and Gain of the Public Participation in Kunshan Master Plan
Mechanical Properties of Aged Cord-Rubber Composites
Method to Aid Modules Innovation by Patent Knowledge
Logistic Performance Evaluation of Squeeze Casting Equipments Based on Simulation
In Vitro and In Vivo Immunomodulatory Activities of an Acidic Polysaccharide from Gracilaria lemaneiformis
Integral Backstepping Control for a PMSLM Using Adaptive RNNUO
Lead Isotope Geochemistry of the Jilongshan Skarn-Host Au-Cu Deposit, Hubei Province, China
Low-Resolution Range Data Surface Matching for 3D Face Verification
Mechanism and Confirmation in Compact Spinning with Suction Groove
Integration of close Range Photogrammetry and Structured Light Scanner for Cultural Heritage Documentation
Integration of S-P Chart and OT for Cognition Diagnosis on Fundamental Mathematics
Green Synthesis of Semi-IPN Hydrogel-Silver Nanocomposites by a Biotemplate Redox Technique at Room Temperature
Investigation of Attack Angle Character for Hypersonic Inlet
The Significance and Implication of Control Object's Self-Balancing Applied in Turbine Governor Control
Improvement Measures and Evaluation of Energy Efficiency of Air Conditioning
Study on Plate Convex Contour Measurement System
MicroBlaze-Based Digital Controller for Switched Reluctance Motor Research and Implementation
Marking Certification of Adaptive Probability Packet Based on Hash Function
Local Fatigue Properties of Al-Zn-Mg Alloy Welded Joint
Heat Transfer Enhancement of Staggered Ribbed Backward Facing Step Flow with Inclined Impinging Jet
Mean Shift Segmentation Algorithm Based on Hybridized Bacterial Chemotaxis
Legal Practice Experience of early REDD Projects in Developing Countries and Enlightenment in China
Manufacture of Porous FeAl Intermetallics Produced by Mechanical Alloying and Sintering
Intelligent Control of Congestion Based on Multi-SoftMan
Heat Dissipation Design of High Power LED Headlamp
Investigation of Thermal Conductivity of Nanofluids Using Different Experimental Methodologies
Logistics Distribution Vehicle Routing Problem with Time Windows
Hemicelluloses Extraction of Bagasse and Bagasse Pith
Impurity Detection Using Machine Vision
Micro Flow Sensor Based on Frequency Measurement of Micro Whistles
Impressions of Mobile Operators on College Students
Chapter 7: Transmission and Control of Fluid
Parameter Optimization of High Pressure Water-Jet Target Detection
Preparation of Low Cost Ti-6Al-4V Alloy by Gelcasting
Study and Analysis on Pollution of Coal Washing and Separating Project
Neighborhood Analysis-Based Calculation and Analysis of Multi-Scales Relief Amplitude
Modification of Aminosilicone Oil with Long Side-Chain and its Application on Fabric Finishing
Modeling and Simulation of Electro-Hydraulic Proportional Position Control System with the Flexible Hose
Multi-Level Block Information Extraction in Engineering Drawings Based on Depth-First Algorithm
Modal Analysis of Flip Chip for Solder Bump Defect Detection
Microstructure of MoSi₂ Coating with B Addition Prepared by Vacuum Cladding
Multi-Level Blended Learning Exploration and Practice on Experimental Teaching System
Multi-Loop Network Power Grid Monitor Based on the Embedded Operating System
Microstructures and Mechanical Properties of AZ61 Mg Alloy Processed by Equal Channel Angular Pressing
Network Environment and Innovative Learning Research
Moisture Comfort Property of Fine Denier Polypropylene Fiber in Different Environmental Temperature Conditions
Nano-AAO-Based Microsensor for Monitoring Process Carbon Monoxide
Modeling Method of Assembled Structure Coupling the Characteristics of the Joints
Theoretical Analysis and Experimental Research on Emergency Release Devices of Loading Arm
Multi-Temporal Analysis of Urbanization in Mountain Environment: a Case Study of Chongqing, China
Survey of Remote Handing for Hot Cell Equipment
Model of Closed-Loop Detection System for Capacitive MEMS Accelerometer and its IC Realization
Using Multi-Buffer Mode to Improve Performance of Encryption Card
Chapter 8: Mechanical Control and Information Processing Technology
Application of Precipitated Silica in Print Coated Paper Coating
Position Sensorless Control System of SRM Based on Improved BP Neural Network
Observation of Dislocations Configuration of TiAl Alloy during Fatigue Tests at Elevated Temperatures
Numerical Simulation of 2D Circular Dam-Break Flows with WENO Schemes
Research on the Application of DPSK Technology in OFDM Doppler Receiver
Numerical Simulation of Mixing Performance of Intermeshing Co-Rotating Tri-Screw and Twin-Screw Extruders
Nonlinear Relation between Inflation and Economic Growth: Evidence from China
Research on Plasticity Shaped Technology of Gear for New Type Agricultural Vehicles
On Game Behavior of the Inventory Pledge Banks and the Logistical Enterprises
Normalized Coupling Method for Multi Shafts Speed Synchronization
Numerical Simulation and Experiment Research on Pressure Fluctuation and Aerodynamic Noise Field of a Multi-Blade Centrifugal Fan
Numerical Simulation Research on Vortex Characteristics of Centrifugal Pump Inlet Recirculation
Optimal Control for Tractor Automatic Transmission Shift Process
Numerical Simulation Research on the Shape of Top Coal Drawn-Body in Gently Inclined Seam
Numerical Simulation and Experiment Research of the Whole Flow Field inside a Multi-Blade Centrifugal Fan
Numerical Simulation of Gas Exchange Process in Two Stroke Reverse-Loop Scavenging Engines
Non-Oscillation in Linear Delay Differential Systems
Optical 3D Scanning of Small Parts
Numerical Solution on Flow Property of a Shear-Thinning Gel Propellant in a 90⁰ Pipe Bend
The Research of Round Raster Readheads Scheme
Numerical Analysis of Super Drill of Shaft Well Boring Machine in the Stress Field
Network Publishing on Editorial Activities
Novel Acoustic Source Localization Method in WSN Based on LSSVR Regression Modeling
Numerical Analysis of Radial Groove Gas-Lubricated Face Seals at Slow Speed Condition
Numerical Simulation of High Speed Machining of Alloy Cast Iron
Numerical Simulation on Aerodynamically Generated Injection Nozzle Noise
Non-Oscillatory Solutions of Odd-Dimensional System of Functional Differential Equations
Numerical Simulation Analysis of Heat and Mass Transfer during Drying of Jujubes
Chapter 9: Embedded System
Study of Water Freezing and Thawing Process inside the PEMFC Stacks during Cold Start
Research on the Performance Measurement of High School Leadership Training Camps
Supply Chain Partner Relationships Classification: an Empirical Study on LEG Model
Weed Image Edge Detection Based on Order Morphology Transformation
Optimization and Realization of Target Tracking Algorithm Based on Embedded System
Optimal Design of a Non-Overload Centrifugal Pump
Optimization Research on Spares Supply for some Equipment Based on Fuzzy Comprehensive Evaluation
Optimal Design of Cobalt Crust Cutting Head Structure Parameter Based on Genetic Algorithm
Optimization Design of the Thread Joint in Gelin Column of Die Casting Machinery Based on FEM Analysis
Study on Ion Concentration of New Type Transverse Plate ESP
Study on Hydro-Geochemical Action during Seawater Intrusion
The Comprehensive Evaluation of UIG Regional Cooperative Innovation Effect Based on Sustainable Development
Research on Modeling of Compressor Characteristics for Sichuan-East Gas Transmission Pipeline Project
Optimization of Cooling Parameters in Casting Processes Based on Adaptive Evolutionary Particle Swarm Algorithm
Optimal Efficiency Shift Schedule of Automatic Transmission for Construction Vehicle
The Supportive Role of Information Technology on the Subject Teaching
The Finite Element Analysis of Asphalt Pavement with Function Layer under Temperature-Load Action
The Numerical Calculation on the Effective Area of Photonic Crystal Fiber Using FEM
Optimization of Ultrasonic-Assisted Extraction of Flavonols and Anthocyanins from Blueberry Using RSM
Chapter 10: Advanced Forming Manufacturing and Equipment
Three-Dimensional Seepage Analysis and Seepage Control System Optimization of a Hydropower Project
Study on BAF Lipid Phosphorus Biomass and SOUR Active Tests
Panoramic Image Browser Design Based on Cylindrical Surface
Organically and Silylation of Synthesis Nano- Clay-Magadiite
Optimized Utilization of Station Arrival and Departure Tracks for Passenger Dedicated Lines
The Design of DDR-SDRAM Controller Based on Spartan3
Parallel Study of Integrated Test in Software Testing Process
The Quadratic Trigonometric B-Spline Curve with a Shape Parameter
Zircon Geochronology of Granodiorite Porphyry in Yaojialing Mine, Anhui Province, and its Geological Implications
Study on Image Retrieval Method Based on Color and Location
Synthesis and Inhibition Performance of Two Imidazoline Corrosion Inhibitors with Different Hydrophilic Groups
The Integrated Testing System for Performance Parameters of the Hydraulic Excavator
Parametric Optimization of Micro Drilling Using Machine Vision Technique Combined with Taguchi Method
The Finite Element Analysis of CLAC Beam
Semi-Physical Simulation Experiment System of Fuel Control System for an Aeroengine
Research on the Sports Development in China's Ethnic Minority Region
Outlier Detection for Soft-Sensor Modeling Data Based on k-Nearest Neighbor
Chapter 11: NEMS/MEMS Technology and Equipment
Performance Evaluation of the Upside Air-Supply Bottom-Side Air-Return Air Distribution Mode
The Finite Element Analysis of Plate's Distance on Push-Extend Multi-under-Reamed Pile
Study on Rockmass Deterioration Model Based on the Unified Strength Theory
Parse Mechanism of Manufacturing Information Needs Based on Workflow Context
The Research of Dalvik Virtual Machine on the Andriod Platform
Preparation and Properties of Chrome Tanning Agent from Chrome Sludge
The Research of Performance Test System of Seals in Hydraulic Support Column
Particle Swarm Improvement Optimization Algorithm and Performance Study
Particle Swarm Optimization with Negative Gradient
Patent Management in China’s Electronic Information Industry: Comments and Suggestions
Risk Analysis of BOT Finance Mode on Hydropower Projects Based on Analytic Hierarchy Process – Case Study of Xi He Hydropower Station in Anhui Province
Performance Optimization Based on Genetic Algorithm of Double Suction Centrifugal Pump
Study on the Performance Simulation of a Kind of Height-Adjusting Shock Absorber
Study on Calculation Method of Two-Part Heat Price
Temporary Supporting Role of Micro Steel Pipe Piles in Landslide Emergency Treatment
Preparation and Characterization of Macromeritic Tungsten Powder Reduced by Ammonium Paratungstate at Medium Temperature
Two-Stage Evaluation of Life Insurance Industry in Taiwan Using Data Envelopment Analysis
The Design to Achieve the Data Breakpoint Survivor by Using FPGA
Performance Comparison of Two Network Coding Modulation Scheme in Multiple Access Relay Cooperation
Chapter 12: Micro-Electronic Packaging Technology and Equipment
The Finite Element Model Improvement on Shear Behavior of RC Frame Columns under Lateral Bevel Load
The Track Motion Control of the Flying Shear Based on Quintic Spline Curve
The Influence of Supersonic Combustion when the Cavity Parameters Changed on the Chamber Wall
Workover Simulator Training Development
Study on CNC Machining Method of EDM Copper Electrode
Research on Plasticity Shaped Technology of Rear Axle Gear of Motorcar
Study on the Effect of Rice-Frog System on Controlling Agricultural Non-Point Source Pollution
Risk Analysis on Investment of Hydropower Project Based on WBS and RBS
Research on Operation Monitoring System of Regional Logistics System
Research on Technology of Variable Spindle Speed Noncircular Turning
Tension and Shearing Characteristics of Magneto Rheological Fluid under Magnetic Fields
Research on Workshop Management System of Body-in-White Pressing Production
Two-Dimensional Orthogonal Grid Generation
Research on Reuse-Oriented Intellectual Development Method for CNC Human-Machine Interface
The Two-Wheeled Self-Balancing Mobile Robot Based on MEMS
The Development of Projects under the Clean Development Mechanism in China
Preparation of Tens of Micrometers Sized Polystyrene Spheres
The Research of Motion Detection and Shadow Elimination in Video Surveillance
Study on City Hydrology Ecosystem System Influence Suffered from the Urbanization
Research on Preparation Method and Etching Technique of Large Scale Free P+ Diaphragm
Chapter 13: Advanced NC Techniques and Equipment
Product Lifecycle Oriented Quality Design System into Supply Chain
Properties for Certain System of Linear Delay Functional Differential Equations
Properties for Solutions of Differential Equations with Variable Delay on Time Scales
Texture Segmentation of Jacquard Fabric Using Wavelet-Domain Markov Model
The Research of Radar Signal Interface Technology Based on LVDS
The Diversities and Unities of Thermodynamic Function Expressions for Simple Systems
Punching Process and Technical Equipment of High-Density Sub-Mesh Plate
Study on the Production and Properties of Mulberry Fiber
Probabilistic Access Based Call Admission Control in Multi-Traffic CDMA System
Vehicle Path Planning Method Based on Particle Swarm Optimization Algorithm
Research on the Division for Functional Area of Evaluation of Intensive Use Based on Delaunay Triangulation and GIS – A Case of Functional Area for Residence in Qingyang
Pull-in Instability Behaviour of Nanoscale Actuators Using Nonlocal Elasticity Theory
Seismic Studies for Gas Hydrate Characterization in a Marine Case
Study on Construction of Close-to-Nature Man-Made Plant Landscape Based on Natural Plant Communities: the Case of West Lake Scenic Area in Hangzhou
The Impact of Different Temperatures Pre-Steaming Treatment on European Beech
Chapter 14: Power and Fluid Machinery
Research on the Inclusion Complex of Astaxanthin
Reactive Divided Wall Distillation Column: Simulation and Experiment of Methyl Acetate Hydrolysis
Research of Response Characteristics of Elastic Wave Field in Two-Phase Media of Coal Rock
Research and Implementation of Virtual Assembly Motion Guided by Assembly Force
Research of Frame Optimization Technology Based on SIMP
The Impacts of CG Technology on Architectural Designs in Animated Films of the U.S.A.
Study on Cross-Cultural Communication and Cooperative Learning in Web Environment
Research for the Risk Structure of Large Design Enterprise’s Projects Based on Hard System Methodology
Research of Core Characteristics of Search Coil Magnetometer
Quantitative Analysis on the Orthogonal Fluxgate
Research of Low Temperature Si/Si Direct Bonding Wafers with Different Pretreatments
Registration Algorithm of Time and Sensor System Errors for Multi-Platform
Research of Inverted Index Method Based on Block Organizing Technology
Rapid Determination of Organic Matter Fractions by Ozonation Chemiluminescence
Research of Flash Automatic Marking Based on Logical Formal
The Research of Wireless Low Power Transmission System Based on Magnetic Resonant Coupling
The Empirical Identification and Analysis of Key Risk Factors of Inventory Financing
VHDL Finite State Machine Based Elevator Controller
Research of Composite Material Properties Based on Waste Glass and Scrap Aluminum
Research and Application of Full-Length Grouted Anchor in Roadway under Mining Face
Research of Information Extraction from SQL Server Based on SQL-DMO
Removal of Some Heavy Metals by Electrocoagulation
Research of Permanent Magnet Synchronous Motor Speed Control System Based on DSP
Research and Development of a New Laboratory Mill
Research of the Open CNC System Based on PC and Programmable Multi Axes Controller
Real-Time Virtual Instrument Platform Based on Multi-Thread Technique
The Application of Image Security to Electronic Commerce
Trigger Circuit Design for Series SCRs Valve Bank
Recognition and Classification of Human Activity by Posture Sensing and Machine Learning
Research of SCARA Robot Based on Fuzzy_PID Hybrid Control
Research of High Voltage Transmission Line Monitoring System Based on GPRS and ZIGBEE
Separation of Antihypertensive Peptides Derived from Soybean Protein Isolated with Ultrafiltration Technology
Quantitative Ultrasonic Evaluation of Surface-Breaking Crack Height Based on Neural Network
Pupil Detection in Facial Images with Using Bag of Pixels
Chapter 15: Energy Machinery and Equipment
Research on Development Strategy of Sustainable Utilization of Water Resources in Northwest Hebei – Development Strategy of Sustainable Utilization of Water Resources and Vegetable Industry
Water Environmental Quality Evaluation Based on Visualize Classification for Huangbizhuang Reservoir of South-North Water Transfer Project
Research on Evaluation System of Urban Ecological Safety
The Empirical Research of the Effect about Communication Trust and Commitment on Supply Chain Cooperation
Research on Efficiency of Physical Capital and Human Capital in China's Economic Growth
The Method Based on the Reuse in Virtual Scene Modeling
Research on the Mathematical Models for Refractory Castable Corrosion by Molten Slag
Research on an Unmanned Automatic SMS Alarm System for Cooling Tower Fan
Research on Abnormal Car-Following Behavior of Multi-Lane
Research on Emissions of Benzene & Polycyclic Aromatic Hydrocarbons in Constant Volume Combustion Bomb
Speech Evaluation System Based on MFCC
Research on Automobile Transmission Comprehensive Performance Test Experiment Equipment
Study on Thermal Analysis of Dome in LAMOST
The Application Practice of Geography Information Technology in Popular Science Area
Research on Consumer Credit Assessment of Power Enterprises Based on FAHP
Research on Automatic Balance Control of Self-Elevating Offshore Wind Turbine Installation Vessel
Research of the Re-Manufacturing Model and Information System Design Based on Supply Chain Management
Research on Educational Resources Sharing Based on Internet of Things
Chapter 16: Construction Machinery and Equipment
Research on Identification Technology for Weak Signals’ Development Trends of Crop Leaves’ Water Potential Based on Wavelet Theory
The Method of Character Recognition Based on Projection Transformation Combined with LS-SVM
Research on the Movement Effect of Coal Group’s Industrial Structure
The Study of Purifying Coumarin Chemical Compounds in “Yubaizhi” Angelica Dahurica by Macro-Porous Absorption Resin
WBS-RBS-Based Hydropower Projects Investment Risk Analysis
Research on High Precision Time Information Transmission Method
Study on Flight Command and Training Simulation System about Aircraft
The Exploratory Study and Research in Network Environment
Research on Forecasting the Research Costs of Applying Cost-Time Cumulative Curve to the Military Container Roll In/Out Platform
Research on Information Technology and Equipment for Vegetable Quality Safety Supervision
Research on International Standards of Gas and Material Compatibility in Cryogenic Vessels
Research on Microcomputer Control System for Spherical Surface Grinder of Engine Valve Tappet
Research on Loss and Temperature Rise of a Novel Dynamic Electromagnetic Induction Heater
Study and Selection of Working Fluids for Organic Rankine Cycle (ORC) Using Engine Waste Heat Energy
Stresses of Existing Pavement Induced by Widened Embankment over Soft Soils
The Calibration System of Gas Flow Meter Based on Standard Flow Meter Method
Study on Ultrasonic P-Scan Imaging Technology for Rotary Parts Used in Coal Mine Machinery

Les mer

Selected, peer reviewed papers from the 3rd international Conference on Manufacturing Science and Engineering (ICMSE 2012), March 27-29, 2012, Xiamen, China

Preface and Sponsors & Committees
Chapter 1: Material Section
Analysis on Controlling Oil Pressure Regulating Performance of Hydro-Viscous Variable Speed Clutch
Application of the R-Function Theory for the Bending Problem of Shallow Spherical Shells with a Dodecagon Domain
Computational Experiments of Optimizing Transporting Robot Move Sequence in Molds Assembly Using Genetic Algorithm
A New Life Detection System: Integration of Ultra-Wide Band Sensor into Wireless Sensor Networks
CFD Studies on Velocity Distribution of Air in a Swirling Fluidized Bed
Design and Realization of Automatic Feed Proportioning System Based on PLC
Adaptive Internet-Based Online Courses Research
Biomechanics Simulation of Volleyball Player in Jumping Spike
A Two-Tiered Architecture of Wireless Sensor Network Using Multitier Protocols for Structural Health Monitoring
Bio-Polishing of Cotton Fabric with Cellulase
Cost Minimum Proportioning of Non-Slump Concrete Mix Using Genetic Algorithms
Application of Disaster Recovery Technology in Power Grid Dispatching Automation System
A Reusable Device Driver Framework for the Sensor Nodes in Internet of Things
Acceleration Compensating Fuzzy Control in Magnetic Suspension System
CNC Machining and Simulation for Relief of Special-Shaped Stone
Braking Cause Railway Passenger Cars Wheel Tread Scratches Reasons and Prevent
CFD Analysis of PWR Surge Line Subjected to Thermal Stratification
3D Detection and Reconstruction of Worn Parts for Flexible Remanufacture
Calcination Effects on Texture and Porosimetric Properties of Regular and Nano-Structured Alumina Utilized as Catalyst Support for the FT Synthesis
A Neural Network Method for Miniature Unmanned Helicopter Heading Control
Application of a New Heave Compensation System for Deepwater Hardware Installation
A Novel Retrieval Method Based on Semantic Motion
Coordinated Control of Speed during Driving Mode Switches for Parallel Hybrid Electric Vehicles
Design and Implementation of Manufacturing Execution System (MES) for Automobile Main Gear Reducer Assembly Line
A Synchronous Control Strategy for Independent Multi-Motor System Based on CMAC
Design and Analysis of a Two-Valve Control Hydraulic System for Controllable Pitch Propeller
Application of Wireless Communication in Road Intensity Detecting System
A Novel Motion Retrieval Method Based on Revised Matching Algorithm and High Dimensional Index
A Mathematic Model for Cyclic Scheduling in Robotic Cell of Molds Manufacture Processing Multiple Piece Types
Application of Networked Control in the Reservoir Gate Monitoring and Control System
A Study of Turbine Engine PID Control Method Based on Closed-Loop Gain Shaping Algorithm
Compatible Clustering Algorithm with Convex Space Partitioning
A Study of Genetic Algorithm Based on Niche Technique
A Design of Multifunctional Laser Aiming Probe
A New Test Part for Detecting Processing Accuracy of Five Axis CNC Machine Tools
Air Filtration and Pressure Boost Technique for the Operating Room of Construction Machinery
A Simulation Approach for Analyzing MAS Model of SIS
DCC Analysis of the Two Stock Market Returns by a Threshold Model: Empirical Study of the Stock Markets in Japan and Canada
A Novel Integration of GNSS and GIS Approach to Foundation Roller Compaction in Civil Engineering
3D Numerical Simulation of Hydraulics in an Oxidation Ditch
Application of GRNN to Plan Trajectory for a Picking Robot
Analysis on Affection and Dissemination of Road Traffic Accidents
An Image Enhancement Method Based on the Coal Mine Monitoring System
Analysis on Problems Shown in Safety Evaluation of China
A Single-Frame Based Approach to Measure Traffic Queue Length
A Rapid and Sensitive Acetone Gas Sensor Utilizing Thermal Desorption Coupled with Cataluminescence on Nano-Cr₄TiO₈
A Novel Force Sensor Based Multi-Function Take-Off Board
Accurately Counting Algorithm of Incremental Rotary Encoder
Control System Design of a Humanoid Robot Head
A Distributed Phase Time Optimization Method of the Coordinated Control for Active Bus Signal Priority
Coupling Model Analysis on Fluid Structure Interaction in Lifting Pipeling Based on ADINA
A Novel Current Reference Calculation Method for Shunt Active Power Filter under Nonideal Mains Voltages
Agricultural Information Service Evaluation System
A Study on RFID Anti-Collision Algorithm
Analysis of Hydropower Project Financing Risk TOT Mode Using the CIM – AHP Mode — Nansha Hydropower Station in Yunnan as an Example
Build Structure of Fractal Interorganizational Information Systems and Optimize Supply Chain Structure
An Advanced Vehicle Night Driving Assistance System Based on the DaVinci Platform
A Simple Method to Detect the Initial Position for Sensorless SRM
Design and Characterization of Single Beam for Latching Electrothermal Microswitch
Application of Remote Sensing on Monitoring of Forest Fire
Characterizations and Crystal Structure of Er Ions Doped Titania Nanofibers
A Sensor Data Query Method Based on Wavelet Synopsis
A Fast Forward Kinematics Algorithm for 3-PRS Parallel Mechanism
A Summary on Algorithm Research of Synchronous Generator Excitation Control
Contrast Source Inversion Algorithm Applied in 3-D Microwave Imaging
An Approach to Anatomic Contour Extraction of Vertebra CT Image Combining Contourlet Transform and PCNN
Analysis and Improvement of ZigBee Wireless Networks Route
An Anti-Swing and Positioning Controller for Overhead Cranes Based on Multi-Sliding Mode Method
Analysis for 3-D Seepage Field of Gravity Dam Foundation
An Innovative Design for High Performance Control Valve by Using the Synergy of QFD and TRIZ Methods
A Novel Transmit Diversity Technique for MIMO System
An Experimental and Numerical Investigation of the Performance and Dynamic Effects of a Shrouded Centrifugal Pump, Part 1
Assess the Effect of the Foot and Mouth Disease Type O Inactivated Vaccine (O/MYA98/BY/2010 Strain) for Pigs
Decision Analysis in Sustainable Product Development
Construction of Response Vectors in Yeast for Environmental Estrogen Bioassay
Applications of Interaction Design on the Website Interface Design
Analysis and Attack of Two Ring Signature Schemes
A Two-Stage Optimization System for the Plastic Injection Molding with Multiple Performance Characteristics
A New Dynamic Measurement for the Initial Prestress of Membrane Structure
Design and Experimental Study of a Vespiary Exsector
Accuracy Analysis of Centroid Detection Method Used to Star Sensor
A Delay-Dividing Approach for Stability of Neutral System with Mixed Delays
Comparative Investigations on Measurement Technologies of Metal Surface Residual Stress
A Method for Part Analysis and Selection in the Renewal Process of Product Family Architecture
Designing an Embedded Motion Controller Using a 16-Bit Microprocessor Motion Chip and ARM
A New Kind of Multiple Channels Data Acquisition Device & System Based on Sound Card
A Fast Multipole Boundary Element Method Based on Legendre Series for Three-Dimensional Potential Problems
A Multi-Platform Compatible and Open Software Architecture for Computer Numerical Control Systems
Application of PID Control Based on RBF Neural Network in Electro-Hydraulic Servo System for Steel Strip Deviation
Anti Trailing of ATM System Design
Analysis of Combination Mode about Vibration Mixer in Concrete Mixing Mechanics
Design and Analysis of Cards-Flipping Algorithm
Buildings on the Slope Considering Effects of Uneven Settlement of many Piles on the Structure Research
A Modified Finite Element Model for Electromagnetic Tube Compression Process
A Heuristic Algorithm for Single Veichle Route Problem with Multi Time Windows
Design and Development of a Test Platform for Performance of Variable Speed Control Switches in Power Tools
A Study on Dynamic Adjustment Behavior of Asset-Liability Ratio of Manufacturing Listed Companies in China
AL7N01 Butt Joint Welding Residual Stress Measurement by Ultrasonic Method
Agent-Based Simulation of Forest Firefighting
Case Study of Entrepreneurship and Family Business Succession on the View of Life Cycles
Application of Algorithm of Hidden Markov Model and High-Order Spectrum in Fault Diagnosis of Power Electronic Circuit
Based on Specific CNC Realize Automatic Integrated Controlling on All-Purpose Induction Quenching Equipment
Automobile Alarm System Based on Face Recognition Method
Calculation Method of Mechanical Face Seal Temperature Based on Heat Conduction Angle
An Improved Difference Method Based on Three Asymmetric Frames and its Applications in the Vehicle Detection
Adaptive Trajectory Tracking Control of Linear Ultrasonic Motor Based on Fuzzy Recurrent Neural Network
Based on the Network Connection LAN Trojan Detection System Design and Implementation
Automatic Conformance Test Generation for Protocols Specified in EFSM
Adaptive Terminal Sliding Mode Control of Opto-Electronic Stabilized Platform Based on Acceleration Feedback
A Self-Repairing Control for the Uncertain System of a Helicopter Using Adaptive Sliding Mode Technology
An Auto-Focus Algorithm of Fast Search Based on Combining Rough and Fine Adjustment
Application of SOM Network in Ship Pipeline Leakage Detecting
CoNb₂O₆ Ceramic with Geometric Frustration
Application of Digital Phase Sensitive Detection for Electromagnetic Propagation Logging while Drilling
An Efficient Method of Assembly Path Planning in Virtual Manufacturing System
Comparative Analysis on the Allowable Stress and Limit State Methods of Crane Structure Design Standards at Home and Abroad
Allelopathy and Preliminary Separation of Allelopathic Substance in the Extracts of Wheat Seed Germination
A Study of Analysis and Simulation of the Valve Ball’s Lapping Instrument with a Cup Shaped Cutter
140 GHz SIW Planar Antenna
Comprehensive Evaluation of Wind Turbine Type Selection Based on GA-SVR Model
Blind Image Separation Method Based on Artificial Bee Colony Algorithm
Based on Power Bond Graph’s Hydraulic System of Energy Release Research
Analysis on Oil Film Temperature Field of Hydro-Viscous Variable Speed Clutch
A New Method of Forward Index with Obtaining ID Automatically
A Novel Design of SOC Prediction for an Electrical Vehicle Based on the Intelligent Algorithm
Application of RBF Neural Network in WEDM
An Approach to Lumbar Vertebra CT Image Segmentation Using Contourlet Transform and ANNs
Automated Pedestrian Detection and Recognition Applied to Automatic Gate Machines in Urban Rail Transit
Application of Pre-Stack Inversion to a Complex Reservoir Prediction: a Case Study in LG34 Area, Tarim Basin
A Framework Design of Spatial Gamut Mapping
A SVM Model for Identifying Partial Discharge Based on TEV Data
A Numerical Analysis of Soil Arching in Piled Embankments
A Study of Flow-Induced Noise in the Volute of Centrifugal Pump Based on Sysnoise
Changes and Upgrading of Township Industrial District: the Comparison of Two Musical Instrument Manufacturing Industrial Districts
Based on Energy Recovery of Hydraulic System’s Calculation of Energy Consumption
Classifiers’ Environmental Friendly (Green) Re-Design
A Fatigue Life Analysis Method Based on Nominal Stress Method and MSC.FATIGUE Software
A Fuzzy Programming Model of Supplier Selection
Analysis of the Full Flow Field of Torque Converter
An Improved Immune Algorithm for Solving TSP Problem
Application of Fuzzy Clustering and FSM to Represent Graphic Concept Structures on Assessment Database
Based on Value Analysis Process Optimization of Air Cargo Transport
A New Method to Measure the Radial Flexibility of Ship Pressure Hull
An Adjustable Voltage Signal Filament Conversion Alarm System
Attitude Control of Flapping Wing Micro Aerial Vehicle Based on Double Fuzzy Sliding Mode Control
Design and Analysis of the Cam Profile for Rotary Piston Engine Based on High-Order Polynomial
Asymptotic Behavior of Solutions of Neutral Difference Equations Dealing with Mechanical Vibration Problems
Design and Application of Programmable Transient Pulse Generator
BP Neural Network Model for early Diagnosis of Kawasaki Disease
A Image Transmission System Based on Logistic Map
Application of Water Immersion Ultrasonic Phased Array Technology in Wheel Rim Inspection
Crack Damage Identification of Reinforced Concrete Simply Supported Beam Based on BP Neural Network
A Study on PID Control and Simulation Based on BP Neural Network
Design and Analysis of Surface Pressure Sensor for Colonoscopic Robot
An Improved Composite Grating for Phase Unwrapping in 3-D Measurement of Specular Objects
A Novel Sliding Mode Control Base on Synchronization Error for Parallel Robot
Adsorption Characters of 17α-Ethynyestradiol by Activated Carbon
A Coordination Method of Missile and Aircraft for Combat Use
Chapter 2: Mechatronics
An Effective Solution for Trademark Retrieval by Combining Pseudo Zernike Moments and SIFT Features
3D Simulation of Foundation Excavation in a Subway Station
An Impact Analysis of Corn Plant Spacing on Mechanical Harvesting
Design and Research on Key Components of a Novel Self-Propelled Chili Pepper Harvester
2D Simulation of Flow and Sludge Distribution in a Circular Secondary Clarifier
Analog Circuit Intelligent Fault Diagnosis Based on PCA and OAOSVM
Design and Experimental Research on the Sealing Structure of High-Pressure Gear Pump
Design of Monitoring the PV-Wind Power System Based on King View
Design the Information System of the Locating and Tracking Harbor Tug Based on the Web
Design of the Recognition and Decoding System of PDF417 Barcode Based on LabVIEW
Design and Research on Piezoelectric Acceleration Geophone
Design of Multi-Axis Motion Controlled System Based on SERCOS Bus
Design of Product Key Characteristics Management System
Design on Geographical Multi-Scale 3D Symbol Library
Design of Automatic Sorting System of Boxed Drugs Based on Profibus-DP
Design and Simulation of Bi-Directional Hydraulic Lock Used in Hydraulic System for Controllable Pitch Propeller
Design for a New Type of Powder Molding Equipment Based on Multibody Dynamics Simulation
Design of Data Acquisition and LED Display System
Design of Hydraulic Transmission Bicycle Based on Top-Down Method
Design of a Kind of Novel Limited-Angle Brushless Torque Motor
Design of Auto-Detection Instrument for Airborne Thermometer System
Design of Digital Controlled Signal Generator Based on DDS and MCU
Detection Technology of Roll Attitude Based on Geomagnetic Signals and Inertial Trajectory Study
Design for Low Power Loss HART Transducer
Designing and Simulation of a Multi-Direction Tiny Force Switch
Design of a Handheld Terminal which Has Encryption and Decryption Function
Design of Width Measuring Instrument for Needle Roller Bearing without Inner Ring
Design on Interferometric Sensor Demodulation System of OMAP-Based Asymmetrical 3x3 Coupler Output
Robust Fault Detection for Nonlinear Systems with Distributed Delays
Fingerprint Identification System Based on DSP
Experimental Study of Electrical Discharge Grinding Honeycomb Tori
Mitsubishi FA-Based Solar Photovoltaic Tracking Control System
On Integral Control Laws Improvement for Lengthways Pitch Angle Displacement System
Chapter 3: Industrial Robotics and Automation
Development of Pipe-Soil Interaction Experimental System for Steel Catenary Riser in Touchdown Zone
Study and Simulation for Optimization Plan of the Liquamatic Fire Water Cannon with Self-Swinging Device
Research on Pressure Feature of Airflow in Fuze Inlet Tube
The Study of Planar Five-Bar Parallel Robot Dynamic Characteristics
Track Handing Fusion in Data Fusion and Database
The Connecting Performance Analysis for a New High Speed and Precision Double-Contact Toolholder
Simulation Analysis of Tractor AMT Shifting Process Based on Fuzzy Optimization of Downshifting
Research on the Shape Distortions in Plastic Deformation Area for Narrow Plate Bending
Research on the Inlet Pressure Accurate Control Method of the Nozzle for the Single-Jet Nozzle Tester of Aero Engine
Study on Measurement Data Fusion of Mat Temperature Based on Weighted Least Square Algorithm
The Key Technology of PDP Lighting Inspection Machine
Visual Navigation of Four-Wheel Car Based on the Marking Line
Which Rust Deposition Model Should Be Used in Predicting Concrete Cover Cracking due to Reinforcement Corrosion?
Research on the Method of the Calibration of 3D Scanning Probe System Based on the Least Squares of Subsection-Variable Parameters
Study on Improving the Life of Stereolithography Injection Mold
Study on the Photocatalytic Properties of Nano-CdS Crack-Free Thin Films for Removal of Rhodamine B
Sintering Procedure of Calcium Hexaluminate Ceramics
The Mathematical Model and Simulation of Macrosegregation during Solidification Process of Super Heavy Steel Ingot
Study on the Regularity of the Natural Gamma-Rays Attenuation in the Slurry Water
Selection and Research about Mutational Ratio in the Test of Pipeline Section with Scattering Sensor
Super-Resolution Restoration for Image Based on Entropy Constraint and Projection onto Convex Set
Ductile Fracture Criteria Calibration and their Application
Study on Performance of PP/POE In Situ Compatibilization
The Simulation of a Novel Laser Indirect Shock Forming with SPH
The Engine Fault Diagnosis with RBFNN Based on AIC
Stability and Bifurcation Analysis of a Stage-Structured SIR Model with Time Delays
Development of a 3D Full-Field Monitoring System for Large-Scale Static Deformation Based on close Range Photogrammetry
The Preparation of Microcellular Foam PP Reflective Film
Risk Analysis of Robust Recursive Updating Model
Eddy Current Loss and Shielding Research of the Tank in Power Transformer
Warp Weave Texture Feature Recognition Based on Autocorrelation Function
Springback Analysis of TC4 Titanium Alloy Complex Part with Double Curvature under Single Point Incremental Forming Process
Thermal Test of a Sealed Air Cooling Local Environment Control Apparatus for Precision Instruments
Determination of m-Cresol and p-Cresol in Industrial Cresols by Raman Spectrometer
Wireless Real-Time Telemetry Automatic System for Monitoring the Settlement of Structure and its Application
Walking Speed Feature Extraction Based on Wavelet Packet Decomposition
Effect of Heat Treatment on Decay Resistance of Chinese Fir and Pine
Vibration Performance Optimization of the Semi-Active Suspension with Fuzzy Control Method
Development of a Practical Scanning Acoustic Microscopy
The Double-Bridge Beam Structure with Slots for Microaccelerometer
The Design of Control System of Camshaft Grinding Machine Based on FANUC 0i-TC
Sliding Mode Control of Electronic Throttle Valve Based on Rapid Control Prototyping
Research on Rapid Detection Technology for Irregular Surface Products
Simulation and Optimization of Power Train System of Light-Duty Passager Car Based on CRUISE
Two-Sensor Information Fusion with Out-of-Sequence Measurement
The Effect of Al₂O₃ Concentration on Properties of Ni-W-P-Al₂O₃ Electroless Composite Coating
The Limiting Performance Analysis of the Shock Isolation System
Study on Target Tracking Technology in Control of Robot Visual Servo
The Effect of Heat Treatment on Corrosion Resistance of Ni-W-P-Al₂O₃ Composite Coating
Working Pressure Effect on the Microstructure and Electric Resistivity of SiC Films Produced by MF Magnetron Sputtering
The Predicting Life of Automobile Gear by Dry Machining
The Research on the Electronic Supervision of Drug Distribution System Control
Study on Temperature Induced Head Skew Error for Hard Disk Drivers
Ultrasound Multipath Signature of Material Flaw Depth with Single Mono/bi-Static Measurement
Direct Orthogonal Marginal Fisher Analysis
The Optimization Design of the Mill Hydraulic Loading System
Study on Alkali-Oxygen Pulping of Bagasse Wet-Stored with Hypochlorite Bleaching Waste Water
The Mobile Robot Design Research Based on CNC Machine Group
Stiffness Analysis of 6-SPS Parallel Manipulator
Study on Dynamic Hybrid Position/Force Control of Two Coordinated Manipulators
Effect of Stretching Slenderization Treatment for Microstructure of Yak Hair
Weft Weave Texture Feature Recognition Based on Power Spectrum
Study on Enhancement Adsorption of Pipemidic Acid from Aqueous Solution by Using an Amino Group Modified Hypercrosslinked Polymeric Adsorbents
Synthesis of N-Butyl Acetate by Continuous Catalytic Distillation with Ionic Liquid [Hnmp]HSO₄
Self-Propagating High-Temperature Synthesis of TiB₂-Ti(C, N) Cermets Composite Powder
The Design and Experiment of Energy Saving Power-Assisted System of Portable Electric Tool
Study of Variation Equivalence in Machining Process
Thermal Response Analysis of Barrel of ISAW
The Study of Temperature Control Hydraulic Sensor
Study on the Automatic Emergency Shelter Device of Tire’s Bursting
Research on X-Band Weather Radar Network Based on Sensor Grid
Research on the FBG Automatic Testing and Controlling System Based on Virtual Instrument Technology
Study on the Test of Concrete Strength in Winter Construction by a New Technology: Noumenon Sampling Method
Research on the Cutting Heat and Wear of Indexable Inserts with Different Transition Surfaces
Vibration Control Effect Analysis on Tuned Mass Damper System Used in Urban Transportation
Value Engineering-Oriented Approach to Evaluating Conceptual Design Schemes of Sugarcane Harvester
The Research on Concrete Mix Design of Tailings Sand and Gravel
Development and Experimental Study of New Working Fluids for Moderate-High-Temperature Heat Pumps
Study on Milling Process Based on Finite Element Analysis
Theoretical Research of Measuring the Kinetic Energy for Swarm of Fragments with Six-Light-Screen Array
Development of Grinding and Cutting Scientific Data Sharing Platform
Schur Decomposition Model Reduction Algorithm of Discrete-Time Singular Dynamical Systems
Early Pleistocene Variability of SST Record by Foraminifera Shell Mg/Ca Ratio at IODP Site U1313,North Atlantic
Dynamic Behavior of Sandwich Beams with Different Cores
The Application of Virtual Reality Technology in Product Design
Study on Preparation and Properties of Precipitated Silica
Security Mechanisms Analysis for ZigBee Standard Based on AES-CCM*
Research on Velocity Hydrophone Suspension Dynamics
Study and Simulation of the Fluidization Quality of the Concrete Mixer Truck
Study on Catalytic Performance of Supported HPW/C Catalyst for Diethyl Adipate Synthesis
The Forecast of Demand Quantities of Emergency Commodities Based on Grey Interval Correlation Degree
Effect of Secondary Force on Rigidity of Oil Film of the Slipper Pair Based on Hydrostatic Support
The Study on Amended Method for the Measurement of Humidity with Microwave Cavity Sensor
Single Frame Infrared Image Targets Detection Based on Multi-Mixture Filters Model
The Determination of Dynamic Stiffness of Dish-Shaped Metal Corrugated Pipe by Use of Random Vibration Method
The Realization of SVPWM Based on LabVIEW
Research on Space Robot Shared Control System Based Augmented Virtual Reality
Research on the Lining Monitoring System of Mine Shaft in the Special Strata
Synchronization Control of Planar 2-Dof Robot with Redundant Actuation
The Target Motion Detection Algorithm Based on Gauss Mixture Model
Research on Performance Testing and Analysis System about Counter-Rotating Fan Based on LabVIEW
Development of the Kneading Mixer of Synthetic Diamond Electrolysis Residue and its Control Device
Research on the Relationship between the Characteristics of the Trustee and Trust in Construction Projects
The Influence of the Photovoltaic Effect on the Ferroelectric Properties of BaTiO₃ Thin Film
The Numerical Research on the Scramjet Combustion with Different Structure Cavity
Research on Novel Self-Spinning High Speed On/Off Valve Based on Fuzzy-Logic Parameter Self-Tuning PID Controller
The Design of Minibus Carpet Cleaning Machine
Simulation and Analysis on the Effect of the Antiroll-Bar on the Automobile Steady State Response
Research on the Embedded Coefficient in Compressive Stress
Surface Finish Study of Hard Milling 45 Steel with PCBN Tool
Study on the Nonlinear Vibration of Complex Rotor System under the Effect of Temperature Fields
The Fire Surveys Studies Based on the Fuzzy Clustering and the Neural Network
The Analyzing of the Relationship between Function and Form in Industrial Product Design Process Optimization
Distinction of Different Heat-Treated Skim Milk by RP-HPLC of their Whey Proteins
Distributed Measuring and Control System of Torque Rheometer
The Design of HTG Automatic Calibration System Based on Fuzzy Theory
Legal Analysis of Dispute Settlement Mechanism on Medical Emergencies
Impact Electrical Property of Alkali Metal Doped ZnO
Mobile Water Level Meter System
Mobile Robot Tracking Control Based on Lyapunov Method
Model Analysis of Analysis and Evaluation about NBA Match
Monitoring Leaf Nitrogen Concentration in Wheat Based on Spectral Parameters from HJ-CCD Data with Stepwise Regression Method
Multi-Parameter Monitoring System Design of Modern Facility Agriculture
Research on the Method of Continuous Scanning Measurement on the Tooth Surface of the Spiral Bevel Gear Based on the Constant Measuring Force
Dynamic Behaviour of a Novel Compliant MEMS Force Amplifier by MATLAB/SIMULINK
Chapter 4: Machine Vision
Embedded Capacitive Grid Sensing Technology for Torque Measurement
The Pressure-Continuously-Regulating Valve Based on NC Rotating
ELID Grinding Technology of Nano-Ceramic Scalpel
Study on the Structure and Factors of TOT Applied in Water Conservancy and Hydropower Project
Enrichment, Accumulation, and Potential Ecological Risk of Lead in the Sediments of Love River Mouth, Taiwan
Effects of Surfactants on the Characteristics of Y₂O₃ Dispersion Phase through Hydrothermal Synthesis
Empirical Analysis about the Relationship between Economic Growth and Financial Development: Evidence from China
Effects of Tin on Aluminum – Zinc Alloy as Sacrificial Anode to Protect Underground Oil Pipeline in Al-Mahawil Regional
Empirical Study on the Independent Director System' Effectiveness on the Corporate Performance of Listed Companies in Shenzhen Stock Exchange
Estimation of Wheat Chlorophyll Content Based on HJ Satellite CCD
Embedded System Based Target Tracking
Electronic Scale Automatic Calibration System with Image Identification
Evaluating the Performance of Training Algorithms in Active Noise Control Using MLP Neural Network
Employment Evaluation for University Student Based on Analytic Hierarchy Process
The Application of an SD Card in Debugging an Embedded System
Evaluation of Silicate Iron Slag as a Potential Methane Mitigating Method
Effects of Fat on Relationship between Particle Size and Physical Properties of Cross-Linking Yogurt by Purified Transglutaminase from Streptomyces mobaraensis DSM 40587
Effect of Ultra-High Pressure Treatment on Tenderness of Sea Bass
Evaluation Model for Urban Power Supply Systems
Effects of Gelcasting Parameters on the Solids Loading of Ti-6Al-4V
Establishment of Energy Consumption Model of Compressors
Optimal Deployment for Mobile Target Tracking in Sensor Networks
Chapter 5: Sensor Technology
FTIR/ATR Spectroscopy with Stability for Determination of HGB in Human Whole Blood
Fine-Grained Access Control Model Based on RBAC
False Color Composite System of Multi-Spectral RS Images Based on IDL
Finite Element Analysis for the Stiffness and the Buckling of Corrugated Tubes in Heat Exchanger
Fault Diagnosis Method Based on Embedded Acquisition Equipment and SVM
Experimental Investigation on Water Miscible Rolling Lubricant KD1
Finite Element Modeling of the Temperature Field during Grinding Processes
Flow Field Analysis of Pulse Converter Exhaust Manifold of Diesel Engines
Fabrication of Microfluidic Chip and Test of a Hydro-Focusing Based on Sheath Flow
Experimental Study of Influence Factors on Carbon Dioxide Corrosion
Fault Detection of Continuous Casting Process Using Kernel PCA
Study of the Control of Active Transfemoral Prosthesis Based on CPG
Forecasting the Exchange Rate Using the Improved SAPSO Neural Network
The Design and Implementation of a High-Speed Parallel AES Crypto-Chip
First-Principles Conductance Calculations of Ag-Al Co-Doped ZnO
Fuzzy Neural Network Hybrid Learning Control on AUV
Fluctuating Pressure Calculation during the Progress of Trip in Managed Pressure Drilling
Fault Diagnosis of Elevator Based AR Bi-Spectrum
Flow Field Analysis of Conducting Trunk of Comb-Type Cotton Picker
Fire Hazard Factors of Residential-Commercial Composite Buildings through Fire Hazard Cases
Fatigue Crack Growth of Ti-15V-3Cr-3Sn-3Al Alloy
Feature Selection Method Based on the Adaptive Genetic Algorithm-Kernel Partial Least Squares for High Dimensional Data
Evaluation of Zinc Contamination in the Sediments of Canon River Mouth, Taiwan
Field Determination of Surrounding Rock Strength under TBM Construction in Zhongtianshan Tunnel
Fast Mosaicking Panoramic Images with Parallax Scene from a PTZ Camera
Flow Field Numerical Simulation of Diesel Engine Working Process
Family Culture, Institution Environment and Entrepreneurship Orientation: a Case Study from China
Experimental Study of Large-Shell-Diameter Heat Exchangers with Small-Helix-Angles Non-Continuous Helical Baffles
Experimental Study on the Performance of a Natural Gas Engine
First-Principles Calculation of Carbides in Niobium Microalloyed Medium and High Carbon Steels
Experimental Investigation of the Flow Field of Gas-Liquid Slug
The Research on the Hydraulic-Control System for the Heave Compensation under the Deepwater Installation
Four Interacting Electrons in a Vertically Coupled Quantum Dots
Chapter 6: Measure Control Technologies and Intelligent Systems
Genetic Algorithm for Material Cost Minimization of External Strengthening System with Fiber Reinforced Polymer
Graphene Based Transparent Conductive Electrode
Intelligent Operation and Control of Refrigeration Craft in Cold Storage
Mechanical Properties of 5052 Al Alloy Processed by Groove Pressing
MEMS Technology in the Fabrication of Fluxgate Sensor with Micro-Solenoid Cores
Lateral Displacement Control Using Iterative Learning for Intermittent Web Transportation
Housing Decoration Lower Indoor Radon Concentration Survey
Heterogeneity Influence of Organic Matter on the Ozonation Chemiluminescence for Soils and Sediments
How Does the Stable Industry-University-Institute Alliance Promotes the Performance of the Inter-Organizational Knowledge Creation
Large Eddy Simulation of Hydraulic Characteristics of Flow around Two Parallel Circular Cylinders
Logistics Cost Control Research of FMCG Industry
Gateway Node Design of Underground Personnel Position System Based on Wireless Sensor Network
Influence of Internal Cavitating Flow of the Nozzle on Spray Characteristics in a Diesel Engine
Improving the Communication Performance in Multi-Agent Systems for Distributed Manufacturing Process Control
Huffman Tree Visualization
Heterogeneities Measurements of Crack Tip Deformation Fields in Random Short Spruce/PP Composites
Learning Visual Object Classifiers with only Positive Images
Measurement of the Depth Distance Based on the Binocular Stereo Vision
Independent Innovation Network Teaching Platform Research
The Design and Implementation of a Parallel Configurable Paseudorandom Sequence Generator
Limit Deformation Analysis of Rectangular Stiffened Plate to Near-Filed Explosions
Microcrystalline Silicon Thin Films and Triple-Junction Solar Cells
Micro-End-Milling Wear Automatic Inspection System Based on Effective Corner Detection Method
Loss and Gain of the Public Participation in Kunshan Master Plan
Mechanical Properties of Aged Cord-Rubber Composites
Method to Aid Modules Innovation by Patent Knowledge
Logistic Performance Evaluation of Squeeze Casting Equipments Based on Simulation
In Vitro and In Vivo Immunomodulatory Activities of an Acidic Polysaccharide from Gracilaria lemaneiformis
Integral Backstepping Control for a PMSLM Using Adaptive RNNUO
Lead Isotope Geochemistry of the Jilongshan Skarn-Host Au-Cu Deposit, Hubei Province, China
Low-Resolution Range Data Surface Matching for 3D Face Verification
Mechanism and Confirmation in Compact Spinning with Suction Groove
Integration of close Range Photogrammetry and Structured Light Scanner for Cultural Heritage Documentation
Integration of S-P Chart and OT for Cognition Diagnosis on Fundamental Mathematics
Green Synthesis of Semi-IPN Hydrogel-Silver Nanocomposites by a Biotemplate Redox Technique at Room Temperature
Investigation of Attack Angle Character for Hypersonic Inlet
The Significance and Implication of Control Object's Self-Balancing Applied in Turbine Governor Control
Improvement Measures and Evaluation of Energy Efficiency of Air Conditioning
Study on Plate Convex Contour Measurement System
MicroBlaze-Based Digital Controller for Switched Reluctance Motor Research and Implementation
Marking Certification of Adaptive Probability Packet Based on Hash Function
Local Fatigue Properties of Al-Zn-Mg Alloy Welded Joint
Heat Transfer Enhancement of Staggered Ribbed Backward Facing Step Flow with Inclined Impinging Jet
Mean Shift Segmentation Algorithm Based on Hybridized Bacterial Chemotaxis
Legal Practice Experience of early REDD Projects in Developing Countries and Enlightenment in China
Manufacture of Porous FeAl Intermetallics Produced by Mechanical Alloying and Sintering
Intelligent Control of Congestion Based on Multi-SoftMan
Heat Dissipation Design of High Power LED Headlamp
Investigation of Thermal Conductivity of Nanofluids Using Different Experimental Methodologies
Logistics Distribution Vehicle Routing Problem with Time Windows
Hemicelluloses Extraction of Bagasse and Bagasse Pith
Impurity Detection Using Machine Vision
Micro Flow Sensor Based on Frequency Measurement of Micro Whistles
Impressions of Mobile Operators on College Students
Chapter 7: Transmission and Control of Fluid
Parameter Optimization of High Pressure Water-Jet Target Detection
Preparation of Low Cost Ti-6Al-4V Alloy by Gelcasting
Study and Analysis on Pollution of Coal Washing and Separating Project
Neighborhood Analysis-Based Calculation and Analysis of Multi-Scales Relief Amplitude
Modification of Aminosilicone Oil with Long Side-Chain and its Application on Fabric Finishing
Modeling and Simulation of Electro-Hydraulic Proportional Position Control System with the Flexible Hose
Multi-Level Block Information Extraction in Engineering Drawings Based on Depth-First Algorithm
Modal Analysis of Flip Chip for Solder Bump Defect Detection
Microstructure of MoSi₂ Coating with B Addition Prepared by Vacuum Cladding
Multi-Level Blended Learning Exploration and Practice on Experimental Teaching System
Multi-Loop Network Power Grid Monitor Based on the Embedded Operating System
Microstructures and Mechanical Properties of AZ61 Mg Alloy Processed by Equal Channel Angular Pressing
Network Environment and Innovative Learning Research
Moisture Comfort Property of Fine Denier Polypropylene Fiber in Different Environmental Temperature Conditions
Nano-AAO-Based Microsensor for Monitoring Process Carbon Monoxide
Modeling Method of Assembled Structure Coupling the Characteristics of the Joints
Theoretical Analysis and Experimental Research on Emergency Release Devices of Loading Arm
Multi-Temporal Analysis of Urbanization in Mountain Environment: a Case Study of Chongqing, China
Survey of Remote Handing for Hot Cell Equipment
Model of Closed-Loop Detection System for Capacitive MEMS Accelerometer and its IC Realization
Using Multi-Buffer Mode to Improve Performance of Encryption Card
Chapter 8: Mechanical Control and Information Processing Technology
Application of Precipitated Silica in Print Coated Paper Coating
Position Sensorless Control System of SRM Based on Improved BP Neural Network
Observation of Dislocations Configuration of TiAl Alloy during Fatigue Tests at Elevated Temperatures
Numerical Simulation of 2D Circular Dam-Break Flows with WENO Schemes
Research on the Application of DPSK Technology in OFDM Doppler Receiver
Numerical Simulation of Mixing Performance of Intermeshing Co-Rotating Tri-Screw and Twin-Screw Extruders
Nonlinear Relation between Inflation and Economic Growth: Evidence from China
Research on Plasticity Shaped Technology of Gear for New Type Agricultural Vehicles
On Game Behavior of the Inventory Pledge Banks and the Logistical Enterprises
Normalized Coupling Method for Multi Shafts Speed Synchronization
Numerical Simulation and Experiment Research on Pressure Fluctuation and Aerodynamic Noise Field of a Multi-Blade Centrifugal Fan
Numerical Simulation Research on Vortex Characteristics of Centrifugal Pump Inlet Recirculation
Optimal Control for Tractor Automatic Transmission Shift Process
Numerical Simulation Research on the Shape of Top Coal Drawn-Body in Gently Inclined Seam
Numerical Simulation and Experiment Research of the Whole Flow Field inside a Multi-Blade Centrifugal Fan
Numerical Simulation of Gas Exchange Process in Two Stroke Reverse-Loop Scavenging Engines
Non-Oscillation in Linear Delay Differential Systems
Optical 3D Scanning of Small Parts
Numerical Solution on Flow Property of a Shear-Thinning Gel Propellant in a 90⁰ Pipe Bend
The Research of Round Raster Readheads Scheme
Numerical Analysis of Super Drill of Shaft Well Boring Machine in the Stress Field
Network Publishing on Editorial Activities
Novel Acoustic Source Localization Method in WSN Based on LSSVR Regression Modeling
Numerical Analysis of Radial Groove Gas-Lubricated Face Seals at Slow Speed Condition
Numerical Simulation of High Speed Machining of Alloy Cast Iron
Numerical Simulation on Aerodynamically Generated Injection Nozzle Noise
Non-Oscillatory Solutions of Odd-Dimensional System of Functional Differential Equations
Numerical Simulation Analysis of Heat and Mass Transfer during Drying of Jujubes
Chapter 9: Embedded System
Study of Water Freezing and Thawing Process inside the PEMFC Stacks during Cold Start
Research on the Performance Measurement of High School Leadership Training Camps
Supply Chain Partner Relationships Classification: an Empirical Study on LEG Model
Weed Image Edge Detection Based on Order Morphology Transformation
Optimization and Realization of Target Tracking Algorithm Based on Embedded System
Optimal Design of a Non-Overload Centrifugal Pump
Optimization Research on Spares Supply for some Equipment Based on Fuzzy Comprehensive Evaluation
Optimal Design of Cobalt Crust Cutting Head Structure Parameter Based on Genetic Algorithm
Optimization Design of the Thread Joint in Gelin Column of Die Casting Machinery Based on FEM Analysis
Study on Ion Concentration of New Type Transverse Plate ESP
Study on Hydro-Geochemical Action during Seawater Intrusion
The Comprehensive Evaluation of UIG Regional Cooperative Innovation Effect Based on Sustainable Development
Research on Modeling of Compressor Characteristics for Sichuan-East Gas Transmission Pipeline Project
Optimization of Cooling Parameters in Casting Processes Based on Adaptive Evolutionary Particle Swarm Algorithm
Optimal Efficiency Shift Schedule of Automatic Transmission for Construction Vehicle
The Supportive Role of Information Technology on the Subject Teaching
The Finite Element Analysis of Asphalt Pavement with Function Layer under Temperature-Load Action
The Numerical Calculation on the Effective Area of Photonic Crystal Fiber Using FEM
Optimization of Ultrasonic-Assisted Extraction of Flavonols and Anthocyanins from Blueberry Using RSM
Chapter 10: Advanced Forming Manufacturing and Equipment
Three-Dimensional Seepage Analysis and Seepage Control System Optimization of a Hydropower Project
Study on BAF Lipid Phosphorus Biomass and SOUR Active Tests
Panoramic Image Browser Design Based on Cylindrical Surface
Organically and Silylation of Synthesis Nano- Clay-Magadiite
Optimized Utilization of Station Arrival and Departure Tracks for Passenger Dedicated Lines
The Design of DDR-SDRAM Controller Based on Spartan3
Parallel Study of Integrated Test in Software Testing Process
The Quadratic Trigonometric B-Spline Curve with a Shape Parameter
Zircon Geochronology of Granodiorite Porphyry in Yaojialing Mine, Anhui Province, and its Geological Implications
Study on Image Retrieval Method Based on Color and Location
Synthesis and Inhibition Performance of Two Imidazoline Corrosion Inhibitors with Different Hydrophilic Groups
The Integrated Testing System for Performance Parameters of the Hydraulic Excavator
Parametric Optimization of Micro Drilling Using Machine Vision Technique Combined with Taguchi Method
The Finite Element Analysis of CLAC Beam
Semi-Physical Simulation Experiment System of Fuel Control System for an Aeroengine
Research on the Sports Development in China's Ethnic Minority Region
Outlier Detection for Soft-Sensor Modeling Data Based on k-Nearest Neighbor
Chapter 11: NEMS/MEMS Technology and Equipment
Performance Evaluation of the Upside Air-Supply Bottom-Side Air-Return Air Distribution Mode
The Finite Element Analysis of Plate's Distance on Push-Extend Multi-under-Reamed Pile
Study on Rockmass Deterioration Model Based on the Unified Strength Theory
Parse Mechanism of Manufacturing Information Needs Based on Workflow Context
The Research of Dalvik Virtual Machine on the Andriod Platform
Preparation and Properties of Chrome Tanning Agent from Chrome Sludge
The Research of Performance Test System of Seals in Hydraulic Support Column
Particle Swarm Improvement Optimization Algorithm and Performance Study
Particle Swarm Optimization with Negative Gradient
Patent Management in China’s Electronic Information Industry: Comments and Suggestions
Risk Analysis of BOT Finance Mode on Hydropower Projects Based on Analytic Hierarchy Process – Case Study of Xi He Hydropower Station in Anhui Province
Performance Optimization Based on Genetic Algorithm of Double Suction Centrifugal Pump
Study on the Performance Simulation of a Kind of Height-Adjusting Shock Absorber
Study on Calculation Method of Two-Part Heat Price
Temporary Supporting Role of Micro Steel Pipe Piles in Landslide Emergency Treatment
Preparation and Characterization of Macromeritic Tungsten Powder Reduced by Ammonium Paratungstate at Medium Temperature
Two-Stage Evaluation of Life Insurance Industry in Taiwan Using Data Envelopment Analysis
The Design to Achieve the Data Breakpoint Survivor by Using FPGA
Performance Comparison of Two Network Coding Modulation Scheme in Multiple Access Relay Cooperation
Chapter 12: Micro-Electronic Packaging Technology and Equipment
The Finite Element Model Improvement on Shear Behavior of RC Frame Columns under Lateral Bevel Load
The Track Motion Control of the Flying Shear Based on Quintic Spline Curve
The Influence of Supersonic Combustion when the Cavity Parameters Changed on the Chamber Wall
Workover Simulator Training Development
Study on CNC Machining Method of EDM Copper Electrode
Research on Plasticity Shaped Technology of Rear Axle Gear of Motorcar
Study on the Effect of Rice-Frog System on Controlling Agricultural Non-Point Source Pollution
Risk Analysis on Investment of Hydropower Project Based on WBS and RBS
Research on Operation Monitoring System of Regional Logistics System
Research on Technology of Variable Spindle Speed Noncircular Turning
Tension and Shearing Characteristics of Magneto Rheological Fluid under Magnetic Fields
Research on Workshop Management System of Body-in-White Pressing Production
Two-Dimensional Orthogonal Grid Generation
Research on Reuse-Oriented Intellectual Development Method for CNC Human-Machine Interface
The Two-Wheeled Self-Balancing Mobile Robot Based on MEMS
The Development of Projects under the Clean Development Mechanism in China
Preparation of Tens of Micrometers Sized Polystyrene Spheres
The Research of Motion Detection and Shadow Elimination in Video Surveillance
Study on City Hydrology Ecosystem System Influence Suffered from the Urbanization
Research on Preparation Method and Etching Technique of Large Scale Free P+ Diaphragm
Chapter 13: Advanced NC Techniques and Equipment
Product Lifecycle Oriented Quality Design System into Supply Chain
Properties for Certain System of Linear Delay Functional Differential Equations
Properties for Solutions of Differential Equations with Variable Delay on Time Scales
Texture Segmentation of Jacquard Fabric Using Wavelet-Domain Markov Model
The Research of Radar Signal Interface Technology Based on LVDS
The Diversities and Unities of Thermodynamic Function Expressions for Simple Systems
Punching Process and Technical Equipment of High-Density Sub-Mesh Plate
Study on the Production and Properties of Mulberry Fiber
Probabilistic Access Based Call Admission Control in Multi-Traffic CDMA System
Vehicle Path Planning Method Based on Particle Swarm Optimization Algorithm
Research on the Division for Functional Area of Evaluation of Intensive Use Based on Delaunay Triangulation and GIS – A Case of Functional Area for Residence in Qingyang
Pull-in Instability Behaviour of Nanoscale Actuators Using Nonlocal Elasticity Theory
Seismic Studies for Gas Hydrate Characterization in a Marine Case
Study on Construction of Close-to-Nature Man-Made Plant Landscape Based on Natural Plant Communities: the Case of West Lake Scenic Area in Hangzhou
The Impact of Different Temperatures Pre-Steaming Treatment on European Beech
Chapter 14: Power and Fluid Machinery
Research on the Inclusion Complex of Astaxanthin
Reactive Divided Wall Distillation Column: Simulation and Experiment of Methyl Acetate Hydrolysis
Research of Response Characteristics of Elastic Wave Field in Two-Phase Media of Coal Rock
Research and Implementation of Virtual Assembly Motion Guided by Assembly Force
Research of Frame Optimization Technology Based on SIMP
The Impacts of CG Technology on Architectural Designs in Animated Films of the U.S.A.
Study on Cross-Cultural Communication and Cooperative Learning in Web Environment
Research for the Risk Structure of Large Design Enterprise’s Projects Based on Hard System Methodology
Research of Core Characteristics of Search Coil Magnetometer
Quantitative Analysis on the Orthogonal Fluxgate
Research of Low Temperature Si/Si Direct Bonding Wafers with Different Pretreatments
Registration Algorithm of Time and Sensor System Errors for Multi-Platform
Research of Inverted Index Method Based on Block Organizing Technology
Rapid Determination of Organic Matter Fractions by Ozonation Chemiluminescence
Research of Flash Automatic Marking Based on Logical Formal
The Research of Wireless Low Power Transmission System Based on Magnetic Resonant Coupling
The Empirical Identification and Analysis of Key Risk Factors of Inventory Financing
VHDL Finite State Machine Based Elevator Controller
Research of Composite Material Properties Based on Waste Glass and Scrap Aluminum
Research and Application of Full-Length Grouted Anchor in Roadway under Mining Face
Research of Information Extraction from SQL Server Based on SQL-DMO
Removal of Some Heavy Metals by Electrocoagulation
Research of Permanent Magnet Synchronous Motor Speed Control System Based on DSP
Research and Development of a New Laboratory Mill
Research of the Open CNC System Based on PC and Programmable Multi Axes Controller
Real-Time Virtual Instrument Platform Based on Multi-Thread Technique
The Application of Image Security to Electronic Commerce
Trigger Circuit Design for Series SCRs Valve Bank
Recognition and Classification of Human Activity by Posture Sensing and Machine Learning
Research of SCARA Robot Based on Fuzzy_PID Hybrid Control
Research of High Voltage Transmission Line Monitoring System Based on GPRS and ZIGBEE
Separation of Antihypertensive Peptides Derived from Soybean Protein Isolated with Ultrafiltration Technology
Quantitative Ultrasonic Evaluation of Surface-Breaking Crack Height Based on Neural Network
Pupil Detection in Facial Images with Using Bag of Pixels
Chapter 15: Energy Machinery and Equipment
Research on Development Strategy of Sustainable Utilization of Water Resources in Northwest Hebei – Development Strategy of Sustainable Utilization of Water Resources and Vegetable Industry
Water Environmental Quality Evaluation Based on Visualize Classification for Huangbizhuang Reservoir of South-North Water Transfer Project
Research on Evaluation System of Urban Ecological Safety
The Empirical Research of the Effect about Communication Trust and Commitment on Supply Chain Cooperation
Research on Efficiency of Physical Capital and Human Capital in China's Economic Growth
The Method Based on the Reuse in Virtual Scene Modeling
Research on the Mathematical Models for Refractory Castable Corrosion by Molten Slag
Research on an Unmanned Automatic SMS Alarm System for Cooling Tower Fan
Research on Abnormal Car-Following Behavior of Multi-Lane
Research on Emissions of Benzene & Polycyclic Aromatic Hydrocarbons in Constant Volume Combustion Bomb
Speech Evaluation System Based on MFCC
Research on Automobile Transmission Comprehensive Performance Test Experiment Equipment
Study on Thermal Analysis of Dome in LAMOST
The Application Practice of Geography Information Technology in Popular Science Area
Research on Consumer Credit Assessment of Power Enterprises Based on FAHP
Research on Automatic Balance Control of Self-Elevating Offshore Wind Turbine Installation Vessel
Research of the Re-Manufacturing Model and Information System Design Based on Supply Chain Management
Research on Educational Resources Sharing Based on Internet of Things
Chapter 16: Construction Machinery and Equipment
Research on Identification Technology for Weak Signals’ Development Trends of Crop Leaves’ Water Potential Based on Wavelet Theory
The Method of Character Recognition Based on Projection Transformation Combined with LS-SVM
Research on the Movement Effect of Coal Group’s Industrial Structure
The Study of Purifying Coumarin Chemical Compounds in “Yubaizhi” Angelica Dahurica by Macro-Porous Absorption Resin
WBS-RBS-Based Hydropower Projects Investment Risk Analysis
Research on High Precision Time Information Transmission Method
Study on Flight Command and Training Simulation System about Aircraft
The Exploratory Study and Research in Network Environment
Research on Forecasting the Research Costs of Applying Cost-Time Cumulative Curve to the Military Container Roll In/Out Platform
Research on Information Technology and Equipment for Vegetable Quality Safety Supervision
Research on International Standards of Gas and Material Compatibility in Cryogenic Vessels
Research on Microcomputer Control System for Spherical Surface Grinder of Engine Valve Tappet
Research on Loss and Temperature Rise of a Novel Dynamic Electromagnetic Induction Heater
Study and Selection of Working Fluids for Organic Rankine Cycle (ORC) Using Engine Waste Heat Energy
Stresses of Existing Pavement Induced by Widened Embankment over Soft Soils
The Calibration System of Gas Flow Meter Based on Standard Flow Meter Method
Study on Ultrasonic P-Scan Imaging Technology for Rotary Parts Used in Coal Mine Machinery

Les mer

Produktdetaljer

ISBN

9783037853696

Publisert

2012-03-28

Utgiver

Trans Tech Publications Ltd

Vekt

6300 gr

Høyde

240 mm

Bredde

170 mm

Dybde

168 mm

Aldersnivå

P, 06

Språk

Product language

Engelsk

Format

Product format

Heftet

Antall sider

3360

Redaktør

Automation Equipment and Systems

Produktdetaljer

Automation Equipment and Systems

Relaterte produkter

Produktdetaljer

Relaterte produkter