Key Engineering Materials VI
Heftet /
2016
/ Engelsk
Produktdetaljer
ISBN
9783038357155
Publisert
2016-09-15
Utgiver
Trans Tech Publications Ltd
Vekt
830 gr
Høyde
240 mm
Bredde
170 mm
Dybde
21 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
412
The purpose of this collection which was prepared by results of the 6th International Conference on Key Engineering Materials (ICKEM 2016) is to offer the scientists and engineers of results of current research in area of key engineering materials.
Les mer
<p>Selected, peer reviewed papers from the 6th International Conference on Key Engineering Materials (ICKEM 2016), March 12-14, 2016, Hong Kong, China</p>
- Preface, Committees
- Chapter 1: Natural Rubber and Rubber Composites
- Optimal Method of Selection of Water Lubricated Rubber Bearing Materials
- Effect of Carbon Black Substitution with Raw and Modified Bentonite on the Thermal Aging Resistance of Natural Rubber Composites
- Effect of Partial Replacement of Silica with Raw and Modified Bentonite on the Tensile Properties of Natural Rubber Composites
- Synthesis of Novel Cationic Waterborne Polyurethane from Natural Rubber and its Properties Testing
- Effect of Grit Type, Aging Temperature, and Aging Time on Particle Size of Ground Natural Rubber/Zeolite Composite Powder
- Water Diffusion in Natural Rubber Vulcanizates: Effect of Ingredient Loading on Swelling and Mechanical Properties
- Correlation of Blooming and Tensile Properties in Surfactant-Loaded Natural Rubber Vulcanizates
- Cure and Mechanical Properties of Natural Rubber Filled Bacterial Cellulose
- Compatibilization Efficiency of Polybutadiene-Grafted Maleic Anhydride in Ethylene-Propylene Diene Rubber/Epoxidized Natural Rubber Blends
- Modification of Used Palm Oil: Preliminary Study of its Potentiality as Polyurethane Foam Precursors
- Chapter 2: Polymers, Composites
- Preparation and Properties of Solid Buoyancy Materials for Deep Sea with New Unsaturated Polyesters as Matrix
- The Scrutiny of the Insulation Breakdown Strength for the Nanocomposite Oxide Doped Epoxy Resin Insulator with Different Electrodes by Using Positive Impulse Voltage
- Poly(Vinyl Alcohol) (Core)-Polyurethane (Shell) Nanofibers Produced by Coaxial Electrospinning
- Relationship between Tensile Modulus and Oxygen Uptake of Pro-Oxidant Loaded Low-Density Polyethylene Films during Heat Aging
- Effect of Colorant Additive and Thickness on Tensile Properties of Oxo-Biodegradable PE Plastic Bags in Alkaline Solution
- Effect of Morphology and Chemical Modification on Water Degradation Behavior of Polyvinyl Alcohol - Gelatin Blend
- Effects of Gamma Radiation on Thermal and Mechanical Properties of Wood-Flour Filled Polybenzoxazines
- Sorption and Degradation Behaviour of Epoxy Composites Reinforced with Amine-Coated Polyester Triangular Bars in Acid Environment
- Improvement on Surface Tracking and Tensile Stress of Insulator via the Used of Aluminium Oxide Filler
- Experimental Research on Bearing Strength and Effect Laws for Woven GFRP Composite Laminates
- Repair of Flexuously Impact Damaged CFRTP Applying an Inserting Method with Tiny Melted Sheet of PP Resin Modified with Fine Glass Fibers
- Experimental Study on Effect of Ceiling on Upward Flame Spread over Poly(Methyl Methacrylate) Sheets
- Chapter 3: Sustainable Technologies in Chemical Engineering
- Parametric Study of Silica Precipitation from Geothermal Brine
- Development and Application of Bamboo Activated Carbons and their Potency as Adsorbent Material for Adsorbed Natural Gas (ANG); An Overview
- Chapter 4: Materials and Technologies for Conversion, Storage and Supply of Energy
- Effects of Dimethoxyethane as a Co-Solvent on Electrochemical Formation of a Surface Film on Graphite in an Ethylene Carbonate-Based Solution
- Flexible Interdigital In-Plane Supercapacitor Based on Laser Reduced Graphene Oxide (LRGO)
- Solid-State Synthesis and Characterization of Li7-3xGaxLa3Zr2O12 Solid Electrolyte for Li-Ion Battery Application
- Characterisation of Polymer Electrolytes Based on High Molecular Weight PVC and BMIMCF3SO3
- Manufacturing and Macroscopic Properties of Warm Sprayed Cu-36at.%In-15at.%Ga Coating Layer
- Chapter 5: Materials and Technologies for Micro- and Optoelectronics
- In Situ Electrochemical Study of Copper Nanoparticles Stabilized with Food Grade Gelatin
- Design of High Speed and High Efficiency Single-Photon Detectors Using Silicon Avalanche Photodiodes
- Electrical Characteristics of Different Gate Geometry of FinFET
- Calculation of the Rate of Helium Ion Dispersion in Gallium Arsenide Compound
- Photoresponse of Zinc Oxide-Polyaniline Junction at Different Light Intensities
- Wettability of Selected Lead-Free Solders for Higher Application Temperatures
- Chapter 6: Glasses and Special Alloys
- Electrical and Optical Properties of Soda-Lime Glass Coated Using High Voltage Electrodeposition Technique
- Strong Down-Conversion Emission of Sm3+ Doped Borotellurite Glass under 480 nm Excitation Wavelength
- Viscosity and Density of Co-B Liquid Fusions
- Effect of Mn-Content on the Deformation Behavior of Binary Ti-Mn Alloys
- Thermodynamic Study on Interfacial Reaction between Molten Iron and Spinel
- Chapter 7: Materials Processing Technologies
- Comparative Study of Drilling Induced Delamination in CFRP with Different Ply Orientation
- Effect of Gas Based Coolant Lubricants on Machinability of Titanium Alloy Ti6Al4V
- Investigation of Microstructure in Friction Stir Welded Al-Cu-Li Alloy
- Methodology of Uniform Filling Control for Vacuum Casting
- Effect of Shielding Gas Mixture on Gas Metal Arc Welding (GMAW) of Low Carbon Steel (LR Grade A)
- Parametric Analysis of Cylindrical Plunge Grinding on Micro-Alloyed Steel Using Taguchi Analysis
- Chapter 8: Coatings, Surface Engineering, Films and Layers
- Time Dependent High Dimension Model of Functional Gradient Thermal Barrier Coating Material
- Hydrophobicity of Surfaces Coated with Functionalized Titanium Dioxide Nanoparticles
- Butane/Propane Gas Sensing Using Zinc Oxide Film Grown by Successive Ionic Layer Adhesion and Reaction
- Fabrication and Characterization of Ultra Water Repellent Surfaces on Aluminum Alloy Substrate
- Morphological Studies on Spray Deposited Lanthanum Sulphide (La2S3) Thin Films
- Chapter 9: Biomaterials
- Bio-Electrospraying of Human Umbilical Vein Endothelial Cells with a Customized Multi-Hole Spinneret
- Osteogenesis and Degradability of Bioresorbable Biphasic Gypsum-Carbonated Apatite Granules for Bone Tissue Engineering
- Formation of Carbonated Apatite Layer in 1.5× Simulated Body Fluid at Different Refreshing Time
- In Vitro Bioactivity of Macroporous Calcium Phosphate Scaffold for Biomedical Application
- Effect of Hydroxyapatite: Fibroin Ratio on Hydroxyapatite/Fibroin/Chitosan Porous Scaffold Characteristics
- Chapter 10: Building Materials
- Reflections on Mechanisms Affecting the Behavior of FRP-Concrete-Steel Double-Skin Tubular Columns
- Modeling the Heat of Hydration of Concrete Incorporating Fly Ash
- Optimization of Radiation Shielding Concrete for Radiotherapy Treatment Room at Bangabandhu Sheikh Mujib Medical University
- Compressive Strength and Water Penetration of Concrete with Enterococcus faecalis and Calcium Lactate
- Experimental Research on Creep Laws of High-Water Material under Real Pressure Water Environment
- Chapter 11: Recycling and Waste Treatment
- Application of Sand Casting to Recycle Aluminum Alloy for Motorcycle Brake Handle
- How to Increase Plastic Waste Acceptance for Mechanical Recycling: An Introduction to Material Value Conservation and its Phenomenon
- Processing Zinc from Waste of Used Zinc-Carbon Battery with Natrium Chloride (NaCl) for Biogas Desulfurizer
- Precious Nickel Recovery from Palm Oil Mill Fuel Ash Waste (Ni-POMFAW) Using Acidic Leaching Extraction (ALE)
- Remediation of Raw Wastewater of Palm Oil Mill Using Activated Cow Bone Powder through Batch Adsorption
- Visible Light Photocatalytic Activity of Zinc Oxide-Copper Oxide Composites
Les mer
Produktdetaljer
ISBN
9783038357155
Publisert
2016-09-15
Utgiver
Trans Tech Publications Ltd
Vekt
830 gr
Høyde
240 mm
Bredde
170 mm
Dybde
21 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
412