Modern Technologies in Industrial Engineering
Heftet /
2014
/ Engelsk
Produktdetaljer
ISBN
9783037859292
Publisert
2014-02-06
Utgiver
Trans Tech Publications Ltd
Vekt
1530 gr
Høyde
240 mm
Bredde
170 mm
Dybde
41 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
824
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), June 27-29, 2013, Sinaia, Romania.
The 135 papers are grouped as follows:
Chapter 1: Engineering of Manufacturing Processes;
Chapter 2: Advanced in Composite Materials and Technologies;
Chapter 3: Characterization, Modeling and Simulation of Mechanical Processes;
Chapter 4: Robotics and Computer Integrated Manufacturing;
Chapter 5: Technology Transfer;
Chapter 6: Micro and Nano Technologies;
Chapter 7: Maritime Engineering and Navigation.
Les mer
Selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), June 27-29, 2013, Sinaia, Romania
- Preface, Conference Committee and the Topics and Presidents
- Chapter 1: Engineering of Manufacturing Processes
- Improving of the Functional Parameters from Water Stations
- A Study on Plastic Deformations due to Contact Fatigue Wear on a Metallic Coating Deposed in Electric Arc
- Failure Mode and Effects Analysis on Control Equipment Using Fuzzy Theory
- Profiling Method of Side Mill for Threading Screw for Dental Implants
- Optimum Tool Life and Cutting Speed for the Maximum Productivity at the Drilling of the Steel X6CrNiTi18-10
- Analysis of Surface Roughness for High Speed Milling of a Magnesium Alloy Part
- Aspects of Transport Optimization in Holonic Enterprise
- Process Smoothing of the Inner Surface of Cylinders after Honing and its Role in Eliminating Wear in the Activation of the Heat Engine
- Some Peculiarities of the Redundant Design Solutions
- Simulation of Arc Welding Process
- Technique Achievement of Glass Objects Using Kiln Casting Method
- Contributions on Design and Accomplishing of the Whirling Thread Cutting Devices that could be Adapted for Ordinary Lathes
- Research Concerning the Cold-Hardening of the Teeth of a Toothed Gear at Cold Teething by Intermittent Blow
- Intelligent Collaborative Platform for Testing a Product by Virtual Prototyping
- Studies on the Hydrodynamic Flow through the Cylinder Valve
- The Methods to Study the Influence of the Clearance in the Case of Great Speeds and Small Speeds
- Influence of Tool - Semi-Product Friction on the Force Evolution at the Simulation of the Deformation Process with Flat Wedge Tools
- Mechanical and Geometrical Characterization of the Conveyors Belts from Mineral Resources Exploitation
- Recovery of Precious Metals from Catalytic Converters of Automobiles by Hydrometallurgical Solid-Liquid Extraction Processes
- Determination of Constitutive Equation at the Deformation of Materials Using the Compression Test
- Estimation of Reliability Characteristics in a Production Scheduling Model with Failures and Time-Changing Parameters Described by Gamma and Exponential Distributions
- Installation for Determining the Nature of Excavated Material from the High-Capacity Belts of Mining Basins
- Influence of Cutting Parameters on the Surface Quality of Round Parts Made from AZ61 Magnesium Alloy and Machined by Turning
- The Influence of Burnishing Parameters on the Surface Quality of Bars Made from AZ61 Magnesium Alloy
- Aspects Regarding the Hybrid Models in Engineering
- The Study of Compression Engine Cycle Behavior in Terms of Variable Gazodynamic and Geometrical Configuration. Regime of the Maximum Economy
- Quality Oriented Self-Optimizing Control in Smart Machining Systems
- Issues Concerning Vibrations Reduction of the Industrial Drilling Machine in the Manufacturing Processes
- Grapho-Analytical Determination of the Profile Disc Tool for Manufacturing of Complex Helicoidal Surfaces
- The Influence of Complex Dynamic Phenomena Caused by Wind Action on Behaviour of Transportation Pipelines
- Comparative Analysis of Different Methods in Residual Stress Measurement for Polymeric Parts
- Analysis of the Linear Positioning Accuracy on Z Axis at the Horizontal Machining Centre TMA-AL-550
- Thermal Runaway of the BaCO3 + Fe2O3 Homogenous Mixture and Mechanical Alloys at the Microwave Heating
- Thermal Analysis to Evaluate Ageing Process in Heated Tool and Electrofusion Welding of Polymer Pipes
- The Influence of the Feed Rate on the Quality of Surfaces Processed by AWJ at High Pressures
- The Metal Sheets Processed by AWJ. Analysis of the Surface Quality
- Studies Regarding Production of the Moulding Form from Calcined Gypsum
- Researches for the Optimization of the Dehydration Process for Plums and Apricots
- Modular Tooling System for Ultrasonic Assisted Cutting
- Fuzzy Logic Applications in Flanges Manufacturing
- Smart Engineering and Energy Saving Management in Edible Oil Processing Technology and Speciality Fats Industrial Application
- Improved Model to Determine the Tool Life and the Cutting Speed for Minimum Cost at Drilling the Steel 10TiMoNiCr175
- Chapter 2: Advanced in Composite Materials and Technologies
- Protective Coatings on Carbon Steel
- Comparison of Corrosion Behavior of Thin Layers from Copper, Aluminum and Chromium
- Reseachers Concerning Stabilized Aluminium Foams Based on Silicon Carbide
- A Comparative Analysis of New Ti-Nb-Zr-Ta Orthopedic Alloys
- New Composite Materials that Reduce the Effect of Reinforcement Corrosion
- Application of New Synthesized Materials Based on Anionic Clays for Industrial Effluent Decoloration
- Research on Electromagnetic Properties of High Entropy Alloys
- Investigation Techniques of In Situ AlMg/AlN Metal Matrix Composites via Reactive Gas Injection
- Abrasive Wear of Fibre-Metal Composites Based on Fibreglass Woven Fabric Layer
- Mechanical Properties of Fibre-Metal Composites Connected by Means of Bolt Joints
- Chapter 3: Characterization, Modeling and Simulation of Mechanical Processes
- FEA Study on the Elastic Deformation Process of a U-Shape Bimetal Actuator
- A Matlab Neural Network Application for the Study of Working Conditions
- The Stress Distribution of a Layered Contact Cam Mechanism Using Finite Element
- Simulation and Performance Analysis of a FMS/CIM Using Stochastic Timed Petri Nets
- Design and Manufacturing Preparation of a Patient Specific Acetabular Cage
- Real-Time Monitoring Station for Production Systems
- 3D Conductive Textile Shields
- Use of Finite Element Method in Optimization of Quay Crane's Grab
- Geometric Analysis of Motions Exercised by the Stewart Platform
- The Inverse Problem of Kinematics as the Tool for Determination of Motion Trajectories Exercised by Worm Drives of a Stewart Platform
- Synthesis of Constructive-Functional Parameters to Improving the Dynamic Behavior of Automatic Mechanisms
- UML Models of Design and Knowledge Representation for Technical Production Preparation Needs
- Analysis of Simulated Welding Thermal Cycles S700MC Using Thermal Imaging Camera
- About Variability of Using of Methods of the Shape Identification Based on Geometrical Correlation
- A Survey on Capp Systems Development Methods
- Virtual Analysis of the Mining Support under Loads of the Roof
- The Aid of a Mistake Proofing with the use of Mechatronic Systems According to the Poka-Yoke Methodology
- The Self-Excitation Phenomenon of Quasi Shielded Inductive Proximity Switches
- Aspects Concerning the Dynamics of the Mechanisms with Clearances
- The Model of Discrete Production Scheduling System in UML Notation - Classes Diagrams
- The Graph Representation of Multivariant and Complex Processes for Production Scheduling
- Theoretical and Data-Based Mathematical Model of a Special Vehicle Breaking System
- A Method to Obtain a Generalized Model of the Pressure Evolution within the Braking System of a Vehicle
- Original Computer Based Solutions in Structural Studies
- Analysis of Compression Ignition Engine Cycle Based on Irreversible Thermodynamics
- A Dynamic Model of the Human Body in the Vertical Direction
- Assessment of a Traction Model for Agricultural Tires Based on a Variable Shear Area Model and Experimental Data
- Short Term Prediction of Hydroelastic Dynamic Response in Random Waves for an 1100 TEU Container Ship
- Transient Regimes Analysis for a Diesel Engine
- Pressure Waves Simulation in Diesel Engine Injection System
- Longitudinal Loop Power Flow Analysis on a 4x4 Transmission Vehicle Taking into Consideration the Running Track Type
- Static and Dynamic Analysis of a Planetary Gearbox Working Process
- Non-Intrusive Hybrid Energy Monitoring System
- Design and Realization of a Sound Module for a Miniature Model Steam-Locomotive
- Drying Simulation of Shrinkable Clay Tiles Using Variable Diffusivity Model
- Complex 3D Measuring by Multiple Laser Scanning of Automotive Parts
- Mathematical Model of the Damped Variable Cross Section Beam in Transportation
- Chapter 4: Robotics and Computer Integrated Manufacturing
- Controlling a Social Robot - Performing Nonverbal Communication through Facial Expressions
- Functional Evaluation and Performance Improvement of a Gantry IR’s NC Axes
- Simulation of the Stewart Platform Carried out Using the Siemens NX and NI LabVIEW Programs
- The Command of a Virtual Industrial Robot Using a Dedicated Haptic Interface
- Mobile Robot Trajectory Analysis Using Computational Methods
- An Overview on the Design of Mobile Robots with Hybrid Locomotion
- Localization Methods for Mobile Robots - A Review
- Kinematic Modelling and VR Simulation of a 3DOF Medical Parallel Robot with One Decoupled Motion
- Preliminary Ideas on Designing an Unmanned Aerial Vehicle Based on Coanda Effect
- Controlling the Movement of the Robot's Effector on the Plane Using the SVG Markup Language
- Integration of a Virtual 3D Model of a Robot Manipulator with its Tangible Model (Phantom)
- Design of Collaborative, Cross & Carry Mobile RoBots "C3Bots"
- Dynamic Modelling of a 3DOF Medical Parallel Robot with One Decoupled Motion
- Chapter 5: Technology Transfer
- Business Ecosystems: Strategy Maps in Relation to Sustainable Development
- Environmental Analysis Procedure for Implementation of Environmental Management System ISO 14001 in Shipping Company
- Initiatives of Textile Industry Organizations towards Environmental Issues
- Methods of Manufacturing Data Acquisition for Production Management - A Review
- Model and Analysis of the Key Factors Influencing Organizational Changes Implementation within Business Processes
- Assessment of the Risk Parameters and their use in the Vessels Traffic Management
- Conceptual Research Model Regarding the Effects Resulted from the Implementation of Environmental Management System at Organization Level
- Technological Entrepreneurship: Success Factors as Perceived by Potential Young Entrepreneurs
- CFD Study on must of Grapes Separation in a Hydrocyclone
- Cloud Computing Environment for Engineering and Business Education
- Factors Influencing Employees' Motivation for Knowledge Communication
- Market Oriented Approach to the Production Management on the Operational Level
- The Importance of Understanding the Stakeholders in Industry Actions - A Corporate Social Responsibility Perspective
- Chapter 6: Micro and Nano Technologies
- Orthopaedic Prosthetic Systems Topographically Characterized at Nanometric Scale
- ESD Garments with Bilayer Structure
- Estimating ESD Properties of Fabrics Based on Correlation between Dielectric Losses and Charge Decay Time
- Nanotechnology and Processes the Nanophotovoltaic Panels
- Modeling of Strain and Stress States for Straight Rods with Particular Cross Sections Subjected to Torsion
- Dilatometry and DTA Analyses of a Sample Made of Ni Base Super Alloy with a ZrO2/20%Y2O3 Ceramic Layer
- The Influence of Thermal Treatment upon Nanostructure and Composition of YZrO Based Ceramics Obtained by Atmospheric Plasma Spraying
- Considerations on the Micro-Indentation and Differential Scanning Calorimetry of Arboform Reinforced with Aramid Fibres
- Chapter 7: Maritime Engineering and Navigation
- Choosing the Optimum Method of Treating the Ballast Water Onboard Ships
- Hertz Contact Problem between Wheel and Rail
- Analysis of Rails of a Ferry Boat under Wheels Contact Loading
- Statistical Model for Ultra-Wide Band Radio Channels Onboard Ship
- A Study Initiated because of the Global Warming from R-134a
- Processing of the Data Obtained with the Advanced Doppler Velocymeter
- Energy Review on a Maritime Energy Transfer System for Comercial Use
- Modern Education Facilities for CAD/CAM/CAE Training of the Future Maritime Engineers
- Comparative Analysis of Tanker Ships Incidents and their Environment Impacts
- Applying Determination Models for Human Errors in Sequential Analysis of Maritime Accidents
- Transshipment Modeling and Simulation of Container Port Terminals
- Different Methods of Refloating a Ship
Les mer
Produktdetaljer
ISBN
9783037859292
Publisert
2014-02-06
Utgiver
Trans Tech Publications Ltd
Vekt
1530 gr
Høyde
240 mm
Bredde
170 mm
Dybde
41 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
824