Produktdetaljer
ISBN
9783037853719
Publisert
2012-03-28
Utgiver
Trans Tech Publications Ltd
Vekt
5500 gr
Høyde
240 mm
Bredde
170 mm
Dybde
140 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
2790
This comprehensive work contains up-to-date information, gathered from all over the world, concerning state-of-the art manufacturing science and engineering, focusing on New Materials and Processes. The 534 peer-reviewed papers are grouped into 16 chapters: Non-Ferrous Metallic Materials; Iron and Steel; Micro/Nano Materials; Ceramics; Optical/Electronic/Magnetic Materials; New Functional Materials; Building Materials; New Energy Materials; Environment-Friendly Materials; Earthquake-Resistant Materials and Design; Biomaterials; Smart/Intelligent Materials/Intelligent Systems; Polymeric Materials; Thin Films; Mechanical Behaviour and Fracture; Tooling, Testing and Evaluation of Materials.
Les mer
Selected, peer reviewed papers from the 3rd international Conference on Manufacturing Science and Engineering (ICMSE 2012), March 27-29, 2012, Xiamen, China
- Preface, Sponsors and Committees
- Chapter 1: Non-Ferrous Metal Material
- Damping Properties of AZ91D Magnesium Alloy with Y Addition
- Study of Duplex Ageing Treatment of AZ80 Magnesium Alloy after Deformation at Room Temperature
- Effect of the Grain Size on Electrochemical Corrosion Behavior of Cu60Ni20Cr20 Alloys in Solutions Containing Chloride Ions
- Preparation of Spherical Nanometer ZrO2 Reunion Powders via Single Emulsion Assisted with Homogeneous Precipitation
- The Preparation of Rapidly Solidified and Powder Metallurgy AZ91 Alloy
- Research on Forming Process of Anodic Oxide Film of AZ91D Magnesium Alloy
- Fracture Characteristic of a Mg-Gd-Y Alloy Compressed at High Strain Rate and Sub-Zero Temperature
- Effect of Aging Condition on the Mechanical Properties of an Al-Cu-Mg-Ag Alloy
- Effects of Hot Deformation Process on the Microstructure and Hardness of AZ80 Magnesium Alloy
- Development and Application of a New Carburant Material
- Influence of Annealing Treatment on Precipitation of β-Mg17Al12 Phase of AZ80 Magnesium Alloy
- Microstructure and Strengthening Mechanism of Natural Aging of TZS88 Aluminum Alloy
- Microstructure and Texture of Rolled Cu-0.2wt%Cr-0.5wt%Zr-0.1wt%RE(La)
- Cellular Automaton Simulation and Experimental Observation of the Dynamic Recrystallization of Titanium Alloy TC11 with Varied Strain Rates
- Effect of Temperature on Impact Properties of ZA27 Alloy
- Effect of Al on Microstructure and Mechanical Property of NiAl-Mo Alloyed with Nb
- Crystallization Behavior of Mg60Ni23.6La16.4 Metallic Glass
- Formation Enthalpies of Yellow Gold Alloys with RE Addition Calculated with Chou’ Models
- Study on Simulation and Visualization of Microstructure
- Slow Cooling Treatment of High-Alloyed Superalloy
- Effect of Nd on Structure and Properties of Hypereutectic Al-Si Alloys
- Effect of the Solid-Solution Treatment on the Die-Casting Structures and Properties of Commercial RE-AZ91 Mg Alloy
- Effect of Compound Modification on Microstructure and Properties of High Silicon Aluminum Alloy
- Influence of Overburning on Microstructure and Property of 6061 Aluminum Alloy
- In Situ Fabrication and Microstucture of ZrB2 Particles Reinforced Aluminum Matrix Composites
- Chapter 2: Iron and Steel
- Action of Magnesium on Carbide Spheroidization in Annealed Bearing Steel
- Calculation Model of Mass Action Concentrations for CaO-MnO-FeO-SiO2-MgO-Al2O3 Slags Based on the Ion and Molecule Coexistence Theory
- Effect of the Non-Equilibrium Solidus Temperature on Length of Soft Reduction Zone
- Research on the Microstructure and the Growth Mechanism of Oxidation Film of T91 Steels after Service
- Effect of Vanadium on the Separate Out of Intragranular Ferrite
- Optimization of Flow Control Devices in a Stainless Steel Tundish
- Research on Smelting Vanadium Steel by Silicothermic Reduction Direct Alloying with V2O5
- Study on Non-Metallic Inclusion in 82B Steel Continuous Casting Billet
- The Study on the Orderliness of Change of Microstructure and Mechanical Properties in Simulating the Heating Process of Bending of X80 Pipeline Steels
- The Optimum Microstructure of Reheated X80 Bend Pipes
- Thermodynamics Analysis of Clogging of 409 Stainless Steel
- Effect of Alloy Addition on Mechanical Properties and Decarburization Sensitivity of Spring Steel
- One-Step Method of Carbon Thermal Reduction and Nitride to Produce Vanadium Nitrogen Alloy
- Smelting Cleaness Control of Supercritical Rotor Steel 30Cr2Ni4MoV
- Thermodynamic Calculation of Microalloy Precipitation in Austenite Region for Fe-C-N-Al-Ti-Nb Steel
- The Influence of Microstructures on the Corrosion Properties of X80 Pipeline Steel in Near-Neutral pH Soil
- Influences of Adding Aluminum on Inclusions in H13 Steel through P–ESR
- Development and Performance of Water Soluble Salt-Resistant Polymers for Chemical Flooding
- Enriching Valuable Elements in Tailings Re-Concentration of Bayan Obo Mine by Direct Reduction
- Effect of Continuous Annealing Parameters on the Microstructure and Magnetic Property of Cold Rolled Dual Phase Steel
- Detecting the Way of the Intake-Port Wall-Film Entering the Cylinder
- The Oxide Inclusion, Microstructure and Properties of Low Alloying Steels
- Effect of Corrosion Inhibition on the Stress Corrosion Cracking of UNS S31603 Austenitic Stainless Steel
- The Effect of Trace Boron on Corrosion Resistance of the Casted 0.04C-16Cr Ferritic Stainless Steels in H2SO4 Medium
- Rust Layer Structure Analysis of Q235 Atmospheric Corraded in Tangshan Industrial Estate
- Research on Reduction Dearsenication in Molten Iron (Steel)
- Solubility Product of MoC with NaCl Type Cubic Crystal Structure in Iron
- The Design of High Precision Temperature Control Circuit for DFB Laser Diode
- Optimization of Weir & Dam with Drain Holes in Continuous Casting Slab Tundish
- Basic Research on Reduction Characteristics of Niobium Compounds in CaO-SiO2-Al2O3 Slag
- Study on Polycyclic Aromatic Hydrocarbons Distribution during Single Coal Coking
- The Assessment of Work Hardening Behaviour of Dual Phase Steels with Coarse Martensite Islands
- Effects of Boron Addition on Undercooled Austenite Transformation of Low Carbon Mn-Nb Steels
- Effect of Microstructures on Corrosion of X80 Pipeline Steel in an Alkaline Soil
- Effect of Mo and Ni Content on the Mechanical Properties of Low Carbon and Alloy Steel Casting Sample for Coal-Mining Machinery
- Comprehensive Influence of Cr and Si on Hardness and Wear Resistance of Cold Roll Steel
- A Desulphurization Mathmatical Model for Single Snorkel Refining Furnace
- Creep-Rupture Properties and Life Evaluation of Low Hardness Modified 9Cr-1Mo Steel
- Microstructure and Mechanism of Three Spheroidizing Treatment for the Carbide of GCr15 Steel
- Recovery of Copper and Cobalt from Spent Aerospace Material with Pollution-Free Oxidant
- Chapter 3: Micro/Nano Materials
- Influence of Sealing Methods in the Failure Behavior of Fabricated Composite in Ozone Gas Environment
- Preparation and Mechanical Property of PLLA/Nano-SiO2 Composite
- Research on the Applications of Internet of Things Technology in Cultural Heritage Preservation
- Study on Optimization of Machining Parameters in Electrochemical Machining
- Alumina (Al2O3) Nanofibers from Electrospinning
- Review of the Research on Evaluation of Livable City
- Role of Aluminum (Al) Thin Film in the Improvement of Anti-Permeation Behavior of Fabricated Composites in Corrosive Environment
- Tool-Workpiece Temperature for Continuous and Interrupted Cutting of ASSAB 760 Steel with Dry Machining Process
- Investigation on Properties of Electroless Ni-P-W/Al2O3 Composite Coatings Deposited on Sintered NdFeB Permanent Magnet
- Crosslink Effects of Octavinyl Polyhedral Oligomeric Silsesquioxane on the Mechanical and Thermal Properties of Polyacrylate Nanocomposites
- Analysis of the Dynamic and Static Load of Light Sport Aircraft Composites Landing Gear
- Study on the Dyeability and Hygroscopicity of Polypropylene/Cellulose Acetate Butyrate Fibers by Melt Blending
- Study on the Shearing Characteristic of the Epoxy Resin Matrix Composite Enforced Promiscuously by SiC Nano Fiber and Twaron Staple
- Effect of Constituents of EPDM/PVC Composite on Damping Capacity
- Research of Ultrasound and Electromagnetic Field on the Microstructure of Cast-Rolling Magnesium Strip
- Comparison on the Compositions, Microstructure and Hardness of Super Large Section Prehardened Steels for Plastic Mould Block
- MD Simulation of Chip Formation in Nanometric Cutting of Metallic Glass
- Design and Simulation of Drum Solid-State Fermentation Equipment Based on Solidworks
- Modified Gelatin-Based Cell Assembling Process Using Glycerin
- Numerical Simulation on Effect of Nozzle-Hole Layout on Spray Characteristics and Combustion in a DI Diesel Engine
- Quantitative Analysis of Inclusions in Aluminum
- Fabrication and Characterization of Hydroxyapatite Nanocomposites Based on Bacterial Cellulose with Surface Modification
- The Study on the Change of Sheer Strength Characteristic Parameter and Soil Nail Firmness of Effect in the Condition of Freezing-Thaw Cycling
- Effects of Magnesium Aluminate Spinel on the Properties of Al2O3-SiC-C Castables for Blast Furnace Iron Trough
- Effects of the Z Value on the Properties of β-Sialon/ZrO2 Composites
- A Model for the Films Formation of Nb–Si–N Ternary Compound Deposited
- Effect of Carbon Content on Preparation of Vanadium Carbide Nanopowders by the Carbonization of the Precursor
- Synthesis of Silver Nanoparticles through Two-Phase Reaction by the Reduction of N, N-Dimethylformamide
- A Study on Face Strain and Interlaminar Stress of Bamboo Plywood
- Effects of Technological Parameters on Properties of Ni Film Prepared by Supercritical Carbon Dioxide Emulsion
- Accurate Faraday Measurement System for PBB Glasses in Current Transducer Application
- Preparation and Characterization of MAO Film with High Dense Layer
- Application of Centroidal Voronoi Diagram in Numerical Model of Microforming Process
- Effect of Pd on CH4 Reforming with CO2 Catalyzed by Ni over Mixed Titian –Alumina Support
- Study on Mechanical Properties of PEEK Composites
- Study on the Interface Parameters of Composite Materials with Consideration of the Effect of Thermal Stresses
- Comparative Study the Effect of Different Raw Powder on Foaming Process during Sandwich Rolling
- Managing B2B-Supply Chain with Option Contract under Disruptions
- Research on Segregation at Interface in Al2O3/Al-Cu Composites
- Predictive Control of DC/DC Converter Based on State Observer
- Thermodynamic Application of Predicting the Effect of Trace Element of Ag on Reinforced In Situ Particles in Al-Cu/TiB2 Composites
- The Effect of Nano-Aluminum on Morphology and Properties of Polyimide Matrix Composites
- Abrasion Behavior of WC Reinforced Cast Iron Surface Composite Fabricated by Cast-Infiltration Method
- Harmonic Response Analysis of Precision Grinding Machine Bed Made by Artificial Granitic Composite Based on ANSYS
- Hydrogen-Induced Wear of Ti–6Al–4V Alloy
- Fabrication Process and Properties of Si3N4-SiC Ceramics by a Two Step Sintering Method
- Fabrication of Al-Based Matrix Composite Reinforced with WAl12 Intermetallic Particles by Press-Forming Process Using High-Energy Ball-Milled Powders
- Finite Element Analysis of Flexural Property of Short Flax Fiber Reinforced Polypropylene Composites
- Failure Analysis of Laminated Composites under in-Plane Compressive Loading
- Surface Reconstruction from Unorganized Points Using Graph Cut
- The Study on the Thermal Formability of AZ31 Magnesium Alloy Sheets
- Mechanical Performance of Composite Laminate with Oblique Splicing Ply
- Effects of Interface on Wear Resistance in Fiber Reinforced Composites
- Research on Machining Simulation of Large Scale Spiral Bevel Gear Machine Tool
- Research Progress in Preservation of Postharvest Edible Fungi
- Research and Realization of Hex Nut Standard Parts Library Based on Reusable Knowledge
- The Monitoring Elements Structure of Process of Requirement Integrated & Dynamic Espial for Complex Products RMS
- Hygrothermal Behavior of T700 and T300 BMI Used for Advanced Polymeric Composite
- Graft Copolymerazation of 1-Vinylimidazole onto Poly(vinylidene Flouride) by Radiation-Induced Grafting for Fuel Cells Membrane
- Modeling the Welding Process of the Low Alloy Ferritic Steels T/P23 and T/P24
- Application of Fuzzy Control in Wind and Solar Energy Storage System
- Predictive Maintenance through Condition Monitoring at Diffusion Equipment of a Solar Cell Manufacturing Environment
- The Synthesis of Eco-Friendly Silicone-Modified Polyacrylate Pigment Printing Binding Agent
- Thermal and Dielectric Properties of Inorganic-Organic Nanocomposites Involving Epoxy Resin and Polyhedral Oligomeric Silsesquioxanes
- Development and Application of a New Al-Si-Mg Alloy for Semi-Solid Forming
- The Enhanced Electrochemical Performance of Lithium/Sulfur Battery with Protected Lithium Anode
- Research on the Machining Methods in Machining Center
- Microstructure, Mechanical and Wear Properties Study of Vanadium Carbide Particles Reinforced Iron Matrix Composite
- Synthesis and Infrared Emissivity Properties of CdS/TiO2 Composite
- The Research on Improving the Salt Resistance of Bentonite Used in Geosynthetic Clay Liner
- 3D Numerical Simulation of Linear Friction Welding of 45# Carbon Steel
- Study on Properties of PEEK Composites Reinforced by SCF
- Effect of Intercalated Agents on Thermal Deintercalation of Kaolinite
- Preparation of Multi Cage-Like Zinc Oxide Nanopowder with High Specific Surface Area via a Large-Scale Hydrothermal Method
- The Brazing of Copper Pipe and Aluminum Pipe Based on the 4R
- Dielectric and Magnetic Properties of Sintered Cobalt Ferrite Derived from Nanocrystalline Powders
- PP/Wasted PET Fabric Composites Compatibilized by two Different Methods: Mechanical Properties, Morphology and Thermal Stability
- Phase and Crystal Structure Evolution of MoSi2-AlCr2 Quasibinary System Alloys
- Effect of Ga on Microstructure and Mechanical Properties of the TiCu-Base Nano/Ultrafine Bimodal Structured Alloy
- Study on Technology of Ultrasound-Microwave Assisted Improves Preparation of Porous Starch
- Local Electric Field Distribution of Graded Cylindrical Composites
- Preparation and Characterization Flexible Conductive PPy/BC Nanocomposite Membrane
- PHC Pile Bearing Capacity and Application
- Preparation and Characterization of Nylon 6/Nylon 6 Clay Fibers
- Mechanical Response and Damage Analysis of 3D Multi-Structured Knitted Composite under Quasi-Tensile Loadings
- Failure and Broken Criteria for 2.5D Woven Composites Loaded in Weft
- Effects of Temperature on Tensile Strength of Carbon Fiber and Carbon/Epoxy Composite Sheets
- Value Accounting and Audit the Integrity of the Game Analysis
- Spinning Effluents Treatment from Dry-Spun Acrylic Fiber Producing by Integrated Membrane Filtration
- Tunable Ferromagnetism above Room-Temperature in Self-Assembled (In,Mn)As Diluted Magnetic Semiconductor Quantum Dots on Be-Doped AlxGa1-XAs Template by Molecular Beam Epitaxy
- Destabilizing Effect of Zirconia Products Caused by Aluminum
- Development of Cam Design and Simulation System
- Preparation and Characterization of Polyaniline / Montmorillonite Composite by Situ Emulsion Polymerization
- Antifungal Properties of Ag-SiO2 Core-Shell Nanoparticles against Phytopathogenic Fungi
- Preparation, Characterization and Dielectric Properties of BT/PI Film
- Low Carbon Economy and Sustainable Energy Development in Rural Areas of Sichuan Province, China
- First Principles Study on Rutile SnO2 Improving Gas Sensor Properties of Porous SnO2-In2O3 Composites
- On Effect of Microstructure about Bi for AgSnO2 Compositions by Reaction Synthesis
- Low Loss Hybrid Dielectric-Metal-Dielectric Waveguides for Sub-Micron Mode Confinement and Efficient Directional Coupling
- Preparation and Properties of Long Wheat Straw Fibers Used for Composite
- Characterization of an Autoclaved Aerated Concrete Building with Respect to a Similar Unreinforced Masonry Structure
- Role of Interface of Epoxy/Clay Nanocomposites and its Effect on Structure-Property Relationship
- Synthesis and Characterization of Bacterial Cellulose/Calcium Silicate Composites
- A Multi-Degree-of-Freedom System Modal Parameters Wavelet Transform Identification Method
- LBM Application in Two-Phase Fluid Flow with Large Density Ratio
- Research on the Recognition Technology of Letter String on Label
- Fabrication and Characterization of ZnO-Based Nano Hetero Structure by Using a 2-Step Hydrothermal Growth Method
- The Research Progress of Soccer Learning Mechanisms for Robot
- Magnet Skew Technology Investigation for the Reduction of PMLSM Thrust Ripple
- Pass Design Method for Rolling Titanium Alloy Rod
- Preparation of Al-N Based Material by Ti-Bearing Blast Furnace Slag
- Investigation of Microstructure Characterization and Machinability of the B4C/BN Nanocomposites Bulks Fabricated by Chemical Reaction Process and Hot-Pressing Process
- Preparation and Chemical Structure of RIC of PP/ Modified PA66 In Situ Microfibrillar Composite
- Chapter 4: Ceramic
- A Novel Process to Synthesize NiCoMnO4 Nano-Powder for NTC Electro-Ceramics
- Low Temperature Sintering of BaO–ZnO–TiO2 Ceramics for LTCC Applications
- Nonlinear Absorption Properties of Spherical Gold Colloidal Nanoparticles
- Influence of La2O3-Doping on Dielectric Properties of Ba(Ti, Sn)O3 Ceramics
- Reducing Thermal Conductivity of Polymer Derived SiC Ceramics via Microwave Sintering Processing
- Decisional Autonomy of Approach and Landing Phase for Civil Aviation Aircraft using Dual Fuzzy Neural Network
- Effects of V2O5 Addition on the Microstructure and Microwave Dielectric Properties of ZnNb2O6 Ceramics
- Dynamic Modeling and Acceleration Control of Electric Vehicles
- Properties of Ni-Cu Bulk Alloy Prepared by Spark Plasma Sintering Technique
- Effect of Rb+ -Doping on the Crystallization, Phase Transition and Photocatalytic Activity of Nanosized TiO2 Catalyst
- Comparison of Surface Electrochemical Properties between Purple Rocks and their Derived Soils as Related to Pedogenesis
- Test and Research on Ratchet Effect of 16 Mn Steel under Cyclic Loading
- Dynamics Modeling of Main Rotor Teeterboard Flap on Unmanned Autonomous Rotorcraft by D' Alembert Principle
- Study on Morphology and Property of UHMWPE/ PP Blends
- Realization of A Data Communication Card for A High Speed Digital Electronic Engraving Machine
- Preparation of Dumbbell-Like ZnO Microcrystals and Characterization of their Thermal Radiation Properties
- Synthesis of γ-Bi2MoO6 Spheres and their Photocatalytic Activities for Degradation of Rhodamine B
- Mechanical Properties and Heat Treatment Research on Machinable Glass-Ceramic
- Synthesis of Au Nano-Particles Using Plasma Sputtering into Oil
- Effect of Multiple-Binders on Properties of Al2O3-Based Ceramic Foam Filter
- Effect of Solid Content on Performance of Porous Alumina Ceramic by Gel-Foaming
- Frequency Conversion Timing to Adjust the Centrifugal Pump Flows
- Fault Detection in a Cracked Pipeline Embedded with Piezoelectric Sensors/Actuators Employing Bond Graph Approach
- Intracellular Distribution of Iron in the Cell of Magnetotactic Bacteria Inhibited the Biosynthesis of Magnetic Nano-Particles by Limiting the Iron Source
- The Influence of Different Surfactants on Morphology of Nano Calcium Sulfate
- Effect of Sintering Temperature on Microstructure and Mechanical Properties of Al2O3-TiC-ZrO2 Ceramic Composites
- Research on Predicting Model of Surface Roughness for Ground Engineering Ceramics
- Thermal Shock of Semi-Infinite Cellular Ceramics
- The Positive Temperature Coefficient of Resistivity Effect in (1-x)KNbO3-xBaGeO3 Based Ceramics
- Effects of Trammonium Citrate on Slurry of PMN-PZT in Gelcasting Process
- Static Corrosion Behavior of Refractory Lining Materials for Magnesium Electrolytic Cell
- Sintering Behavior and Dielectric Properties of BZN Ceramics Coated by Precursor Solution of CuSO4
- Preparation and Characterization of Manganese Doped ZnO Varistors
- TiB2 Ceramic Tool Turning 45# Steel Experimental Study
- Effect of Toughening Mechanisms of Crack Bridging on Ceramic Materials
- Ethanol Sensor Based on Hydrothermal Method Prepared Porous α-Fe2O3 Nanorods
- Design and Manufacturing of Large Amusement Devices for Performance and Reliability with Qualitative Reasoning
- Analysis of the Current Situation of the Geological Relics Classification System
- Chapter 5: Optical/Electronic/Magnetic Materials
- Study on Surface Chemical Composition and Structure of PVP/Al Composite Powder Using XPS Analysis
- Methods of Maintenance Resources Configuration and Optimization for AMS Based on Effectiveness Evaluation
- Mechanical Design and Dynamics Analysis on a Jumping Robot
- Synthesis of LiCl Doped Hollow TiO2 Nanofibers via Electrospinning and Their Humidity-Sensing Properties
- Near-Infrared Emissions of Sm3+ in Li2O-K2O-BaO-PbO-Bi2O3-Ga2O3 Glasses
- Preparation and Microwave Absorption Properties of Glass Beads /Carbon Fiber with Electro Less Ni-Plating
- Study on Microstructure and Magnetic Properties of Nitrogen-Annealed Nd-Fe-B Nanocomposite Magnets
- Novel Single Walled Carbon Nanotube Based Magnetic-Fluorescent Nanohybrids as Dual-Modal MRI/Optical Imaging Probes
- Microstructure Characterization of Ag Nanoparticles Prepared by Hydrothermal Method
- Study on Application of Super-Resolution Image Reconstruction Method Used in Video Image Processing
- The Research on ODS Iron Powder by Sol-Gel Method
- Influence of Pre-Sintering Temperature and Time on the Properties of YIG Target
- Study of Electronic and Optical Properties of PbS
- Torsion-Impedance in Soft Magnetic Amorphous and Nanocrystalline Wires
- Bismuth-Antimony as an Alternative for High Temperature Lead Free Solder
- Synthesis of Biomorphic ZnO Using Radish Slices as Biotemplate
- An Indirect Boundary Element Method for Computing Sound Field
- The Molecular Structures of Alpha-Brominated 2,5-Dimethyl-Terephthalonitrile Derivatives and the Dependences of Their Yields on the Reaction Time
- Fabrication of Highly Ordered Carbon Networks as Catalyst Supports for Aerobic Oxidation of Glucose
- Effect of Heartwood and Sapwood on Discriminant Analysis of Chinese Fir and Eucalyptus Wood by Near Infrared Spectroscopy
- Structure Design and Research on a Spiral Pipe Type Reactor
- Synthesis and Luminescent Properties of Doped Europium Complexes with 2, 3 - Pyrazine Dicarboxylate
- Preparation of Fe Nanoparticles by Confined Arc Plasma Method
- Design and Research on New Type Office Desk
- Effect of VC/Cr3C2 Additions on Microstructure and Mechanical Properties of WC-16TiC-XTaC-10Co Ultrafine Cemented Carbides
- One-Pot Process for Preparation of Ferrocenylethene Derivatives via Solvent-Free Wittig Reaction
- Dynamics Simulation of Rover Locomotion over Lunar Craters
- Dynamic Simulations of Rehabilitation Move-Assistant Device Based on Adams
- Influence of Eu2+ Doped Contents on the Spectroscopic Features of Sr2-X MgSi2O7:xEu2+
- Resonant Third-Order Optical Nonlinearities of the Stretch-Oriented Cyanine-Dye-Doped Poly(vinyl Alcohol) Films
- Design and Manufacturing of High Concentration Reflected Photovoltaic Module
- Enhanced Two-Photon 3D Optical Storage in a Novel Multibranched-Dye Doped Photobleaching Polymer
- The Mean Projected Range and Range Straggling of Yb Ions Implanted in Silicon Crystal
- Preparation and Characterization of a Novel Optical Material Based on Zinc-Tetraphenylporphyrin
- Preparation and Performance Optimization of a Full Color Organic Light-Emitting Diodes Display Device
- Synthesis, Characterization, and Gas-Sensing for Trimethylamine of Mesoporous Ni-Doped Indium Oxide
- Chapter 6: New Functional Materials
- Experiment and Analyses on 16 Mn Steel under Cyclic Loading Controlled by Strain
- A Kinetic Model of Alumina Inclusion Nucleation in Molten Steel
- Effect of Ultrasonic and Argon-Blowing Treatment on the Nitrogen Content in Low Carbon Steel
- Preparation of Al2O3 Nano-Particles Reinforced Fe-Based Composite Materials via In Situ Synthesis
- Point Clouds Based Dynamical Representation for Heterogeneous Objects
- Research of Ventilation and Dust Removal Technology for Whole Rock Fully-Mechanized Excavation Face
- PWM Chopper of Ultrasonic Power Supply Based on FPGA
- Prediction of Tensile Strength Based on RBF Neural Network
- First-Principles Study of Energy Band Gap of Graphene-Like B-C-N by Strain
- Synthesis of Nanocrystalline Fe25Al57.5Ni17.5 by Mechanical Alloying
- Microwave Synthesis and Characterization of Nanoscale Lanthanum Cobaltite
- Adsorption Kinetics of Cr (VI) onto Strong Alkaline Anion Exchange Fiber from Aqueous Solutions
- Swelling Behaviors of Acrylic-Based Superabsorbent Fibers
- Experimental Research of Energy Harvesting and Storage Based on Ferroelectric Materials
- Physical Properties of Silk Fabric Containing Chitosan and Silver
- CFD Simulation of Hydraulics of Dividing Wall Sieve Trays
- Synthesis and Liquefaction Properties of L-Alanine Hydrosulfate Ionic Liquid
- The Development of Baud Silk Knitted Fabric
- Electrocatalytic Property for H2O2 Reduction of β-Ni(OH)2 Nanosheets
- Absorption of Methyl Orange by Modified Fly Zeolites
- Preparation and Magnetostriction of Epoxy-Bonded Pr(Fe0.4Co0.6)1.93 Composites
- Effect of Deposition Polymerization Technique of Pyrrole on Properties of UHMWPE Fiber
- Hierarchical Porous Hollow Microsphere for Drug Release
- Synthesis and Electrochromic Properties of Soluble Polythiophenes
- Influence of Magnesium Content on Preparation of Aluminum Foam
- A Kind of Heterogeneous Data Synchronous Design for the Internet of Things
- The Electrochemical Behavior of the Rehealing Oxide Scales After Pitting Corrosion
- Multi-Functional Fabric Development and Study on its Performance
- Preparation of Raspberry-Like Polymer/Silica Composite Particles through Cationic Soap-Free Emulsion Polymerization
- Analysis on Vibration Response Based on Suspension Stiffness for Full-Floating Cab
- Monochromatic Red Electroluminescence Based on Copolymer of N-Vinylcarbazole and Eu-Complexed Acrylic Acid
- The Crack-Tip Higher Order Fields of Linear FGM Plates with Reissner’s Effect
- Analysis of a Fluxgate Incorporating Demagnetization Field
- Feasibility Analysis of Development of Imitating Padauk Furniture Industry of Recombinant Bamboo
- Corrosion Inhibition of Carbon Steel in Sulfuric Acid by [BMIm] [Lys] Amino Acid Ionic Liquids
- Dynamic Test of Nitrite Removal by SSI from Wastewater
- Polyaniline/Graphene Composite as Supercapacitor Electrode
- Influence of Reduction Time on Specific Surface Area of SSI
- Kinetic Model of Spherical Sponge Iron Reduced by Hydrogen
- Structure and Magnetostriction of Tb0.7Pr0.3FeX Prepared by Solid-State Synthesis
- Post-Growth Assembly of Nanowires for Integration of Nanodevices
- Study on Lock Mechanism of Coil Strapping Machine
- The Higher Order Crack Tip Fields for Special FGM Functions
- Structural Evolution of Mechanically Alloyed Nanocrystalline Fe25Al50Ni25 Intermetallics
- Study on the Characterization and Controlled Drug Release Carrier of Thiolated Chitosan-Based Nanoparticles
- Study on Synthesis, Characterization and Ultrasonic Degradation the Dyeing Wastewater of 11- MnZrMo Heteropoly Salt with Keggin Structure
- Graphene Oxide and its Applications in Catalysis
- Study on the Evaluation of Minor Rural Road Network Planning Alternative in the State Commercial Grain Base
- Nano-Crystalline Diamond Development and Application
- Martensitic Transformation and Shape Memory Effect of Ni53.25Mn21.75Ga25 Ferromagnetic Shape Memory Alloy
- Dispersion of TiH2 Foaming Agent in Precursors via Melt Route
- Numerical Techniques for Nonlinear Lagrangian Dynamical Systems and Their Application
- Chapter 7: Building Materials
- Structure and Optical Properties of SnS Nanowire Arrays Prepared with Two-Step Method
- Effects of Atmosphere on the Periclase-Hercynite Brick
- Analysis of Vibration Reducing Effects of Cone Shape Materials with Holes Installed on Platforms
- Preparation of Carbon Nanoball from Starch by Arc Discharge
- Study on Light Porous Sintered Material
- Surfactant-Assisted Hydrothermal Synthesis of Multilayered Flower-Like BiOBr with Enhanced Visible Light Photocatalytic Activity
- Study on Structural Plywood Production Technology from Eucalyptus/poplar
- Discussion on the Sustainability of Stainless Steel Applied in Architecture
- Investigation on Oxidation Resistance of the Flint Clay-Andalusite-Silicon Carbide Composite
- Nonlinear Analysis of Eccentric Compression of GFRP Tube Filled with SRHC Columns
- J Integral of Steel Fiber Reinforced High Strength Concrete
- Formation and Specialties of Steel / RC Composite Open-Web Floor Structures
- Research on Antiseptic and Corrosion-Inhibiting Admixture for Concrete
- Experimental Study for Cement Microscopic Property by Backscatter Scanning Technique
- Study on Waterproof and Water-Resistant Properties of Gypsum
- Study on the Thermal Performance of the Vernacular Dwellings in Wei-He Plain of Shaanxi Province
- The Surface Characteristics of Exterior Wall External Insulation System with Foamed Glass in Weathering Resistance Test
- Study on Model Test and Consolidating Mechanism of Piles Thrusted-Expanded in Column-Hammer
- Nanoparticulate Functional Materials: Green Synthesis and Application for the Degradation of Phenolic Compounds
- Study on Life of Concrete Eroded by Seawater
- Preparation of ZnF2 Nano-Particles by Electrochemical Anodization Method
- Dynamic Viscosity Analysis of Base Bitumen with the Addition of Rediset
- Design and Application of Steel Tube Confined Concrete
- Utilization of Cold in-Site Recycling Technology on Distressed Asphalt Concrete Pavement
- Green City Designing Based on Sustainable Development
- Mix Ratio Design and Performance Optimization of Vitrified Microsphere Insulating Mortar
- Experimental Study of External Thermal Insulation Mortar Based on Fly Ash Floating Bead
- Experimental Studies on Abiochemistry Anchor Bolt
- Study the Properties of Mae-Khong Alluvial Gravel Concrete for Producing the Non-Bearing Thin Wall Concrete
- Experimental Research on the Mechanic Performance of the Cavity Wall Material
- Experimental Study on Frost Resistance Properties of Pumice Mixed Aggregate Concrete
- Feasibility Study of Using Desulphurization Slag as Binder Material for Concrete Mixing
- Investigation on Life Products Existence in Porous Asphalt Concrete Using Nano CT Technology
- Discussion on Control of Hazardous Materials in Ship Recycling Activities
- Synthesis of Titania Microshperes with Controllable Diameter Under Solvothermal Conditions
- Lateral Dynamics of Three-Axle Steering Vehicle Based Zero Vehicle Sideslip Angle Control
- Study on Carbonation Resistance of High-Performance Concrete with Large Amount of Fly Ash
- Sustainable Performance of Limestone Cement
- Investigation on the Effect of Silica Fume on Shrinkage Characteristics of Portland Cement-Silica Fume Paste
- Study on Grinding Aids of Different Organic Group
- Early Stage Hydration Process of Hydroxypropyl Methyl Cellulose Ether Modified Cement Pastes
- Study on Sustainable Use of Raw Soil Material in Rural Houses Design in Western China
- A Study on the Correlativity and Date Simulation between Rock Abrastivity and Physical and Mechanical Indexes of Rock in Qingdao Subway, China
- Application of Self-Compacting Concrete in Strengthening of Existing Reinforced Concrete Column
- Influence of Hydrothermal Temperatures on the Structure of BaTiO3 Nanoparticles
- Numerical Analysis of the Wet Deformation for Earth-Rock Dam during Water Storage
- The Growth Mechanism and PL Performance of Bat-Like ZnO Nanorods
- Study on Fluorine Gypsum Block Reinforced by Wheat Straw
- Research on Construction Technology of External Insulation and Economic Analysis of XPS Board External Wall of Pasted Dovetail Groove
- Electrorheological Properties of Ni-Group Nano Particles and Multilayer Compound Polar Molecule Modify
- The Measurement and Theoretical Analysis of Elongation Value of Tensioning Tendon
- Study on the New Wall Insulation Materials of Vitrified Micro Bubbles
- Chapter 8: New Energy Materials
- The Research of Electrolyte on Lithium/Sulfur Battery
- Inkjet Printing Technology for Dye-Sensitized Solar Cells
- Investigation on the Electrochemical Cycle Stability of La–Mg–Ni-based A2B7-type Alloys Prepared by Melt Spinning
- Study on High Quality Polycrystalline Silicon p/n Films Fabrication through Recrystallization by RTP
- Research on the Influence of Electron Beam Parameters on Molten Pool Morphologies during Electron Beam Melting Silicon
- Applicability of Gd0.9Ca0.1AlO3-δ Ceramic Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells
- Kinematics and Dynamics Simulation of Key Components of Wind Turbine
- Preparation of Porous Silicon and Effect of Gettering on the Resistivity
- Silicon Wafer Microstructure Fabrication Using Nanosecond Laser Pulses
- Development of Solid Oxide Electrolyzer Cell (SOEC) Cathode Materials
- Characterization and Preparation of Well-Dispersed TiO2 Nanoparticles by Ultrasonic Microemulsion Method
- High-Temperature CO2 Capture Using MgO/γ-Al2O3 Materials as Adsorbent
- Preparation of Large Size Pyramidal Texture on N-Type Monocrystalline Silicon Using TMAH Solution for Heterojunction Solar Cells
- Preparation and Luminescence Characteristics of Li2Y4-XEux(WO4)7 Red–Emitting Phosphor
- Membrane Potentials across the Cation Exchange Membrane in Aqueous Mixed Electrolyte Solutions
- Preparation and Performance of Gypsum Matrix Phase Change Energy-Storage Material
- Design and Implementation of Assembly Resources Management System Based on Knowledge
- A Simple Hydrothermal Process Based on FePO4•2H2O to Synthesize Spherical LiFePO4/C Cathode Material
- A Study on Anti-Collision RFID Algorithm Based on Interval Estimate Method
- Chapter 9: Environmental Friendly Materials
- Removal of Copper-Cyanide Complexes from Electroplating Industry Effluents by Ion-Exchange Fiber
- Research Advances of Element-Doped Nanocrystalline Titanium Dioxide Thin Films
- The Study of Sodium Alginate Adsorption with PAE as Environmental Friendly Additive for Paper Strength
- Preparation and Adsorption Property of Modified Activated Carbon for Purification of HCN in Closed Carbide Furnace Tail Gas
- Locally Adjusting Operation on Concave Vertexes of Planar Polygon
- Study on Division of Natural Bamboo Fibers by Steam Explosion
- Analysis and Prevention of Pulling Inhibition and Stagnation of Slab Casters
- Effect of Calcination Temperature on the Photocatalytic Activity of Spiel Zn2SnO4
- Effect of Thermal Modification on the Physical Properties of Populus ussuriensis
- Application of Fuzzy Statistical Analysis to Middle School Students’ Perceptions on School Climate
- Dissolution of Cellulose and Synthesis of Cellulose-Graft-Poly (L-Lactide) via Ring-Opening Polymerization in an Ionic Liquid
- Preparation of PLA/Nano-ZnO Composites
- Analysis on Mechanical Properties of Lotus Fibers
- Photocatalytic Degradation of Methylene Blue Using Nano-ZnO at Air Lift Circulating Reactor
- High Performance Iron-Rich Magnesia-Spinel Composite for Burning Zone of Cement Rotary Kiln
- A Study on the Liquid Mulching Film of Lignin
- Study on the Photocatalytic Degradation of Diesel Pollutants over a Sol-Gel Prepared TiO2
- Physical and Mechanical Properties of Inorganic Particles Filled Individual Bamboo Fibers
- Study on the Correlation between the Property of Akund Fiber and its Growing Conditions
- Study on the Photocatalytic Degradation of Diesel Pollutants in Seawater by a Sonochemically Prepared Nano Zinc Oxide
- Study on Carding Processing Length of Akund
- Research on Structure and Properties of Lotus Fibers
- Efficient Destruction of Chlorophenols by Ultraviolet Irradiation
- Study on Compression Behaviour of AZ31 Magnesium Alloy at Room-Temperature
- Adsorption of As (v) from Water by Activated Aluminum Oxide
- One-Pot Synthesis of Mesoporous MCM-41 with Different Functionalization Levels and their Adsorption Abilities to Phosphate
- Research on Special Cement for the Concrete with Ultra-Fine Iron Tailings
- Synthesis and Performance of NaA/MCM-48 Micro-Mesoporous Composite Molecular Sieve
- Optimal Design of Rotation Shaft Torque Testing System
- The Wear Mechanism Comparison between MgO-Based Chrome-Free Brick and MgO-Cr2O3 Brick in the Lower Part of RH Vacuum Degasser
- Synthesis and Application of Water-Borne Nontoxic Emulsion from Wasted Polystyrene Foam
- Study on the Photocatalytic Degradation of Ammonia Nitrogen in Aquaculture Wastewater by Fe3+-Doped Nano-TiO2 under UV Irradiation
- Preparation of Visible Light Response K6SiW11O39SnII for Photocatalytic Degradation of Acid Brilliant Scarlet
- A Study on Engineering Properties of Self-Compacting Concrete Containing Waste LCD Glass
- Relationship between Akund Fibers’ Carding and Sliver Quality
- Chapter 10: Earthquake Materials and Design
- Intelligent Job Shop Scheduling in Auto Blanking Plant
- Clamping Deformation Analysis Research Based on a Flexible Clamping Fixture of Thin-Walled Curved Surface Parts
- Remote Monitoring in Distributed Measurement System Using DataSocket JavaBean and Java Applet
- Axial Compressive Experimental Study on Full-Scale Square Concrete Columns Confined by High-Strength Spiral Hoops
- Path Optimization in Hull Part Cutting Based on Seven Bridges Problems
- Chapter 11: Biomaterials
- The Effects of adhE Deletion on the Metabolism for D-Lactic Acid Production by the Escherichia coli JH11
- Preparation and Characterization of a Bio-Composites Scaffold Containing Nano-Hydroxyapatite /Carboxymethyl Chitosan
- Preparation of Borosilicate Xerogel and Research on its Mineralization
- Fabrication Methods of Porous Tantalum Metal Implants for Use as Biomaterials
- Study on Chain Extension and Modification of Poly(Lactic Acid) by Isophorone Diisocyanate /Polyethylene Glycol
- Reinforcement of Hydrogen Peroxide Bleaching of Bamboo Pulp
- Synthesis and Characterization of a Biodegradable Poly (Glycerol-glycol-sebacate) Terpolymer
- Simulation Analysis of Drive System of Wind Turbine Gearboxes
- Effects of Water Vapor on the Oxidation Behaviors of Cr-Al-N Coatings
- Effects of Vacuum Infusion on Dried Nata Rehydration Ratio
- An Optimized Dynamic Join Query Method for Multi-Hop Wireless Sensor Networks
- Trapping Yeast Cells on PDMS Micropillar Array
- Preparation and Properties of Pullulan Composite Films
- Effect of Inter-Rod Coupling on 1-3 Piezocomposite High-Power Ultrasonic Transducers
- Structural Characteristics of a New Original Bamboo Structure Composite Boards
- Influence of the 2,2-Dimethylol Propionic Acid Content on the Structure-Properties of Waterborne Polyurethane
- Chapter 12: Smart/Intelligent Materials/Intelligent Systems
- Towards Web-Based Adaptive Learning Assistant Approach
- Using Mahalanobis Clustering Algorithm for College Student Learning Fundamental Mathematics
- The Application of Infrared Sensors Integrating Stepper Motor Based on C8051F120
- Research on Teaching Strategy Based on Individual Requirements under E-Learning Environment
- Synthesis and Shape Memory Effect of Poly(Glycerol-Sebacate) Elastomer
- Reserach on the Feeding Model and Residual Error Model of a New Polishing Device
- Rheological Behaviors of Polyacrylonitrile Melt Using Ionic Liquids as a Plasticizer
- Formation Mechanism and Simulation Research on Innovation Clusters
- Shape Memory Effect Improvement and Study of the Corrosion Resistance of the Fe-8Mn-6Si-13Cr-6Ni-12Co Alloy
- Chapter 13: Polymeric Materials
- Microstructure Study on Optimization of High Strength Fly Ash Based Geopolymer
- Influence of Three Diffusion Paths on the Pump Signal in ZrO2-Based NOx Sensor
- The Study on the Reverse Atom Transfer Radical Polymerization of MMA Catalyzed by Acetylacetonate Cobolt(II) Complex Supported by Ionic Liquid
- Slice Spectrum of AR Trispectrum for the Fault Diagnosis of the Hydraulic Control Valves
- In Situ FT-IR Studies on the Catalytic Reaction of Isophorone Diisocyanate with Benzyl Alcohol
- Electronic Effect of Fluoro Substituents on Chromium(III) Complexes bearing β-Diketiminate Ligands for Ethylene Polymerization
- Preparation of Highly Conductive Polyaniline in Carbamide Aqueous Solution Using SnCl4 as Initiator
- Theoretical and Experimental Study on the Crimp Mechanism of Bi-Component Filament
- Study on the Relationship between Nominal Filtration Accuracy and Absolute Filtration Accuracy of the Automobile Engine Oil Filter Materials
- Real-Time Monitoring Device and Method of the Compression Stress of Rubber Materials
- In Situ FTIR Spectroscopy Study on the Crystallization Process of Isotactic Polypropylene in Isotactic Polypropylene/Polyethylene-Glycol Blends
- The Two-Stage Curing Method for Shape-Memory Materials
- Effect of Shear Intensity on Structure and Properties of PA1010/CaCl2 Composites
- Biosorption of Food Dye onto Gelatin Microspheres: Equilibrium Isotherm and Thermodynamic Analysis
- Relationship between Sequence Length and Thermal Properties of Poly(ethylene Terephthalate-Co-4, 4’-Bibenzoate) (PETBB)
- Preparation of Sealing Gasket Resistant to High Temperature and Conducting Oil
- The Formation Mechanism of CH4 on Nitrile Butadience Rubber in Transformer Oil
- Synthesis of Star Cationic Polyacrylamide and its Application in the Retention and Drainage System of Papermaking
- NBR’s Storage Life Prediction Based on the Accelerated Life Test
- Test on Indoor Thermal Environment of Haidong Region in Qinghai Province China in Winter
- Radial Orientation Mechanism and Research of Short Fiber in Extrusion Die
- Effect of Gamma Irradiation Crosslinking on PA6 Fibers
- Application as Papermaking Organic Particulate Retention Agent of Cationic Polymethyl Acrylate Emulsion in Bleached Wheat Straw Pulp
- Preparation and Characterization of a Novel Mixed Functional Cationic Exchange Copolymer Microsphere as Drug Carrier
- Theory Study for Moving Force Identification
- Adsorption of Food Dye onto Gelatin Microspheres: pH Effect in Kinetics and Mechanism
- Morphologies and Properties of Epoxy Resin–Low Molecular Weight Polyamide Curing System Modified with Expanded Graphite
- An High-Performance Water-Based Drilling Fluid and its Application
- Synthesis, Characterization, and Flocculation Properties of Branched Polyacrylamide
- Preparation and Uranium Sorption Performance of Amidoximated Polyacrylonitrile/Organobentonite Nano Composite
- Effect of Carbon Fiber Reinforcement on the Mechanical and Tribological Properties of PA6/PPS Composites
- Study on Synthesis of Cationic Polymethyl Acrylate Emulsion
- Chapter 14: Thin Films
- Soft Magnetic Property of [Fe80Ni20-O/ZnO]n Multilayer Thin Films for High-Frequency Application
- Analysis of Wet Etching Characteristics of a-IGZO Thin Film
- Effects of Substrate Bias on the Microstructure and Properties of a-C:H Films Deposited by MFPUMST
- Preparation and Characterization of Electrospun Poly (3, 3’5, 5’-Tetramethyl-4, 4’-Diaminodiphenyl-Butyltoluene-Co- 3, 3’, 4, 4’-Biphenyltetracarboxylicdianhydride) Nanofiber Membranes
- Effect of Deposition Temperature on Surface Roughness of Nanocrystalline Diamond Film
- Effects of Pulsed Negative Bias and Current Density on Properties of N-Doped TiO2 Films Deposited by Arc Ion Plating
- Preparation of Ultra-High Molecular Weight Polyethylene Microporous Membranes via Thermally Induced Phase Separation
- Microstructure and Properties of Laser Clad Nonmagnetic WC-FeNiCr Metal-Matrix Composite Coating
- First-Principles Study of Electronic Structure of V-Si-N Nanocomposite Thin Film
- Research on the Experiment of ZnO Thin Film by Pulsed Laser Deposition
- A Method of Fault Detection and Diagnosis for Electromagnetic Direction Valve Based on Artificial Neural Network
- Post-Processing and Properties of Polyethersulfone Hollow Fiber Membrane
- Study on the Tensile Fracture Characteristics of Cars Oil Filter Materials
- Preparation and Characterization of TiO2 Photocatalytic Thin Film Prepared by Sol-Gel Dip Coating
- Effects of Ce Doping on the Properties of ZnO Thin Films Prepared by DC Reactive Magnetron Sputtering
- The Characterization of TiO2 Films Prepared by Pyrolysis
- Wuxi Hui-Quan Substation Three-Dimensional Modeling and GIS System Implementation
- Buffer Layer Effects on the Structure and Morphology of SmCo/Cu Thin Films
- Preparation and Mechanical Characterization of Nanocrystalline Diamond Films on Aluminum Oxide Substrates
- Chapter 15: Mechanical Behavior & Fracture
- An Integrated Evaluative Function and Water Bloom Predicting and Prewarning System
- Grey Relational Grade Analysis between Vickers Hardness and Fatigue Crack Growth Data of 2024-T351 Aluminum Alloy
- Studies of Ti-15V-3Cr-3Al-3Sn after Thermohydrogen Processing
- A Fractal Study on Collective Evolution of Short Fatigue Cracks under Various Strain Amplitudes
- Effect of Energy Input of Welding Thermal Cycles on the Cryogenic Toughness of the CGHAZ in Steel 9Ni
- An Investigation on the Shear Toughness for Sn/3.0Ag/0.5Cu and Sn/37Pb Solder Ball Joints
- Size Effects on Biaxially Compressed Stability of Triaxial Weave Fabric Composites
- Study on Mechanism of L-Shaped Concrete-Filled Steel Tubular Columns Subjected to Axial Compression
- Effect of Y and Zn Substitution on Tensile Properties of 6H-Type LPSO Phase in Mg97Zn1Y2 Alloy
- Hardness of Rapidly Solidified Al-High Si Alloys
- In-Plane Crushing of Triangular Honeycomb Cores, Part II: Under Dynamic Loadings
- An Investigation to Added Mass Force on the Wing of Insect Inspired from a Rigid Sphere Model
- GIS-Based Environmental Sensitivity Evaluation for Supporting Scenic Area Planning: Case Study of Lushan-Xihai International Art Park
- Correlation between NDT and Tensile Strength of Structural Larch Sawn Lumber
- In-Plane Crushing of Triangular Honeycomb Cores, Part I: Under Quasi-Static Loadings
- Mechanical Analysis for Laying Thermal Insulation Pipe
- Numerical Analysis of Thermally-Induced Residual Stresses in Beryllium Caused by BeO
- Nonlinear Stability Analysis for FGM Shallow Conical Shells Subjected to Thermal and Mechanical United Loads
- First-Principles Study on the Ideal Strengths of Typical Hcp Metals
- The Influence of Pore Defects Distribution Characteristic on Casting Service Performance and Fatigue Life
- Mechanical Properties of High Strength Concrete Filled Steel Tubular Columns Part 2: Slender Columns and Eccentrically Loaded Columns
- Failure Prediction of Laminated Composites with the Hole under in-Plane Compressive Loading
- Numerical Simulation for Mechanical Behavior of Carbon Black Filled Rubber Composites Based on Plane Stress Model
- Three-Dimensional Elastic-Plastic Constraint Analysis for Side Crack Tension Specimen
- Reliability Design for Allowable Stress of Creep Rupture Strength of 4Cr25Ni35 Steel
- The Two Dimensions Analysis of Localzation Bandwidth in Material Distortion
- Simulation of First Mode Crack Propagation in a Viscoelastic Solid System Fuel Structure Using Crack Length-Temperature Superimposition
- Design for Manufacture and Integrated Manufacturability Evaluation System
- Microstructure and Mechanical Characteristics of the CrN/Si3N4 Multilayered Films Prepared by Sputtering
- Chapter 16: Tooling Testing and Evaluation of Materials
- Analysis on Test Method of Metal Magnetic Memory Mechanism of Ferromagnetic Materials Based Plastic Deformation
- Damage Evaluation of Supercritical CO2 for Hydronibrile Nitrile(HNBR)
- The Application of Multiaxial Fabric Blower Blade and its Strength Theory Check
- Application of Ultrasonic Guided Wave Method for Flaw Detection in Coal-Fired Power Plants
- Monitoring and Characterization of Chemical Shrinkage during Curing in a RTM Resin
- Failure Analysis of Hard Alloy Roll Rings and their Repairing Technology
- Characterization of Wafer Surface Topography after CMP
- The Deduction and Application of Correction Formulas of Three-Dimensional Residual Stress with Layer Stripping Method
- Equilibrium Automatic Wind Door and Electronic Control System
- Spectroscopy Methods in Analysis of Mineral Composition
- Preparation and Activity of Ionic Liquid Catalysts Grafted on Hydrophobic Silica Gel
- Analysis of Volatile Organic Compounds in Disposable Food Packages at Three types of Temperature
- An Improved Standard Addition Method for Material Components Analysis
- Study on Behavior of Geosynthetic Reinforcement in GRPS Embankment
Les mer
Produktdetaljer
ISBN
9783037853719
Publisert
2012-03-28
Utgiver
Trans Tech Publications Ltd
Vekt
5500 gr
Høyde
240 mm
Bredde
170 mm
Dybde
140 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
2790