Produktdetaljer
ISBN
9783035715484
Publisert
2020-11-05
Utgiver
Trans Tech Publications Ltd
Vekt
1070 gr
Høyde
240 mm
Bredde
170 mm
Dybde
28 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
556
The presented collection “Fuel Cells” consists of some selected proceedings papers published by Trans Tech Publications Inc. within the 2017 – 2019 period. It includes a wide range of engineering solutions and results from scientific research activities in the fuel cells area.
Les mer
Aggregated Book
Aggregated Book
- Preface
- Chapter 1: Proton Exchange Membrane Fuel Cells (PEMFC)
- Facile Fabrication of Bimetallic PtCo Nanoparticles Supported on Three-Dimensional Reduced Graphene Oxide by Ultrasonic-Assisted Method for Oxygen Reduction Reaction
- MOF Derived Catalysts for Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cell
- The Influence of Gas Diffusion Media Morphology on Hydrogen Fuel Cell Performance
- Ionic Transport in Sol-Gel Derived Organic-Inorganic Composites
- On Computational Model of Nafion Membrane with Molecular Dynamic Method
- MD Analysis of Effect of Relative Humidity on Molecular Chain’s Network Structure of PEM
- Morphological and Thermal Characterization of Nafion/CNT/PVA Nanocomposite Membranes
- Synthesis and Characterization by Ellipsometry of Cationic Membranes for Fuel Cells
- Hydration Behaviour of Sufonated Polyetheretherketone (SPEEK) Membranes
- A Study on Acidification and Intercalation of Illite Clay Minerals and their Potential Use as a Filler in SPEEK Composite Membranes
- Synthesis and Characterization of Sulfonated PVDF TiO2-Natural Zeolite Nanocomposites Membrane
- Effects of Natural Clay on Ionic Conductivity, Crystallinity and Thermal Properties of PEO-LiCF3SO3-Natural Clay as Solid Polymer Electrolyte Nanocomposites
- Research Regarding Molding of Fuel Cell Bipolar Plates Made of Polymeric-Carbon Composites
- Expanded Graphite/Epoxy/Aliphatic Amine Composites for Bipolar Plates Applications in Polymer Electrolyte Fuel Cells
- Lightweight Titanium Metal Bipolar Plates for PEM Fuel Cells
- Numerical Study on the Influence of Cathode Flow Channel Baffles on PEM Fuel Cell Performance
- Metal-Foam Bipolar Plate for PEM Fuel Cells: Simulations and Preliminary Results
- Thermodynamic Analysis of the Performance of an Irreversible PEMFC
- Chapter 2: Direct Methanol Fuel Cells (DMFC)
- Use of Carbon Nanomaterials as a Catalyst Support in Fuel Cells
- Calcium-Doped Y114 Layered Cobalt Perovskite, a Promising Anodic Material for Direct Methanol Fuel Cell
- Microfluidic Synthesis and Electrochemical Performance of Ternary Metals Nanoalloy: FePtSn
- Preliminary Study of ABS/Chitosan Blend Polymer for DMFC Membranes
- The Morphology Effect on the Selectivity of SPEEK/ENR Membranes for Direct Methanol Fuel Cell
- Effects of SPEEK/Cloisite Concentration as Electrospinning Parameter on Proton Exchange Membrane for Direct Methanol Fuel Cell Application
- Experimental Study on the Performance of DMFC Using Novel Composite Materials of Polypyrrole-Coated Polypropylene as BPs
- Chapter 3: Microbial Fuel Cell (MFC)
- Chemical Etching of TiO2 Nanorods Greatly Improves Current Generation of S. loihica PV-4 on a Carbon Paper Electrode
- Pre-Immobilization of Anaerobic Mixed Culture on Electrode of the Upflow Bio-Filter Circuit Microbial Fuel Cell
- Potential of Palm Oill Mill Effluent (POME) as Growth Medium for Sulfate-Reducing Bacterium in Microbial Fuel Cell
- Electricity Production from Organic Wastes Fermentation by Microbial Fuel Cell Process
- Design and Implementation of Microbial Fuel Cell Using Carbon Paste Electrode
- Chapter 4: Solid Oxide Fuel Cells (SOFC)
- Symmetric Electrodes for Solid Fuel Cells Based on Sr-Doped LaFe0.7Ni0.3O3-δ
- Synthesis, Structural and Thermal Properties of Layered Perovskites SmBaMn2O5+d for SOFCs Applications
- Fabrication of the Anode Supported Solid Oxide Fuel Cells by Tape-Casting Process and Infiltration Method
- Investigation on the Performance and Durability Behavior for the Anode-Supported Solid Oxide Fuel Cell with Composite Cathodes
- A Simulation of Ferroelastic Phase Formation by Using Phase Field Model
- Conductivity Characterizationof Iron Oxide Doped 8 mol% Yttria Stabilized Zirconia
- Effect of Niobium Doping on the Properties of Yttria-Stabilised Zirconia for Solid Electrolyte in Solid Oxide Fuel Cell
- Effect of Precursor Grain Size on the Sinterability and Conductivity of Commercial Yttria-Stabilized Zirconia as Solid Electrolyte
- Morphological and Structural Characterization of YSZ Thin Film Fabricated by Electrophoretic Deposition on LSM/YSZ Substrate
- Effect of Pulse Frequency on the Deposition of Cu-Fe Alloy via Pulsed Current Electrodeposition Method
- Synthesis and Characterization of LaCr1-xSnxO3 Nanopowders (x = 0 and 0.1)
- Fabrication of (MnxCo1-x)3O4 Coated Stainless Steel AISI 430 by Electrodeposition with AC+DC Signals
- Chromia Evaporation of Ferritic Stainless Steel AISI430 Coated by (La,Sr)CrO3 Perovskite and Mn-Co Oxide Spinel
- Residual Stress Depth Distributions for Atmospheric Plasma Sprayed MnCo1.9Fe0.1O4 Spinel Layers on Crofer Steel Substrate
- Barium (Zinc) Borosilicate Sealing Glass and Joining Interface with YSZ Electrolyte and Crofer22APU Interconnect in SOFCs
- BaO-Al2O3-SiO2-B2O3 Glass-Ceramic SOFCs Sealant: Effect of ZnO Additive
- Influence of Bi2O3 on Crystalline Phase Content and Thermal Properties of Åkermanite and Diopside Based Glass-Ceramic Sealant for SOFCs
- Material of High Temperature Heat Exchanger in Fuel Cell System
- Chapter 5: Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFC)
- Electrical Conductivity of NiO-Gadolinia Doped Ceria Anode Material for Intermediate Temperature Solid Oxide Fuel Cells
- Ni0.75Fe0.25 Coated Tubular GDC Anode for Cathode-Supported IT-SOFC with High Anode Porosity
- Preparation of Nano-Structured Cathode for Proton-Conducting Fuel Cell by Dispersing Agent-Assisted Sol-Gel Method
- Effects of Milling Speed and Calcination Temperature on the Phase Stability of Ba0.5Sr0.5Co0.8Fe3-δ
- Structural and Electrical Properties of Barium Strontium Cobaltite Nanoparticles Synthesized by Wet Chemical Methods
- The Investigation of Perovskite LaCo0.6Ni0.4O3-δ as Cathode Interface Contact Material for Intermediate Temperature Solid Oxide Fuel Cells
- Synthesis of La2NiO4+δ Nanofibers by Electrospinning Method and their Application
- Sol-Gel Synthesis of Solid Solution Based on Cerate-Zirconate Ceramics
- Synthesis and Characterization of Sm1-xZrxFe1-yMgyO3 (x, y = 0.5, 0.7, 0.9) as Possible Electrolytes for SOFCs
- Synthesis of La10Si6-2xBi2xO27-x as Possible Electrolyte Materials for Solid Oxide Fuel Cells
- Synthesis and Characterizations of Y-Doped BaCeO3 Ceramic for Use as Electrolyte in Solid Oxide Fuel Cell
- Conductivity of Yittria-Stabilized Zirconia Nanostructure Electrolyte for Solid Oxide Fuel Cell Application by Using RF Magnetron Sputtering
- Fabrication of YSZ/SNDC Bilayer Electrolytes by Spark Plasma Sintering
- Synthesis and Conductivity Investigation of Cu Doped Apatite Type Lanthanum Silicate Electrolyte
- Bi Doping Effect on the Conductivity of Lanthanum Silicate Apatite
- Enhanced Ionic Conductivity in Ce0.8Gd0.2O2-δ Nanofiber: Effect of the Crystallite Size
- Preparation and Property of LSGM-Carbonate Composite Electrolyte for Low Temperature Solid Oxide Fuel Cell
- Advanced Microstructural Investigations of AISI 441 Early Stage Oxidation in Wet Atmosphere
- Performance Characteristics of Solid Oxide Fuel Cells with YSZ/CGO Electrolyte
- Chapter 6: Hydrogen Production and Storage
- The Design and Performance Study of Polymer Electrolyte Membrane Using 3-D Mesh
- Moisture Elimination of the Wet Hydrogen Gas Using the Electrochemical Hydrogen Compressor with a Modified MEA Composition
- Effect of NaOH Concentration on the Formation of TiO2 Nanotube Arrays by Anodic Oxidation Process for Photoelectrochemical Cell
- Surface Engineering of Metal Oxide Photoelectrodes for Improved Band Alignment in Solar Water Splitting Cells
- Engineering Solutions in Scale-Up and Tank Design for Metal Hydrides
- Chapter 7: Some Aspects of Implementation Fuel Cells into Power Supply Systems
- Model of a Power-to-Gas System with Fuel Cell in a Mixed Integer Linear Program for the Energy Supply of Residential and Commercial Buildings
- Renewable Hydrogen-Based Energy System for Supplying Power to Telecoms Base Station
- Hydrogenous Fuel as an Energy Material for Efficient Operation of Tandem System Based on Fuel Cells
Les mer
Produktdetaljer
ISBN
9783035715484
Publisert
2020-11-05
Utgiver
Trans Tech Publications Ltd
Vekt
1070 gr
Høyde
240 mm
Bredde
170 mm
Dybde
28 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
556