Selected peer-reviewed full text papers from the 7th International Conference on Industrial Engineering (7th ICIE)

Selected, peer-reviewed papers from the International Conference on Industrial Engineering (ICIE 2021), May 17-21, 2021, Sochi, Russian Federation

• Preface
• Chapter 1: Metals and Alloys, Metallurgical and Metalworking Technologies
• The Formation Energy of Martensite Nuclei and the Phase Transition Kinetics under the Action of an External Magnetic Field
• Research of Alternative Options for Strengthening Surface Treatment of Cast Iron Products
• Predicting Strength of Titanium Alloys Using Aluminum and Molybdenum Equivalents at Operating Temperatures
• Mechanism of EDM Intensification at Ultrasound Application
• Investigation of Uneven Properties of Stainless Steel 12Kh18N10T Depending on the Thickness of the Sheet
• A Study of the Influence of Local Heat Treatment on the Structure of Welded Titanium Pipelines
• Truck Synchronizer Rings Recovery by Plastic Deformation Technology
• Aspects of Superplasticity of Metals
• Analysis of Remagnetization Processes of High-Anisotropic Alloy after Heat Treatment
• Enhancing Mechanical Properties of Various Sintered Pellets with Nano-Additives
• On Question of Metals’ Plasticity
• Application of the Hydraulic Diameter of Interdendritic Space for Calculating the Ultimate Tensile Strength of Gray Cast Iron
• Strains under Angular Pressing of a Strip from a Cylindrical Billet
• Application of Thermodynamic Modeling for Optimization of the Composition of Nanostructured Low-Alloyed Hafnium Bronzes by High-Pressure Torsion
• Study of the Main Reasons for the Consumption of Graphite Electrodes in Electric Arc Steel Furnaces
• Improving Efficiency of Rolling Production by Predicting Negative Technological Events
• Relationship between Kinematic Viscosity and Cluster Size in Multicomponent Metal Melts
• Analysis of Defects at Laser Welding of Heat-Resistant Alloy KhN45VMTYuBR
• Development of a Mathematical Model for a Workpiece Heating and Cooling in a Protective Medium while Treatment under Pressure
• Microstructure Evolution and Mechanical Properties of Titanium Nickelide during Pressing in Equal-Channel Angular Matrix with Quasi-Small Angle of Channels Intersection
• Nickel-Based Slag-Remelted Superalloy for Ti-Alloys Isothermal Forging Die-Tool
• Explosive Stamping Goals and Objectives Historical Transformation (to the 70th Anniversary of KhAI Scientific School)
• Determining the Metal Corrosion Rate by Various Techniques and Comparison of the Results
• The Study of the Metal’s Flow Distribution during Rolling in Cutout Strikers for Different Schemes of the Stress State
• Simulation of New Multilayer Waveguides by Explosion Welding
• Research the Effect of Speed Mismatch during Continuous Rolling on the Plasticity Margin
• Structure and Phase Transformations in High Nitrogen and High Interstitial Steels of Different Alloying Systems - Short Review
• Technology of the Contact Wire Manufacture for High-Speed Railways
• To the Issue of Low-Alloyed Copper Alloys for Contact Wires
• Specific Features of Statistical Analysis of Relative Grain Boundary Energies Obtained by Scanning Tunneling Microscopy
• Development of Advanced Technologies for the Production of Innovative Materials with a Submicrocrystalline Structure by Methods of Severe Plastic Deformation
• Effects of Heat Treatment on Microstructure Parameters, Mechanical Properties and Cold Resistance of Sparingly Alloyed High-Strength Steel
• Liquation and Crystallization Cracks in Aluminum Alloy AA2024 during Selective Laser Melting
• The Repair of Defects in High-Manganese Steel Castings by Welding Technology
• Phase Transformations and Microstructure of the Alloyed Steels for Mining Application
• Mechanical Properties of a Mild-Alloy Steel for Aerospace Engineering
• Simulation of Thermal Cooling Curves in the Process to Ordering Alloys by the Monte Carlo Method
• Thermodynamic Analysis of Siderite Ore Carbonate Decomposition Process at Roasting
• Use of Lebedinsky Mining and Processing Works Overburden Chalkstone for Iron-Ore Pellet Fluxing
• Thermal Analysis of Al-5Ti1-1B Ligature
• Study of the Boron Effect on the Physicochemical Properties of Ligatures
• Methodology for Evaluation of Treated Steels and Alloys in Abrasive Processing
• The Degassing Laws for Railway Wheel Steel in a Vacuum Tank Degasser
• Improvement the Round Bloom Continuous Casting Technology at JSC “Ural Steel”
• Solid-Phase Reduction and Separation of Iron and Phosphorus from Manganese Oxides in Ferromanganese Ore
• Theoretical and Experimental Studies of Sulfur and Boron Distribution between the Slag of the CaO-SiO₂-B₂O₃-MgO-Al₂O₃ System and the Metal
• Effect of Basicity and Boron Oxide in Slags of the AOD Process on the Equilibrium Interphase Distribution of Sulfur and Boron
• Influence of Rotary Friction Welding Parameters on Tensile Strength and Length of TMAZ of Dissimilar Welded Joints from 32G2 and 40KhN Steels
• Investigation of the Influence of Ultrasound Action on Diffusion Processes in an Explosion-Welded Bimetal System Cu-Al during Heat Treatment
• Technologies for the Production of Non-Annealed Pellets
• Aging of the OT4-VT23, VT6-VT23, VT19-VT23 Titanium Welded Pairs
• Microstructure, Phase Composition, Physical and Mechanical Properties of Titanium Alloy VT23 Hot-Extruded Tube
• Research of the Process of Production of Steel Square Continuous Billets for Rolling Balls of Large Diameter
• Regularities of the Influence of Substitutional and Interstitial Alloying Elements on the Corrosion Properties of Austenitic Stainless Steels
• Analytical Evaluation of Strengthening, Local Internal Stresses and Microderformations in Welded Joint Metal during Wet Underwater Welding
• Features of High-Temperature Synthesis in Clad Mechanocomposites of Ti-Al System
• Surfacing of Ti-Al System Mechanocomposites by Magnetron Deposition
• Influence of Residual Stresses on the Weld Metal Hardness of 5V Titanium Alloy
• Determining Residual Stresses in Weld Joints of DN 850 Pipes by Spot Drilling Combined with Electronic Speckle Pattern Interferometry
• Modeling a Free Burnishing of a Powder Hollow Cylinder
• Development of Calibration Knives for Hot Cutting Shears
• Chapter 2: Hydrometallurgy and Chemical Technologies
• Hydrogenation of Para-Nitrotoluene on Catalytic Systems Containing Oxides of Rare Earth Elements
• Nickel Sorption from Sulphate Solutions of Oxidized Nickel Ores Leaching
• To the Issue of Mathematical Modeling of the Red Mud Thickening Process
• Refining of Primary Aluminum from Vanadium
• Fine Silver Powders Production
• Fine Copper Powders Production
• Granulometric Characteristics Study for the Particles of the Cu_2-xS - Fe_x+1S System
• Chapter 3: Surface Engineering and Coatings
• Development of Hardening Technology for Oil and Gas Pumping and Compressor Equipment Using Laser Hardening
• The Influence of Friction Deformation on the Microstructure and Hardening of Beryllium Bronze
• Effective Wear Resistance Parameters of Ion-Plasma Tribological Coatings
• Laser Hardening of Stamps in the Conditions of a Large Engineering Company
• Hardness of the Powder Coating PG-CP4 Applied to Steel 40H13 and Subjected Laser Treatment
• Contact Surfaces Preparation in Manufacturing of Bimetallic Strips CuZn10 Brass - C22E Steel - CuZn10 Brass
• Targeted Alternation in Properties of Solid Amorphous-Nanocrystalline Material in Exposing to Nanosecond Laser Radiation
• Multiple Reflow Influence over the FeCoCrAlTiCuNiMo Coating Obtained by Plasma Metallization on its Wear Resistance under Dry Friction
• Friction Coefficient of the Coating PG-CP4 Sprayed to 40H13 Steel by Plasma and Processed by Laser
• Mechanical Properties of Laser Treated Thin Sample of an Amorphous-Nanocrystalline Metallic Alloy Depending on the Initial Annealing Temperature
• The Principle of Choosing the Composition of the Protective Coating for Die Casting Molds
• Application of Multi-Element Targets for the Formation of High Entropy Coatings
• Heat Resistance of Steel N8G6M3FTB Obtained by Surfacing Cored Wire
• Modification of Titanium Surface by Ion Implantation
• Structure and Phase Composition of the Al-Ti System Composites after Heat Treatment
• Evaluation of the Heat Resistance of the Fe-Cr-Al System Coatings
• Formation of the Diffusion Zone in Explosion Welded Composite Cr20Ni80 - AD1 at Liquid-Phase Interaction
• Formation of TiO₂ Coating by the Sol-Gel on Carbon Fibers
• Effective Polymer Protective Coatings
• Effect of Coatings on the Performance of Injection Molds
• Effect of Heat Treatment on the Structure and Properties of the Carburized Layer of the Legs of Three-Ball Drill Bits
• The Surface Hardening of Parts of Liquid Dampers Made of High-Strength Steels
• Sacrificial Protection Efficiency Calculations Based on the Results of Stochastically Simulating the Parameters
• Confirmation of Hydrogen Embrittlement Mechanism for Stress Corrosion Cracking of Gas Main Lines
• Modeling Mechanical Properties of Multilayer Coatings TiAlN
• Chapter 4: Polymers and Composites
• Studies of the Influence of High Temperatures and Aggressive Media on the Performance Properties of O-Rings Used in the Automotive Industry
• Mechanical Properties of Barley Straw/HDPE Composites Produced with Extrusion Process
• The Usage of Modern Inorganic Composite Material in the Design of Insulation of Unheated Smoke-Free Stairwells
• Influence of Fillers on the Viscosity Properties of One-Pack Polyurethane Sealants
• A Study on Chemical Ageing of Composite Ribbed GFRP Bars under Load
• Research of the Mechanical Properties of the Filament from the Percentage of Filling when Prototyping Machine Parts
• Functional Properties of Elastomers Based on Butadiene-Nitrile Rubbers
• Investigation of Deformation Work in Layers of Explosion-Welded Composite Al-Cr-St3
• Mathematical Model for Determining the Colorimetric Characteristics of Composite Materials Based on PLA and Wood Filler
• Experimental Study of Tensile Preloading Influence on the Mechanical Behaviour of Pseudo-Ductile Hybrid Composite under High-Velocity Impact
• Experimental and Computational Study of Ultra-Low-Cycle Fatigue of Fabric-Reinforced GFRP
• To Problem of Filler Failure in Processing of Fiber-Reinforced Materials
• Composite Membranes with a Cellulose Acetate Working Layer on a Nylon Substrate
• Comparative Analysis of the Physical and Mechanical Properties of Composites with Functional Fillers Based on Waste
• Effect of Mechanical Activation and Gamma-Irradiation on Structural-Phase State of Ti-Al-C Powder Reagents
• Mechanical Behavior of Active and Passive Strain Sections in CFRP Laminate under Uniaxial Tension
• Ozone Resistance of Vulcanizates Based on XNB Rubber
• Influence of Tool Blunting on the Value of the Axial Component of the Cutting Force and the Drilling Process
• Chapter 5: Ceramics
• Utilization of Porcelain Tile Polishing Residue
• Felsite in Ceramic Materials Production
• Structure and Phase Composition of Ceramics Made of Powder Obtained by Chemical Dispersion of V95 Alloy
• Magnetic Study on Divalent Ion Substituted Barium Hexaferrites
• Effect of Phosphorus on Crystallization of Alkaline Molybdenum-Containing Borosilicate Glasses
• Thermodynamic Assessment of Phase Equilibria in the SrO-Al₂O₃ System
• Milling Duration Influence on Strontium Hexaferrite Technological Characteristics
• Chapter 6: Materials and Technologies in Opto- and Microelectronics
• Features of Melt Droplet Formation during Electrical Destruction Aluminum Films on the Semiconductor Surface
• Influence of Laser Radiation on Movement of Dislocations in Silicon Single Crystals
• Collection of Laser Ablation Products by Means of an Electrostatic Field
• Pulsed Laser Deposition of Thin-Film Coatings in an Electrostatic Field
• Methods for Properties Analysis of Crystalline Materials Based on Solid Solutions of Silver and Thallium (I) Halides
• Inorganic Composites Luminophors in Lithium-Borate Glasses with Rare-Earth Elements for White-Emitting Diodes
• Chapter 7: Materials and Technologies in Construction
• Fastness of Protective and Decorative Coatings Construction Products and Structures to the Action of Wind
• The Research of Iron Containing Wastes Modification Process of Leninabad Rare Metals Plant
• Hyper-Pressed Composites from Recycling Products of Aerated Concrete Waste
• Improving Water Resistance of Magnesium Binding Substances by the Introduction of Mineral Fillers
• Composite Polymer Coatings for Repair of Concrete Linings of Channels
• Innovational Construction Materials of LLP “EcostroyNII-PV” Production
• Deformation and Strength Characteristics for the Calculation of Structures Based on Fiber-Reinforced Concrete Composites
• Experimental Studies of the Physical and Mechanical Properties of Glued Building Materials Based on Modified Veneer
• Glass-Crystalline Materials of a Cellular Structure, Formed by Vibration Foaming Technology
• Modified Composite Fine-Grained Concrete
• Polymer and Geocomposite Impervious Screen Reliability Assessment
• Assessment of the Mechanism of Adhesive Destruction Coatings
• Industrial Production Technology for Aluminium Paste
• Chapter 8: Materials Properties Measurement and Testing Techniques
• Research of the Wood’s Alloy Crystallization Process Using the Acoustic Method
• Comparison of Non-Destructive Testing Techniques
• The Spectrum of Crystallographic Misorientations of Intercrystalline Boundaries for BCC-HCP Phase Transformation in Additively Manufactured Ti-6Al-4V
• Surface Texture Measurement with Profile Method Using Six-Axis Coordinate Measuring Machine