Produktdetaljer
ISBN
9783038354727
Publisert
2015-06-21
Utgiver
Trans Tech Publications Ltd
Vekt
850 gr
Høyde
240 mm
Bredde
170 mm
Dybde
20 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
400
Collection of selected, peer reviewed papers from the 2015 5th International Conference on Advanced Materials Research (ICAMR 2015), January 7-8, 2015, Doha, Qatar.
The 69 papers are grouped as follows:
Chapter 1: Composites and Specialized Composites;
Chapter 2: Intelligent and Electronic Materials, Magnetic Materials;
Chapter 3: Optics and Solar Materials;
Chapter 4: Novel Researches on Machining and Processing of Materials;
Chapter 5: Synthesis and Characterization of Materials;
Chapter 6: Nanotechnologies: Nanofluids, Nanoribbon, Nano Thin Films;
Chapter 7: Researches on Materials Science and Technology
Les mer
Selected, peer reviewed papers from the 2015 5th International Conference on Advanced Materials Research (ICAMR 2015), January 7-8, 2015, Doha, Qatar
- Preface, Committees and Sponsor
- Chapter 1: Composites and Specialized Composites
- Investigation of Thermal and Rheological Properties of Polypropylene and Montmorillonite (MMT) Nanocomposites
- Mechanical and Tribological Behavior of Bio Polymer Matrix Composites for Biomedical Prosthesis Applications
- Properties of the Ti Void Metal Composites Prepared with Saccharose as a Space Holder and Coated by Hydroxyapatite
- MoS2: Advanced Nanofillers for Polymer Nanocomposites
- Durability Performance of Cement Composites Containing Ground Granulated Blast Furnace Slag
- Possibilities of Using Alternative Materials as a Substitute Binder or Filler into Composites
- Finite Element Analysis of the Mechanical Behaviour of a Reinforced PMMA-Based Hip Spacer
- A Comparison Study of Bonded Composite Repairs of Through-Wall Cracks in Pipes Subjected to Traction, Bending Moment and Internal Pressure
- Polyethylene/Clay Nanocomposites Prepared in an Internal Mixer: Effect of Processing Variable on Mechanical Properties
- Fabrication and Characterization of Biocomposite Using Grewia Optiva Fibre (i.e. Bhimal) Reinforced Polyvinyl Alcohol (PVA)
- Effect of Bentonite and Zinc Borate (ZB) Addition on Recycled Polypropylene Composites against Tensile and Burning Rate Properties
- High and Low Speed Impact Characteristics of Nanocomposites
- Chapter 2: Intelligent and Electronic Materials, Magnetic Materials
- Monte Carlo Simulation Model for Magnetron Sputtering Deposition
- Effects of Sputtering Pressure on Cu3N Thin Films by Reactive Radio Frequency Magnetron Sputtering
- The Role of Twinned and Detwinned Structures on Memory Behaviour of Shape Memory Alloys
- Energy Loss Analysis and Magnetic Properties of Non-Oriented Electrical Steel Cut through Different Technologies
- Fabrication of Hierarchical Flower Shaped PbS Crystals via Hydrothermal and Microwave Routes
- Effect of Cutting Parameters on the Quality of the Machined Surface of Cu-Zn-Al Shape Memory Alloy, SMA
- Modeling of Sheet Carrier Density, DC and Transconductance of Novel InxAl1-XN/GaN-Based HEMT Structures
- Evaporation of Thin Film of Polar Liquid in Presence of Soluble Surfactant
- Anomalous Effect on the Phononic Thermal Conductivity of Silicene Nanoribbon by Hydrogenation
- Chapter 3: Optics and Solar Materials
- Solar Reflective Pigment of TiO2 Nanoparticle Coated on Mica and Thermal Property of its Isolation-Heat Paint
- Influence of Substrate Temperature on the Optoelectronic Properties of CuPc Thin Film
- CdTe/PbTe Superlattice Energy Bands Analysis Using k.p Method
- Parametric Requirements for Optimum Performance of InGaP/GaAs Heterojonction Solar Cell
- Design of a New-Type Electro-Optical Sensor Based on the Total-Internal Reflection Theory in Heterodyne Interferometry
- Synthesis of Anatase and Rutile TiO2 Crystals for High-Performance Dye-Sensitized Solar Cells
- Chapter 4: Novel Researches on Machining and Processing of Materials
- Effect of Asymmetric Rolling with Cone-Shaped Rolls on Microstructure and Tensile Properties of Low-Carbon Steel
- Obtaining and Trademark of Copper Molybdenum Oxide from the CuMoO4 Sample Using Carbon as a Reducing Agent
- Influence of Spindle Speed on Exit Burr Height in Drilling Forging Brass
- Grinding of Austempered Ductile Iron Grade 3 as Function of the Microcrystalline Al2O3 Grinding Wheels Composition
- Effect of Addition of Some Grain Refiners to Zinc-Aluminum 22, ZA22, Alloy on its Grain Size, Mechanical Characteristics in the Cast and after Pressing by the Equal Channel Angular Pressing, ECAP
- A Study on Mechanical Properties of Friction Stir Welded and Electron Beam Welded AA2195 Sheets
- Investigation on the Effect of Geometrical Shape of Cold Direct Extrusion on Commercially Pure Aluminum Alloyed by 4% Cu
- Electrospun Gelatin Fiber Bundles by Self-Bundling Electrospinning
- Cube Texture Formation in Ni-8at.%W Alloy Substrates Effected by the Initial Grain Size of Ingot
- Chapter 5: Synthesis and Characterization of Materials
- Preparation and Characterization of Hydrogels Based on Chitsoan/Polyvinyl Alcohol Blends
- An Experimental Investigation on Specific Heat Capacity and Enthalpy of Al 6061-SiC-Gr Hybrid Metal Matrix Composites Using Differential Scanning Calorimetry
- Synthesis, Characterization, and Antimicrobial Activities of New Organic-Inorganic Hybird Compound Based on Polyoxovanadate and Metal-Schiff-Base Complex
- The Synthesis and Structure of Anodized Titania Nanotubes for Energy Conversion Materials
- UV-Assisted Synthesis of Silver Nanoparticles Using Poly(Acrylic Acid) for Colorimetric Ammonia Sensing
- Synthesis and Characterization of Modified Polydimethylsiloxane Nanomembrane for Chiral Separation
- Blunt V-Notch Brittle Fracture: An Improved Finite Fracture Mechanics Approach
- Numerical Modelling of the Interaction Macro–Multimicrocracks in a Pipe under Tensile Stress
- Chapter 6: Nanotechnologies: Nanofluids, Nanoribbon, Nano Thin Films
- Heat Transfer and Pressure Drop in a Pin Fin Heat Sink Using Nanofluids as Coolant
- Tilted Microlens Fabrication Using Nano-Magnetic Particles
- Interfacial and Demulsification Properties of Janus Type Magnetic Nanoparticles
- Size-Dependent Photoelectrochemical Properties of Nanostructured WO3 Thin Films Synthesized via Electrodeposition Method
- Ultrananocrystalline Diamond/Amorphous Carbon Composite Films Prepared by Laser Ablation of Graphite in Nitrogen and Hydrogen Atmosphere
- Thermal Conductivity of Silicon-Graphene Nanoribbon (SiGNR): An Equilibrium Molecular Dynamics (EMD) Simulation
- Molecular Dynamics Simulation of the Thermal Conductivity of Silicon-Germanene Nanoribbon (SiGeNR): A Comparison with Silicene Nanoribbon (SiNR) and Germanene Nanoribbon (GeNR)
- Chapter 7: Researches on Materials Science and Technology
- 2-(Methacryloyloxyethyl) Trimethyl Ammonium Chloride Grafted onto Natural Rubber in Latex State
- Nonlinear Multiresponse Parameter Estimation Using Simplex Optimization Method
- Effect of Biogas Volume Flow Rate and Burner Temperature on Moisture Content of Organic Fertilizer in a Rotary Drying Process
- Electroactive Polymer Actuator Based on PVDF and Graphene through Electrospinning
- Improvement of Geotechnical Characteristics of Clay Soils Using Lime
- Physical Parameters Affecting on the Electrode Performance for Proton Exchange Membrane Fuel Cells (PEMFCs)
- Plastic Waste in Cement Concrete, LDPE and PVC Introduction Effect
- Wettability-Based Colorimetric Test Strips for Gasoline/Oil Mixture Differentiation
- A New Organic-Inorganic Hybrid Based on L-Arginine and Polyoxoanion
- Improvement and Control of Cement Slurry Formulation Resistant to the Critical Conditions HPHT
- Fly Ash/Blast Furnace Slag Geopolymer Repair System as a Sustainable Solution for the Maintenance of an Existing Bridge: Materials Design and Influence on Shear Capacity under Seismic Conditions
- Enhancement of Surface Properties on Films of Waterborne-Polyurethane Hybridized by Highly Dispersed and Aluminate-Modified Silica Sol
- Utilization of Geosynthetic Material Interfaces for Reduction of Cyclic Motion Induced Accelerations
- Use of Graphene Oxide as a Bitumen Modifier: An Innovative Process Optimization Study
- Geometrically Non-Linear Free Vibration of Fully Clamped FGM Skew Plates Using Homogenization Technique
- Notcheffect on J and Amplification of Anisotropic Stress Concentration Factor in a Laminated Plate Subjected to Tensile Load
- Adobe Bricks: The Best Eco-Friendly Building Material
- Evaluation of SEE on a 32-bit Microprocessor by Laser Test and Heavy Ion Test
Les mer
Produktdetaljer
ISBN
9783038354727
Publisert
2015-06-21
Utgiver
Trans Tech Publications Ltd
Vekt
850 gr
Høyde
240 mm
Bredde
170 mm
Dybde
20 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
400