Composite Science and Technology
Heftet /
2011
/ Engelsk
Produktdetaljer
ISBN
9783037850596
Publisert
2011-06-16
Utgiver
Trans Tech Publications Ltd
Vekt
2500 gr
Høyde
240 mm
Bredde
170 mm
Dybde
63 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1260
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This collection of more than 204 peer-reviewed papers on Composite Science and Technology covers: mechanics of composites, infrastructural composites, non-destructive evaluation and characterization of composites, fracture and fatigue of composites, numerical and mathematical modelling, ceramic matrices, composites, metal-matrix composites, composite manufacturing, polymer composites, smart materials and structures, nano-composites, bio-composites and structural health monitoring. This makes it a handy guide to the state-of-the-art of this field.
Les mer
Selected, peer reviewed papers from the Eight International Conference on Composite Science and Technology (ICCST 8), 22 – 24 March 2011, Kuala Lumpur, Malaysia
- Sponsors, Committees and Preface
- Composite Fracture: Getting to the Heart of the Matter
- Recent Developments in PA6/PP Nanocomposites
- Fabrication and Characterization of Unidirectional Silk Fibre Composites
- Effect of Carbon Black and Fly Ash Fillers on Tensile Properties of Composites
- Producing Particleboard Using of Mixture of Bagasse and Industrial Wood Particles
- Critical Speeds for Carbon/Epoxy Composite Rotors in Spacecraft Energy Storage Applications
- Influence of Polyacrilonitrile (PAN) Concentration on the Mechanical and Physical Properties of Electrospun Fibres
- Manufacture of Composite Panel from Sugarcane Bagasse
- Assessment of Strength Properties of Biocomposite from Oil Palm Frond
- Mechanical Properties of Composite Panels from Rice Husk
- Manufacturing of Wood-Plastic Composite from Completely Recycled Materials
- Rheology and Processing of Ni Based Nano-Composite Pastes for Electronic Assembly
- Immediate and Long-Term Deflection of Carbon Fiber Reinforced Polymer (CFRP) Concrete Beams
- Flexural Performance of RC Beams Strengthened with Different Reinforcement Ratios of CFRP Laminates
- Evaluation of Physical and Mechanical Properties of Paulownia Wood Core and Fiberglass Surfaces Sandwich Panel
- Optimum Condition of Manufacturing Wood-Based Composite from Mixture of Wood Particles/Walnut and Almond Shells
- Microstructure Characterisation of Ag2O3-Bi2O3 Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs)
- A Review of Non-Destructive Thermography Techniques Toward Structural Integrity of Bio-Composites
- Effects of Different Particles Sizes of Graphite on the Engineering Properties of Graphites/Polypropylene Composites on Injection Molding Aplication
- Mechanical and Morphological Properties Evaluation of HDPE/Organoclay Nanocomposites with Various Percentages of NR Content
- Nano-Alumina and Radiation Effect on the Mechanical Properties of High Density Polyethylene/Hydroxy Apatite Composite
- Influence of Crystallite Size on Consolidation of Carbon Nanotube Reinforced AA 4032 Composite Powders by Equal Channel Angular Pressing
- Thermal Free Vibration Analysis of Temperature-Dependent Functionally Graded Plates Using Second Order Shear Deformation
- Optimal Sintering Procedure to Fabrication of Functionally Graded Hydroxyapatite-Titanium
- Processing and Characterization of Palm Fiber-Polypropylene Composites
- Effects of Antioxidants Content on the Physical and Mechanical Properties of Wood Plastic Composites
- Effect of Loading Concentration on the Electrical and Hardness Properties of MWCNT/Epoxy Nanocomposites
- Effect of Wet Oxidation on the Dispersion and Electrical Properties of Multi-Walled Carbon Nanotubes/Epoxy Nanocomposites
- Tensile and Impact Properties of Sugarcane Bagasse/Poly(vinyl Chloride) Composites
- Notch Effect on Discontinuous Fiber Reinforced Thermoplastic Composites
- Fabrication of Porous LSCF-SDC Carbonates Composite Cathode for Solid Oxide Fuel Cell (SOFC) Applications
- Developing Packaging by Using Smart Material which Helps to Realize Spoilage in Yoghurt
- The Effect of Alkali Treatment Mechanical Properties of Kenaf Fiber Epoxy Composite
- Effect of Organic Modification of Muscovite on the Polypropylene Layered Silicate Nanocomposite
- Evaluation of Corrosion Properties of Electroless NiP/Nano-SiC Composite Coatings
- Thermal Properties and Thermal Degradation Kinetics of Polypropylene/ Organomodified Ni-Al Layered Double Hydroxide (LDH) Nanocomposites Prepared by Melt Intercalation Technique
- Analysis of Energy Absorption on Pultruded Composite Tube under Oblique Loading
- Fatigue Life Prediction of Composite Materials: Artificial Neural Networks vs. Polynomial Classifiers
- Investigation on Improvement of Mechanical Properties of Kenaf / E-Glass Fiber Composites by Mercerization Process
- Influence of Cutting Parameters on Surface Roughness for Wet and Dry Turning Process
- Development of Biocomposite Wall Cladding from Kenaf Fibre by Extrusion Molding Process
- Characterisation and Properties of Sintered Recycled Glass Utilising CIP Method
- Nanotechnology in Pulp and Paper Industries: A Review
- Oscillatory and Creep Recovery Test on Nano-Composite Lead-Free Solder Pastes (Nickel and Platinum Powder)
- Progressive Damage Analyses of Composite Laminates Exhibiting Free Edge Effects Using a New Micro-Meso Approach
- Fabrication and Characterisation of La0.6Sr0.4Co0.2Fe0.8O3-δ-SDC Composite Cathode
- LiCF3SO3 – CeO2 Composite Electrolytes Prepared by Sol-Gel Technique: Structural and Conductivity Studies
- Shape Factors for Irregular Glass Reinforced Plastic Pipes – An Analytical and Numerical Approach
- Field Layout of Glass Reinforced Epoxy Pipeline – A Practical Approach
- Cotton-Epoxy Composites: Development and Mechanical Characterization
- Optimizing Processing Parameters and Fiber Size for Kenaf Fiber Reinforced Thermoplastic Polyurethane Composite
- Effect of Hydroxyapatite Reinforced High Density Polyethylene Composites on Mechanical and Bioactivity Properties
- Microanalysis Techniques for the Investigation of Interphases Formed between Thermoset and Thermoplastic Polymers: Scanning Electron Microscopy and Energy Dispersive X-Ray Analysis
- Measurements of Interface Fracture Strength between Fiber-Reinforced Composite Laminates and Thin Surface Films Using the Blister Test
- Influence of Surface Modifications on Interfacial Interaction of Zeolite Filled Polymer Composites
- Studies on Development, Bioactivity and Corrosion Behaviour of Nanostructured Titania/Hydroxyapatite Composite Layer on Cp Ti
- Optimal Design by Elitist-Genetic Algorithm for Maximum Fundamental Frequency of Fiber Metal Laminated Plates
- Fundamental Frequency Optimization of Laminated Cylindrical Panels by Elitist-Genetic Algorithm
- Finite Element Analysis of Fibre Reinforce Concrete Beam Subject to High Temperature by Using EURO-Code Models
- Responses of Aging Treatment to the Behavior of Aluminum Alloy with Addition of 0.02% Zirconium Element
- Poly(vinylidene Fluoride)/Microcrystalline Cellulose Nanocomposites with Enhanced Compatibility and Properties
- Simultaneous Optimization for Multiple Responses on the Compression Moulding Parameters of Composite Graphite – Polypropylene Using Taguchi Method
- Modeling and Analysis of Elastoplastic Impacts on Supported Composites
- PVDF-HFP-NH4CF3SO3-SiO2 Nanocomposite Polymer Electrolytes for Protonic Electrochemical Cell
- Li2CO3 – Al2O3 Composite Solid Electrolytes Prepared by Sol Gel Method
- Measurement on Strain Rate Sensitivity and Dynamic Mechanical Properties of Various Polymeric Materials
- Sandwich Composites of Glass Fibre Panel and Polyurethane/Coconut Coir Foam Core (GFRP - PUC)
- The Study of Biodegradable Thermoplastics Sago Starch
- Cotton Reinforced Biopolymer Matrix Composite: Effect of Curing and Aging Conditions on its Mechanical Properties
- Comparison on Rheology Properties of Polypropylene and Polyethylene as Binder System with Stainless Steel 316L for Metal Injection Moding
- Optimizing the Curing Process of Epoxy-Clay Nanocomposites
- Effect of Mg Content on the Characteristics of Al/SiC Nanocomposite Powders Produced via In Situ Powder Metallurgy Method
- A Semi-Energy Finite Strip Method for Post-Buckling Analysis of Relatively Thick Anti-Symmetric Cross-Ply Laminates
- Large Deflection Behavior of Composite Laminated Plates under End-Shortening and Normal Pressure Loading Using a Semi-Energy Finite Strip Method
- Water Retention in Kenaf/Polypropylene Composites due to Repeated Immersion and Drying Conditions
- The Effect of Aging Temperature on Mechanical Properties of Banana Pseudostem Fiber Reinforced Polymer Composite
- The Behavior of Construction Waste Concrete
- Comparative Study of Physical Properties Based on Different Parts of Sugar Palm Fibre Reinforced Unsaturated Polyester Composites
- Effect of Core Thicknesses on Impact Performance of Thermoplastic Honeycomb Core Sandwich Structure under Low-Velocity Impact Loading
- Boundary Condition Effects on the Parametric Stability of Moderately Thick Laminated Cylindrical Panels
- The Effect of Silane Treatment on Tensile Properties and Morphology of Polypropylene/Recycled Acrylonitrile Butadiene Rubber/Rice Husk Powder Composites
- The Effect of Silane Treatment on Processing Characteristic and Swelling Behavior of Polypropylene/Recycled Acrylonitrile Butadiene Rubber/Rice Husk Powder Composites
- Parametric Study of Automotive Composite Bumper Beams Subjected to Frontal Impacts
- Effect of Sonication Time and Clay Loading on Nanoclay Dispersion and Thermal Property of Epoxy-Clay Nanocomposite
- Variation of Mechanical Properties of Epoxy-Clay Nanocomposite with Sonication Time and Clay Loading
- Investigation on Bending Strength and Stiffness of Sugar Palm Fibre from Different Parts Reinforced Unsaturated Polyester Composites
- Properties of Kenaf Filled Unplasticized Polyvinyl Chloride Composites
- Rheological Behaviour of Polypropylene/Kenaf Fibre Composite: Effect of Fibre Size
- Mechanical and Thermal Properties of Polyamide 6 Nanocomposite Toughened with Epoxidised Natural Rubber-25
- Comparative Study of Fiber Metal Laminates (FMLs) and Aluminum Skins for Polypropylene (PP) Honeycomb Core Sandwich Structure under Low Velocity Impact Loads
- Buckling and Post-Buckling Improvements of Laminated Composite Plates Using Finite Element Method
- Thermal Buckling and Post-Buckling Improvements of Laminated Composite Plates Using Finite Element Method
- Impedance Characteristics of Electrospun Nylon-6/TiO2 Nanocomposite for Humidity Sensor
- A New Self Healing Method in Composite Laminates Using the Hollow Glass Fiber
- Viability of Synthetic Fibers to Replace Steel Wire Mesh in Composite Metal Decks Construction
- Optimization of Injection Parameters Using 16µm Stainless Steel Powder (SS316L) at 63 Vol. %, 63.5 Vol. % and 64 Vol. % Powder Loading by Taguchi Method for Metal Injection Molding
- Preliminary Review of Biocomposites Materials for Aircraft Radome Application
- Fatigue Delamination Analysis of Composite Laminates with a Central Hole Using Interface Elements
- Mechanical and Physical Properties of Cement-Bonded Perticleboard Made from Tea Residues and Hardboards
- Responses of PFRP Cantilevered Channel Beams under Tip Point Loads
- Effect of Nanoclay on the Mechanical and Thermal Properties of Rigid Polyurethane/Organoclay Nanocomposite Foams Blown with Cyclo and Normal Pentane Mixture
- Failure Modes of CFRP Flexural Strengthened Steel I-Beams
- Synthesis of MWCNT-Alumina Hybrid as Composite Reinforcement Using Nickel Catalyst
- Computer Simulation and Experimental Investigation of Solidification Casting Process
- Numerical Aspects of Delamination Modeling Using Interface Elements
- A Review on the Performance of Adhesive Bonding in Polymer Composite Joints
- Nonlinear Free and Forced Vibrations of Symmetric Laminated Panels
- The Partial Replacement of Halloysite Nanotubes (HNTs) and Precipitated Silica by Recycled Poly(ethylene Terephthalate) Powder on Cure Behavior, Tensile Properties and Morphology of Natural Rubber Composites
- The Influence of Recycled Poly(ethylene Terephthalate) Powder on Fatigue Life, Thermal Stability, and Morphology of Halloysite Nanotubes (HNTs) and Precipitated Silica Filled Natural Rubber Composites
- Analysis of MPV Dashboard Using SolidWorks and ABAQUS
- Effect of Flame Retardants on Wood Plastic Composites-HDPE Based
- Residual Strength and Failure Criterion of PP Thermoplastic Honeycomb Sandwich Subjected to Low Velocity Impact
- Mechanical Properties of Carbon Fiber-Reinforced Polypropylene Composites
- Free Vibration Analysis of Composite Sandwich Plate with Viscoelastic Core
- Mathematical Model for Axial Crushing of Hybrid Square Tubes
- Sintering of Fe-TiC Composite Prepared by Carbothermal Reduction of Hematite and Anatase
- Optimizing Processing Parameters for Hybridized Kenaf/PALF Reinforced HDPE Composite
- Effect of Fibre Size and Fibre Loading on Tensile Properties of Hybridized Kenaf/PALF Reinforced HDPE Composite
- Tensile and Flexural Behavior of Hybrid Banana Pseudostem/Glass Fibre Reinforced Polyester Composites
- Retrofitting Pre-Cracked RC Beams Using CFRP and Epoxy Injections
- Flexural Performance of Strengthened RC Beams with CFRP Laminates Subjected to Cyclic Loading
- Experimental and Numerical Investigation of Mixed-Mode Fracture Properties of Woven Laminated Composite
- Large Deflection Behavior of Relatively Thick Functionally Graded Plates under Pressure Loads Using Higher Order Shear Deformation Theory
- A Novel Phenol – Based Composite Production: Features and Characterization
- Mechanical Vibration Technique for Enhancing Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite
- Effect of Quartz-Silicon Dioxide Particulate on Tensile Properties of Aluminium Alloy Cast Composites
- Friction Forces between Sheet Molding Compound Charge and Mold Cavity Surface in Compression Molding
- Free Vibration Analysis of Symmetrically Laminated Fully Clamped Skew Plates Using Extended Kantorovich Method
- Large Amplitude Thermo-Mechanical Vibration Analysis of Asymmetrically Laminated Composite Beams
- Effect of Nanoclay on the Physical-Mechanical and Thermal Properties and Microstructure of Extruded Noncross-Linked LDPE Nanocomposite Foams
- Thermal Buckling Analysis of Moderately Thick Plates Using Functionally Graded Strips
- Polymer Based Filler Materials as Infill for GFRP Pile Connector
- The Effect of Bentonite Clay on Green Compression Strength for Tailing Sands from Old Tin Mines in Perak State, Malaysia for Making Green Sand Casting Mould
- Effect of Electron Beam Irradiation (EB) on Gas Barrier Property of HDPE/EPDM Nanocomposites
- Interfacial Shear Strength of Polylactic Acid-Kenaf Fibre Biocomposites
- Preparation and Thermal Properties of Cellulose/Layered Silicate Montmorillonite Nanocomposites Prepared via Ionic Liquids
- Investigation of Phase Transformation and Structure Evolution of Electrospun Copper Oxide Nanofibers during Thermal Annealing
- Characterization of Tantalum Carbide Reinforced Copper Composite Developed Using Mechanical Alloying
- Effect of Milling Speed on Properties of Fe-NbC Composite Prepared by Mechanical Alloying
- A Wavelet-Based Damage Detection Approach for Acousto-Ultrasonic In Situ Monitoring Systems
- The Influence of Mercerised Kenaf Fibres Reinforced Polylactic Acid Composites on Dynamic Mechanical Analysis
- Investigation of Hardness of Short Abaca (Musa Textile Nee) Fibre-Reinforced High Impact Polystyrene (HIPS) Composites by Response Surface Methodology
- Influence of Processing Aids and Hydroxyapatite as Fillers on Flow Behaviour and Mechanical Properties of Ultra High Molecular Weight Polyethylene/High Density Polyethylene Composites
- Buckling Behavior of General Dome Ends under External Pressure, Using Finite Element Analysis
- Feasibility of Manufacturing a Medium Density Fibreboard Made of 4-Year Old Rubber Tree RRIM 2020 Clone
- Curing Characteristics and Mechanical Properties of Rattan Filled Natural Rubber Compounds
- The Effect of Chitosan Loading on the Properties of Chitosan Filled Epoxidized Natural Rubber Compounds
- Transmission Conditions between Carbon Fiber and Epoxy Matrix for Thin Interphases
- Optimization of Transmission Conditions for Thin Interphases in Composite Materials Based on Colonial Competitive Algorithm
- Investigation on the Microwave Properties of Kenaf and Rice-Husk Fiber Reinforced Pla Composite Utilizing One-Port Coaxial Transmission Line Reflection Method
- Influence of Mixed-Mode Ratio on Delamination Fracture Toughness and Energy Release Rate of Glass/Polyester Laminates
- Experimental and Numerical Investigation of the Mixed-Mode Delamination of PAN Based Carbon/Epoxy Composite Using Modified Arcan Fixture
- Effects of Thickness on Fracture Toughness of Carbon/Polyester Composite
- Simulation of Cracks in Fiber Reinforced Composite Plate
- Effect of a Coupling Agent on Mechanical and Biological Properties of Polyetheretherketone/Hydroxyapatite Bioactive Composite for Prosthetic Medical Device
- Impact Damage Detection in a Stiffened Composite Wing Panel Using Digital Shearography and Thermosonics
- Acoustic Emission Localization in a Composite Stiffened Panel Using a Time Reversal Algorithm
- Multiscale Modeling of Hybrid Composite Structures
- Shell Mould Composite with Rice Husk
- Cotton Reinforced Biopolymer Matrix Composite: Effect of Ultraviolet (UV) on its Mechanical Properties
- Characterisation and Properties of Sintered Glass-Ceramics Produced from Recycling Glass by Using Pressure-Less Method
- Fiber Reinforced Composite Structure with Bolted Joint – A Review
- Development of Novel Polymer Composite Beam Using Ultrasonic Welding Process for Acetabular Cup Prosthesis
- Experimental Investigation and Finite Element Analysis of Dynamic Behavior and Damage of Glass/Epoxy Tubular Structures
- Curing Characteristics, Fatigue Life and Morphological Properties of Natural Rubber Nanocomposites with Halloysite Nanotubes (HNTs)/Carbon Black (CB) Hybrid Filler
- Effects of Processing Temperature and Chemical Treatment on Tensile Strength of Kenaf Fiber - Reinforced Polypropylene Waste Composites
- Damage Evolution in Structural Steel at Different Loading Conditions
- Modeling of Stiffness Reduction of Vibration Conveyor Springs Subjected to Ultra High Cyclic Loading under High Humidity
- Lay-Up Design of Low Wind Speed Composite Turbine Blade
- Effect of Stitching Density of Nonwoven Fiber Mat towards Mechanical Properties of Kenaf Reinforced Epoxy Composites Produced by Resin Transfer Moulding (RTM)
- Synthesis of TiO2/Zno Core/Shell Type Nanocomposite via Sol-Gel Method
- Life Cycle Assessment of Particulate Recycled Low Density Polyethylene and Recycled Polypropylene Reinforced with Talc and Fiberglass
- Differential Cubature Method for Static Solution of Laminated Shells of Revolution with Mixed Boundary Conditions
- Effects of Direct Current and Pulse Electrodeposition Parameters on the Properties of Nano Cobalt Coatings
- Vibration of Nonlocal Euler Beams Using Chebyshev Polynomials
- An Investigation on Relative Post-Buckling Stiffness Variations of Symmetrically Cross-Ply Laminates
- A Preliminary Study on Translational Kinetic Energy Absorption Using Coconut-Fiber (Coir) Sheets as a Potential Impact-Worthy Constituent in Advanced Aerospace Material
- Sugar Palm Fibre-Reinforced Unsaturated Polyester Composite Interface Characterisation by Pull-Out Test
- Doping of Palladium in Silica Nanofibers via Electrospinning and Sol-Gel Synthesize as Hydrogen Storage Material
- Effect of Nickel Composition and Preparation Method for Production of Hydrogen via Glycerol Steam Reforming
- The Influence of Li on the Tensile Properties of Al-Mg2Si Metal Matrix Composite
- Effect of Fiber Loading on the Mechanical Properties of Kenaf Fiber Reinforced Thermoplastic Polyurethane Composite
- Flexural Mechanical Characteristic of Sawdust and Chipwood Filled Epoxy Composites
- Tensile Properties and Micromorphologies of Sawdust and Chipwood Filled Epoxy Composites
- A New Finite Fracture Mechanics Approach for Assessing the Strength of Bonded Lap Joints
- Metal Matrix Composites: Solidification Parameters of Aluminium-11.8% Silicon Alloy Reinforced with Titanium Carbide Particulates
- Parametric Study on Cohesive Element for Composite Fuselage Model
- Manufacturing High Performance Wood Composite Panel from Paulownia
- Kenaf Nanofiber/Polylactic Acid (PLA) Nanocomposite
- Simulation of Thermoset Injection for Bulk Moulding Compounds (BMC)
- Flutter Analysis of a Hybrid Plate-Like Fiber-Reinforced Composite Wing
- Selection of Polymeric Based Material Composite for Fibreglass Boat Components Using Expert System
- Tensile and Thermal Conductivity Properties of Epoxy Nanocomposites Thin Film by Spin Coating Technique
- A Structural Health Monitoring of a Pitch Catch Active Sensing of PZT Sensor on Normal, Damage and Repair Aircraft Spoiler
- Effect of Filler Loading and Coupling Agent on Tensile and Impact Properties of Polypropylene with Oil Palm Ash Composites
- Multisphere Ceramic Composite Concept and its Numerical Study of the Ballistic Response
- A Composite Consisting of a Set of Hexagonal Ceramic Bars - The Numerical Study of the Ballistic Resistance
- Effects of Impregnation Time on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres
- Effects of Impregnation Pressure on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres
- Indentation Analysis of In-Plane Prestressed Composite Sandwich Plates: An Improved Contact Law
- The Influence of Yttrium Rich Intermetallic Phases and Heat Treatment on the Microstructure, Hardness and Wear Properties of Al-15%Mg2Si Composite
- Microstructure and Tensile Properties of Al-15wt%Mg2Si Composite after Hot Extrusion and Heat Treatment
- Vibration Analysis of Thick Arbitrarily Laminated Plates of Various Shapes and Edge Conditions
- Influence of Iron Oxide Nano Particles on Electrospun Poly (Vinylidene Fluride)-Based Carbon Nanofibers on Hydrogen Storage
Les mer
Produktdetaljer
ISBN
9783037850596
Publisert
2011-06-16
Utgiver
Trans Tech Publications Ltd
Vekt
2500 gr
Høyde
240 mm
Bredde
170 mm
Dybde
63 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1260