ICETAT 2016

Selected, peer reviewed papers from the International Conference on Engineering Tribology and Applied Technology 2016 (ICETAT2016), November 4-6, 2016, Taipei, Taiwan

• Preface, Committee, Sponsors
• Effect of Variation of Gap Thickness of the Thrust Bearing on Gap Pressure and Stiffness of the Aerostatic Spindle in Vertical Milling
• Influence of the Spacing of the Partially Porous Aerostatic Journal Bearings and the Rotating Speed on Performance of the Spindle
• The Friction Effects for Contact Force Analysis of Three Axes CNC Machine Tool
• Lubricated Wear of Machinable Lithium Disilicate Glass Ceramic
• Tribological Properties of DLC Coating with Various Zr Target Current
• Preparation and Tribological Property of Plasma Sprayed Adaptive Ni-Mo-Al-Ag-BN Composite Coating
• The Effects of Surface Texturing on Friction Performance under Reciprocating Sliding Condition
• Optimization on Abrasive Wear Performance of Pultruded Kenaf-Reinforced Polymer Composite Using Taguchi Method
• Processing Parameters and Microstructure of 6mm 6061 Aluminum Alloy Joints by Friction Stir Welding
• In Situ Observation of Formation Behavior of Adsorption Film in the Narrow Space Using Surface Plasmon Resonance (SPR) Method
• Tribological Performance Evaluation of Biodiesel Distilled Residue Blended with Fossil Diesel
• Tribology Properties of IGZO Films by the Sliding Contacts of Reciprocating Motion
• An In Situ End-Point Detection System Using Motor Power Signal for Chemical Mechanical Planarization Process
• Development of Mixing Methods of UHMWPE/Carbon Nanotubes (CNT) Composites for Use in Artificial Joints
• Use of Artificial Neural Network (ANN) to Determining Surface Parameters, Friction and Wear during Pin-on-Disc Tribotesting
• Study of Unipolar and Bipolar Hip Prostheses Using Finite Element Simulation: Contact Stress Analysis
• Comparative Study on Nano-Structural and Traditional Al₂O₃-13TiO₂ Air Plasma Sprayed Coatings and their Thermal Shock Performance
• On Transient EHL of a Skew Roller Subjected to a Load Impact in Rolling Bearings
• Corrosive Resistance of HVOF WC Coatings with a Different Binder
• Acoustic Benefits of Ecofriendly Spent Tea Leaves Filled Porous Material
• Effects of Friction Models, Geometry and Position of Tool on Curving Tendency of Micro-Extrusion 6063 Aluminum Alloy Pins
• Effect of Acid Washing of SiC Particles on Dispersing and Friction Properties of Ni-P-SiC Composite Plating
• Tribological Properties of Al₂O₃ Particles Reinforced Ni-P Composite Coating
• The Friction Properties of Polyvinyl Alcohol/Graphene Oxide Hydrogels as Cartilage Replacement
• Development of a Combined Diamond Impregnated Lapping Plate
• Effects of Load, Squeeze Velocity, Viscosity on Pure Squeeze EHL Motion Using Optical Interferometry
• Dynamic Characteristics of Rotor-Bearing System with a Labyrinth Seal
• The Experimental Study on Mechanical Polishing on Materials with Hydrolysis Reaction
• Mechanical Property Improvement Study for Epoxy Carbon Composite Material Modified with CNT and Aluminum Based Clay
• Numerical Modeling of Piston Lubrication with Body Deformation through Modal Reduction Method
• An Experimental Study on Friction and Wear of Polyethylene with Rice-Husk
• Study of the Friction and Wear Behavior of Metal/Polymer-Metal Multi-Material Configurations
• Precipitation Hardening Formation in Mg6Zn0.5Y Alloy as an Engine Block Application
• Mechanical Properties and Friction of AZ31 Magnesium Alloy and Application to the Cylidrical Deep Drawing Process
• Friction Factor of 6061 Aluminum Alloy and Application to the Finite Element Analysis of Wheel Forging
• RETRACTED: Hydrodynamic Simulation of an Orbital Shaking Test for the Degradation Assessment of Blood-Contact Biomedical Coatings
• FEA of a Double-Point Contact Elastomeric Gasket Considering Corrosion of Counterparts and Tilting during Assembly
• Optimal Design of Power Transfer Unit Oil Seal Considering Pressure Drop Generated during Water-Way Driving
• Multi-Physics Analysis of a Magnetorheological Brake with Double Coils Placed on Side Housing