Collection of selected, peer reviewed papers from the 2013 4th International Conference on Information Technology for Manufacturing Systems (ITMS 2013), August 28-29, 2013, Auckland, New Zealand.
The 165 papers are grouped as follows:
Chapter 1: Research and Design of Machine Parts and Mechanisms for Manufacturing Systems;
Chapter 2: Materials Science, Microbiology, Chemical Engineering and Technologies of Materials Exploration and Processing;
Chapter 3: Technologies of Measurement, Monitoring and Detection;
Chapter 4: Computational Methods and Algorithms for Engineering Research and Design;
Chapter 5: Control and Automation of Technological Processes and Manufactures;
Chapter 6: Computer, Communication and Information Technologies;
Chapter 7: Architecture and Civil Engineering;
Chapter 8: Environmental Engineering;
Chapter 9: Engineering Management.
Les mer
Selected, peer reviewed papers from the 2013 4th International Conference on Information Technology for Manufacturing Systems (ITMS 2013), August 28-29, 2013, Auckland, New Zealand
- Preface and Organizing Committee
- Chapter 1: Research and Design of Machine Parts and Mechanisms for Manufacturing Systems
- A Study of Wind Heating System
- Research on the Space Meshing Tooth Profile of Giant Magnetostrictive Harmonic Motor
- Passivity-Based Stabilization of Underactuated Mechanical Systems
- The Material Nonlinear Analysis of Bioprosthetic Heart Valve on Suture Densities
- Effects of Knife Shapes and Cutting Speeds of a Mower on the Percentage Pulverization of Sweet Potato Vine
- Electromagnetic and Vibration Analysis of In-Wheel Switched Reluctance Motor with Notches and Projections for Electric Vehicle Applications
- The Kinematic Design of 2K Type Planetary Gear Reducers with High Reduction Ratio
- A Numerical Study on the Velocity of a Cylindrical Counter Projectile Using LX-14 Explosive
- Design of a Wheel-Propeller Integrated Amphibious Robot and Hydrodynamic Analysis
- Experimental Research on Aerodynamic Characteristics of Large Aspect Ratio Wing in Unfolding Process
- Research the Coiled Tubing Deformation under Internal Pressure and Cyclic Bending
- Energy Analysis of Cooling Water Pump for Variable Loading in Air-Conditioning System
- Research and Design on Mechanical System of Elevator Tower for Safety Devices
- Finite Element Simulations of Thermal Affected Zone during Bone Drilling
- Precision Lifetime Analysis and Grey Prediction Based on Observation Data for Motorized Spindle
- Design of Sledge Based on the Ergonomics
- Spiral Defect Reduction of Hard Disk Drive Media
- Innovative Design of Applying TRIZ Technology to Safety Control of Low-Cost Electric Rolling Door
- Aeroacoustic Characteristics of Cavity and Effect Study of Mesh on Noise Suppression
- Computational Aeroacoustic Simulation of Landing Gear
- Mechanical Design on Finite Element Method for Ring Laser Gyroscope
- A Stable Dual-Wavelengths Fiber Laser Equipped by an In-Fiber Integrated Michelson Interferometer
- Experiment Study on Interference Amount of Rivet Joining for CFRP/Al Components
- Analysis and Testing of Microvibration Produced by Control Moment Gyroscope in Multi-Platform
- Halftoning Method and Reproduction of Color Gamut in Digital Image Output
- Parameter Identification of Reaction Wheel Disturbance Model Based WLS-SVR Method
- Design of Electronic Aviation Oxygen Regulator Structure
- A Novel Method for On-Machine Determination of Slide Motion Errors Considering Thermal Effects
- Study of the Boundary Layer on a Plate Aerodynamically Induced by Multiple DBD Plasma Based on PIV
- Compact Dual-Band Monopole Antenna for Wi-Fi Portable Devices
- Monopole Patch Antenna with Dual Band of 2.4 and 5 GHz Designed for Wireless LAN Applications
- Research on the Nonlinear Finite Element Analysis of Rubber CVJ Boot
- Localization Prototype Research of RCC-M Ejector in Nuclear Power Plant
- The Design, Rapid Manufacture, and Materials of Artificial Porous Bone Structure
- Chapter 2: Materials Science, Microbiology, Chemical Engineering and Technologies of Materials Exploration and Processing
- Microstructure Evolution of Ti-6Al-4V Alloy during High Speed Cutting: An Investigation Using Finite Element Simulation
- Physical and Mechanical Properties of Fired Clay Bricks Incorporated with Cigarette Butts: Comparison between Slow and Fast Heating Rates
- Influence of Roll Rotational Speed on inside Bore and Lamination Defects in Rotary Piercing Large Diameter Heavy Wall P92 Steel Pipe Process
- Effect of the Temperature on Diamond-Like Carbon (DLC) Thin Film Based on LIS
- Experimental Study and Influence Mechanism of the Properties of α-C:H Thin Film at Different Bias Voltages
- Mirror Finishing Method of Electrochemical Polishing and Mechanical Grinding for Cold Rolling Rollers
- The Verification of Material Plastic Flow at Optimal Warm Forging Temperature Using Computer Simulation
- A Marginal Isolation Failure Caused by Thin Film Quality Issue Analysis in a 45nm Logic Process
- Two-Layered Microwave Absorber Laminated with Magnetic Composites for Intelligent Transport System
- Prediction of Surface Roughness in the End Milling Machining Using Fuzzy Rule-Based
- Effect of Y on Microstructure and Mechanical Properties of Aluminium Alloy
- The Chemical Reaction Kinetics Study on Sintering Burden with Different Proportions of Solid Fuel
- Non-Metal Reinforced Lead-Free Composite Solder Fabrication Methods and its Reinforcing Effects to the Suppression of Intermetallic Formation: Short Review
- Compaction Optimization of Sn-Cu-Si3N4 via Powder Metallurgy Route for Composite Solder Fabrication
- Microstructure Refinement of Pure Aluminum by Inoculation with Stainless Steel Powders
- Identification and Analysis of Single- and Multiple-Region Mitotic Protein Complexes by Grouping Gene Ontology Terms
- Numerical Simulation Study on Advanced Water Injection for Fuyang Ultra-Low Permeability Fractured Reservoir
- Studies on Tensile and Water Absorption Properties on Kenaf (Hibiscus Cannabinus) Fibre Mat/Polyester Composite Using Chemical Treatment
- Effect of Different Catalyst Percentages on Mechanical Properties of Kenaf Polyester Composite Treated with Acetic Anhydride Solution
- Molecular Differentiation of Nontuberculous Mycobacterium Isolated from Different Animals
- The Effects of Ag Addition on the Microstructure and Mechanical Properties of TiAlSiN Films
- Construction of Eukaryotic Expression Vector and Expression on Mycobacterium bovis ag85a and mpb70 Genes
- Predicting and Analyzing Lipid-Binding Proteins Using an Efficient Physicochemical Property Mining Method
- Synthesis of Unique Structures of Carbon Nanotube at Anodic Aluminum Oxide Template
- Effects of Growth Time on Morphologies of ZnO Nanorod Arrays
- Effect of Drawing Tubes without Interoperation Recrystallization Annealing on the Orientation of Boundaries Grain – Longitudinal Direction
- Research Progress of Paper-Based Microfluidic Devices
- RETRACTED: The Adhesion Properties of Parylene-C Thin Films
- Microstructure Studies on the Effect of the Alkaline Activators of Fly Ash-Based Geopolymer at Elevated Heat Treatment Temperature
- Study on Mechanism of Seepage Flow of S/P Flooding Fluid
- Fusion Expression on the Esat-6 and cfp-10 Genes of Mycobacterium bovis in Escherichia coli
- Development of a Thin CBN Grinding-Tool by Compound Process
- Conductive Distributed Bragg Reflector Fabricated at Low Temperature
- The Quantitative Analysis of Linear Structure from Remote Sensing Image in Maoping Pb-Zn Deposit, Yunnan Province, China
- Interpretation of Linear Structure from Remote Sensing Imagery in Huize Pb-Zn Deposit, Yunnan Province, China
- Mathematical Modelling the Low-Pressure Nitriding Process
- Microstructure Studies on Different Types of Geopolymer Materials
- Strength of Concrete with Ceramic Waste and Quarry Dust as Aggregates
- Study on the Properties of Oil Palm Trunk Fiber (OPTF) in Cement Composite
- Oxidation Behavior of Steel and Pure Copper at 500-700°C
- Case Study of Online Safety Assessment on Atmospheric and Vacuum Catalysis of Distillation System and Pressure Vessel of Diesel Hydrogen Device Based on RBI Technology
- Chapter 3: Technologies of Measurement, Monitoring and Detection
- Pearl Thickness Measurements from Optical Coherence Tomography Images
- Digital Image Restoration in Microscopic Measurement
- Generation of Geometric Measurement Collision-Free Path for Curved Part
- Measurement of Trap Stiffness of Holographic Optical Tweezers with Fluid Mechanics Method
- Study on the Frequency Bands Applied in Grains' Moisture Measurement
- Profile Estimation of Linear Slide in the Presence of Straightness, Yawing and Rolling Motion Errors
- Study of Real-Time Measurement for Thickness of Coating Film Based on Quartz Crystal Oscillator
- Online Measurement for the Thermal Geometric Parameters of Hot Large Forgings
- Effects of Roughness Strip and Acoustic Sensor Height on Subsonic Boundary Layer by Experiment
- A Numerical Investigation into the Tensile Split Hopkinson Pressure Bars Test for Sheet Metals
- Research of Method for Multi-Component Gas Monitoring Based on Non-Dispersive Infrared Technology
- The Application of Self-Adaptive Wavelet Neural Network in Multi-Layered Structure Ultrasonic Testing of the Solid Rocket-Motor
- Design Fabrication and Experimental Studies of ACFM Testing Instrument
- Chapter 4: Computational Methods and Algorithms for Engineering Research and Design
- Lines of Curvature and Umbilical Points: Computation Method and Applications
- Levy Flight Algorithm for Optimization Problems - A Literature Review
- Cuckoo Search Algorithm for Optimization Problems - A Literature Review
- Glowworm Swarm Optimization (GSO) Algorithm for Optimization Problems: A State-of-the-Art Review
- Firefly Algorithm for Optimization Problem
- Research on the Indoor Location Algorithm Based on RFID
- The Image Segmentation System Based on Gauss Process
- Prediction of Resting-State EEG Using High-Dimensional Patterns
- A New Inexact Smoothing Method for SCLP
- Chapter 5: Control and Automation of Technological Processes and Manufactures
- The Research on Information Architecture and Security Protection of Smart Grid
- Lean Information Management of Manual Assembly Processes: Creating IT-Based Information Systems for Assembly Staff Simultaneous to the Product Engineering Process
- Influence Factors of Networked Control System Performance and Simulation
- Research on the Intelligent Management of Access Control System for Laboratory Center
- Research of Higher Vocational College Scientific Management System Based on Workflow
- Declarative Approach to AGVS Modeling and Cyclic Scheduling
- Study on Vibration Control of a Flexible Cantilever Beam Based on Fuzzy PID
- The Possibilities of the Communication Methods of iCIM 3000 System and their Main Functions
- Improvement of Surface Roughness of Inner Hole for Grinding Machine Using Adaptive Fuzzy Sliding Mode Controller
- New Approach in Design of Automated Assembly Station for Disassembly Process
- Research and Design on Electric Control System of Elevator Tower for Safety Devices
- Research on the Control System of DFIG Wind Generation
- Information Processing and Optimization Control of a Mail Piece Sorting Machine
- Dynamic Analysis and Control of a Quadrocopter
- Chapter 6: Computer, Communication and Information Technologies
- An Approach of Similarity Analysis for Non-Rigid Models Based on Diffusion Map with Thin-Plate Spline
- An Energy Aware Data-Centric Routing Algorithm for WSNs with High Energy Efficiency
- Study on Case-Based Reasoning Decision-Making Model
- Data Dissemination and Visualization Browsing of Digital Map Based on Web
- Resilience to Intentional Attacks of Complex Networks
- Incorporating Podcast in Elementary School Reading Instruction
- The Design of 5.25 GHz Low Noise Amplifier
- Optical 3D Scanning of Cutting Tools
- Brep Model, VOXEL Model, and its Inner Attributes
- Research of Efficiency of Computer 3D Animation
- Key Technologies and Efficiency in Computer 3D Animation
- 3D Animation Technologies and Efficiency
- 3D Character Animation and Efficiency
- Research on OA System Development Platform Architecture of MVC Mode
- Cognition in a Cognitive Routing System for Mobile Ad-Hoc Network through Leaning Automata and Neural Network
- The SVM Based on Reduction Strategy Applied in Bus Passenger Flow Counting
- The Implementation and Application of Modbus Protocol in DC Panel Based on μC/Os-II
- Multi-State Coupling Entropy of Interactive Dynamic Process on Scale-Free Network
- Storage Technology Research on Three Dimensional Flight Track Based on KML and SQL Server
- Photonic Services for Time and Frequency Transmission in the Czech Republic
- Research on the Creation of Small-Scale English-Chinese Parallel Corpus for Manufacturing Systems
- Composite Waveform Design of Phase Coding and Linear FM for MIMO Radar
- A Resource-Oriented Architecture Design for HSE System
- Chapter 7: Architecture and Civil Engineering
- Finite-Element Analysis of Ultrahigh Leaf-Shaped Steel Sculpture
- Optimized Analysis of the Hollow Floor Based on the Niche Genetic Algorithms
- A Study on the Air Flow Characteristic of Apartments According to Layout Form
- Fatigue Performance of Blind Bolt in Concrete-Filled Hollow Section
- LQR Control of Along-Wind Response of a Tall Building
- Tuned Liquid Damper Experiment Using Shaking Table
- Corrosion Pattern for Critical Shear Buckling Load of a Web Panel with Local Corrosion Damage
- Chapter 8: Environmental Engineering
- Spatial and Temporal Variation of Soil Erosion in Guangxi in Recent 20 Years
- Change of Wind Velocity Caused by the Development of Downtown Areas: A Case Study in Jeonju Korea
- Proportional Control of Dissolved Oxygen Concentration of Sewage Water Treatment in Oil Field
- Wavelet ANN Based Monthly Runoff Forecast
- Design of Harmful Ion Analyzer in Drinking Water
- Study on Information Systems Framework of Electricity Production for Cascade Hydroelectric Power Station Group in a River Basin
- Effect of Physical Properties of Porous Combustor on Radiant Output and Fuel-Preheated Efficiency of a Non-Sprayed Porous Burner
- Numerical Analysis on NG Dispersion for LNG Releasing on Water
- Research on Network Characteristics for Urban Water Supply Pipe Network Based on GIS
- Integrated Physical Property Modeling with 3D Visual Technique – A Case Study in Lishui Depression, East China Sea Basin
- Geo-Hazards Monitoring and Early Warning System Based on JSP Technology
- CFD Simulations to Predict Comfort Level of Outdoor Wind Environment for Taipei Flora Exposition
- Establishing Mine Water Supply Network Physical Model Based on the Abnormal Similar Theory
- Chapter 9: Engineering Management
- Importance of Problem Statement in Solving Industry Problems
- Research on Process Management Innovation of Petroleum Drilling Engineering Project Based on Life-Cycle in China
- Interaction between FDI and Agglomeration of Capital-Intensive Manufacturing Industry Using System Dynamics Modeling and Simulation
- Optimizing Maintenance Costs/Reliability of Technical System Using Genetic Algorithms
- Research on the Vehicle Scheduling Problem in Wartime Spare Parts Distribution
- Cutter Suction Dredger Spare Parts Joint Inventory Management Research
- Investment and Financing Scale Analysis Model for Balanced Cash Flow
- Algorithm to Improve Process Robustness in the Assembly & Test Manufacturing Industry A Case Study of the 1064nm Wavelength Laser Mark Equipment
- Production and Preferences to Compatible Solution: Fuzzy Evaluation of Power Sector in Bangladesh
- Analysis on the Effect Factors of the Passenger Transportation Energy Consumption Intensity
- Development Prospect of Unconventional Oil and Gas Resources
Les mer