5th International Conference on Industrial Engineering (5th ICIE 2019) Selected, peer reviewed papers from the 5th International Conference on Industrial Engineering (ICIE), March 25-29, 2019, Sochi, Russian Federation

PrefaceChapter 1: Polymers, Composites, Functional and Building CeramicsKurgan Clays in the Production of Ceramic MaterialsActivity of Zinc Oxide Based Spinels CatalyticPeculiarities of Heat and Mass Transfer in Porous Moistened Mediums at High Thermal LoadsMathematical Modeling of High-Energy Pressing Process of Graphite-Plastic CompositionImproving Construction Engineering Properties of Soils Stabilized by a Cement Binder with Techno-Genic ProductsImprovement of Strength Parameters of Foam Ceramics for Energy-Efficient Enclosing StructuresModeling of the Transition Layer in Ceramic Matrix Composites from Coal Wastes and ClayDetermination of Rational Technological Parameters of Co-Extrusion Processing of Secondary Polymeric Materials by the Method of Physical ModelingReceiving Composite Sorbents for Sewage Treatment on the Basis of Waste of Production and Processing of Micaceous QuartziteImproving the Fungus Resistance of Polymer CompositesTechno-Genic Fillers in the Composition of Modern Polymer PaintsStudy of the Influence of Heat Treatment on the Structure and Properties of Aluminum-Copper Multilayer SystemsInfluence of Plasticizers on the Properties of Fine-Grained Polymer ConcreteAnalysis of Electron Density Distribution in the CuAlO2 SystemProperties of Epoxy-Diane Composites Modified by Techno-Genic FillersQuartzitic Waste, as the Possible Component of the Cement Flooring Composite MaterialInvestigation of Novel Polymer Composites Based on Recycled Multilayer Combined Packaging MaterialsFormation and Corrosion Behavior of Nickel/Alumina NanocompositesReaction of Spot Radioactive Source with the Energy of 661.7 KeV on the Modification in the Structure of Surface Layer of Metal Composite MaterialThe Influence of Fiber Reinforcement on the Properties of the Self-Compacting Concrete Mix and ConcreteStudy оf the Diffusion Interaction between Titanium and Aluminum in the Composition AMg6-AD1-VT1-0 after Rolling with Different CompressionModeling Stress Deformed State Upon Contact with the Bodies of Two-Phase MicrostructureInvestigation of Composition and Technological Parameters of Highly Porous Gypsum Products ObtainingA Study of the Influence of Thickness of Anti-Diffusion Layer on the Structure and Thermal Resistance of Composite А5-Cr-St3Improving the Bio-Resistance of Cement Concretes by Means of Fungicidal Poly-Functional ModifiersStudy of the Influence of Refractories Structure on the Thermomechanical Properties of Tunnel Kiln Equipment LiningStudy of the Suspension Stability of Titanium Dioxide of Anatase Modification for Self-Purifying Fine ConcreteComposition Material for Radiation Protection Based on Modified Disperse Titanium Hydride and Silicate ConnectingThe Effect of Polyvinyl Alcohol on the System of Cement-Free Binding Alumino-Silicate CompositionComposite Materials Based on Plasma Treated Basalt Fibers for Heavy-Duty Concrete ProductsActivating Effect of Aluminum Chloride in the Technology of Poly-Sulfides and Materials Based on themPhysical-Chemical Studies and Evaluation of the Suitability of Chernoyarskoe Deposit’s Diatomite for the Synthesis of Foam GlassCompositions and Properties of Polymeric Concrete with Granulight AdditiveAssessment of Fire Safety of Coatings Based on Silicate Paint SolSynthesis of Ultra-Dispersed Spherical Composite MaterialsProspects for the Development of Building Ceramics, Based on Stale Slags from the Non-Ferrous Metallurgy of OrenburgThe Economic Efficiency of the Development of Dry Mixes with the Supplement Based on Calcium HydrosilicatesFace Ceramic Brick of Soft Molding Based on Opoka-Like Raw MaterialsFine-Grained Polymer-Cement Basalt Fibrous Concrete for 3D PrintingThe Use of Water Treatment Petroleum Sludge in the Manufacture of Ceramic ProductsTo the Question of an Experimental Assessment of the Fatigue Characteristics of a Transversal Metal-Composite CompoundThe Conditions and Results of Ferrite Based on Multicomponent Crystal Formation in High Entropic Oxide SystemsCeramic Bricks of Semi-Dry Pressing with the Use of Fusible Loams and Non-Traditional Mineral Raw MaterialsThe Use of Hard Alloy Waste in Composite Galvanic Coatings for the Restoration of Car PartsRegulation of Electrical, Thermal and Physical Properties of Composites Based on Carbon-Modified Portland Cement MaterialsSimple Universal Kelvin Equation Valid in Critical Point Vicinity, External-Internal State Correction, and their Application in Understanding of Oxygen Capillary Evaporation and Condensation in Mesoporous Silica MCM-41Preparation of Poly-Substituted Crystals with M-Type Hexa-Ferrite Structure Using Melts of the BaO-PbO-SrO-CaO-ZnO-Fe2O3-Mn2O3-Al2O3 SystemThermal Stability of Nano-Crystalline Nickel Electrodeposited into Porous AluminaHeat-Resistant Composite Materials Based on Secondary Material ResourcesProduction of Foam Glass Materials from Silicate Raw Materials by Hydrate MechanismUse of Natural Biopolymers to Create Nanocomposite MaterialsAbout the Possibility of Recycling Water Treatment Sludge in the Wood–Cement Composites ProductionThe Influence of Temperature Testing on the Technical Data of Cementing TechnologyProduction of Hybrid Polymer-Oxide Materials Based on Molybdenum Oxide Compounds Using Transient Electrolysis MethodChapter 2: Steels and Alloys, Metallurgical and Metalworking TechnologiesThe Influence of Cylindrical Specimen Size and Material Properties on the Distribution of Deformation during Torsion TestHardenability and Wear Resistance of Carburized to Hypereutectic Concentrations SteelsThe Mechanical Properties of the Pipe Steel after Rolling at the Plate MillSimulation of High-Speed Cutting Using Deform 3D SoftwareFormation of Bead Shape, Structure and Mechanical Properties of Cold-Resistant High-Strength Steel Produced by Direct Laser Deposition MethodTheoretical Investigation of the Bending Process of the Pre-Strained Metal SheetOn the Role of Gamma-Alpha Transformation in the Increase of the Fracture Toughness of Maraging SteelVerification of a New Torsion Test Method to Study the Rheological Properties of Materials in a Cold StateIncrease of Weld Joint Efficiency of the Combined Band of a High-Speed Rotor of an Electric Machine by Local StrengtheningAdvanced Statistical Analysis of Grain Structure in Single-Phase Materials Nanostructured by High-Pressure TorsionThe Use of a Magnetic Suspension for the Crucibleless Metal MeltingComputer-Simulation of the Billet Shape Change during Helical PiercingStudy of Electromagnetic Effect Parameters Influence on Fluidity of Fine Nd-Fe-B PowderThe Peculiarities of Smelting of Wear-Resistant Cast Iron IChH28N2 in the Induction Crucible Furnace IChT10Calculation of Phase Composition of α- and Near-α- Titanium AlloysHow the Material Thickness Affects 0.08% Carbon Cold-Rolled Sheet SteelInfluence of Thermomagnetic Treatment on the Damping Properties and Structure of Iron-Based AlloysEffect of Hf Doping of Commercially Pure Copper on Evolution of its Microstructure under High Pressure TorsionAbout Impact Strength and Thermal Properties of Steel MeltsThermodynamic Regularities of Nuclei Growth during Crystallization of Metastable AlloysDetermination of Thermo-Physical and Physical Properties of Complex Alloyed BrassIncreasing of Energy-Power Indicators of Mechanical Processing in a Planetary Mill by the Use of a Working Chamber with a Square Shape of the Internal CavityEffect of Friction on Compression Test of Ti-6Al-4V with Open-Cellular StructureInvestigation of the Effect of Oxygen Content in the Auxiliary Process Gas on the Quality and Speed of Laser Cutting of Steel SheetsScientific Approaches to the Development of Titanium-Based Alloys for Medical ImplantsPhase Equilibria in a Liquid Metal of Fe-La-Ce-O System at 1600 °СInvestigation of Sulfatization Mechanism of Iron-Manganese Concretions in Fluidized BedInvestigation of the Austenite Grain Growth in HY-TUF SteelPlastic Twisting of Erect Metal RollerEvaluation of the Friction Factor Influence on the Results of Cross-Wedge Rolling Simulation in Qform SoftwareThe Method of Testing Cylindrical Specimen for Torsion in Order to Determine the Rheological Properties of Materials Sensitive to the Strain RateMicroanalysis of Additive Products from Electro-Erosion Cobalt-Chrome PowdersModeling of Tool for Cold Extrusion of Steel and Tooling with Proportional BandagingPrediction of Blast Furnace Thermal State in Real-Time OperationInfluence of Powder Layer Thickness on Microstructure of Selective Laser Melted TiAl6V4Cast Iron and Steel Smelting in Induction Crucible Furnaces of Industrial FrequencyYoung Modulus at High TemperaturesCrystallographic Peculiarities of β-α Transformation in Brass Induced by Hot ExtrusionDetermination of Contact Pressure during Double-T Section Rolling in Universal Beam GrooveАutomatisation of Calculation Method of Technological Parameters of Wiredrawing with Account of Speed Factor and Material PropertiesAppication of the Complete Material Balance Method to Estimate the Transition of Elements in Flux Cored Arc WeldingThe Effect of Radial-Shear Rolling on the Microstructure and Mechanical Properties of Technical TitaniumEffect of Powder Fraction 09CrNi2MoCu on the Structure and Properties of the Obtained Samples Using the Direct Laser DepositionImprovement of Methods of Calculation of Forces in Hot Strip RollingInfluence of Chemical Composition and Heat Treatment Modes on Mechanical Properties of Titanium Alloy VT22 BarsModifying of the Surface of Products from Cast Iron as the Element of Production ModernizationMethod of Speed Mode Correction of Rolling Pipes in the Reduction MillThe Study of Structure Formation Evolution at High Pressure with a Shear in a Corrosion-Resistant Austenitic-Ferritic Steel 03Kh14N10K5M2YuT with Different Initial StatesProcess Development for Solid Fuel Use at Siderite Ore Roasting in Shaft FurnaceThe Phase Composition of Products from Electro-Erosive Cobalto-Chrome Powders, Obtained by Additive TechnologiesTheoretical Justification of the Longitudinal Rolling Method of the Thick Sheets by the Severe Shear DeformationFeatures of the Use of Equilibrium State Diagrams for Description of Crystal Growth from Metastable MeltsIdentification for Technological Capabilities of Titanium and Aluminum Alloys in Deep Drawing ProcessThe Research of the Possibilities of Using Purge Methods for the Manufacture of Casting Cores from Mixtures Based on Secondary Polymers and Technical LignosulphonatesThe Role of the Primary Structure in the Formation of the Mechanical Properties of Steel CastingsInvestigation of Ti-6Al-4V Alloy In Situ Manufactured Using Selective Laser Melting from Elemental Powder MixtureIncreasing Wear Resistance of Chizel Tools Working Bodies Based on Improving the Metallographic Structure of Grey Cast IronConceptual Approach to Development, Structure Formation and Hardening Micro-Alloyed by Steels for the Metallurgical ToolArc Steel Furnace Operation at Changing Working Space Aerodynamic FlowsComparative Characteristics of Free-Machining Steels of Cr-Mo TypeA Simulation of the Post-Bending Process of the Pipe Billets for Welded Pipe ManufacturingEfficiency Upgrading for Blast Furnace Smelting through Use of Iron Ore Raw Materials with Various Fluxing DegreeDevelopment of Energy Saving Technologies for Steel Wire Heat TreatmentThe Calculating Method of Thinning Pipes Ends before Rolling in the Reduction MillComputer Simulation and Study of the New Forging Technology of Billets in a Step-Wedge DiesThin Sheet Forming with 3D Printed Plastic ToolStaged Local Dissolution of Stainless Steel in Chloride SolutionsEffect of Process Parameters on Quality of Ti-6Al-4V Multi-Layer Single Pass Wall during Direct Laser Deposition with Beam OscillationInvestigation of Grey Iron Primary Structure Influence on Hollow Castings StrengthGrey Cast Iron Strength аs Function оf Primary Austenite Dendrites Volume FractionChapter 3: Surface Engineering and CoatingsThe Effect of Silicon in Al-Si Alloys and Electrical Treatment Modes on Structure and Properties of MAO-CoatingsFormation of Coatings under the Action of Laser Radiation in Liquid MediaCorrosion Resistance of MAO Coatings on Al-Si AlloysThe Application of Catalytic Coatings Ion Implantation MethodKinetics of Diffusion Interaction in Cr15Ni60-AD1 Layered CompositeConnection of the Steel Pipes Having a Polymeric Covering on Internal and External SurfacesStructural Formation in the Zone of Interaction under Laser Processing of Bimetal M1 + VT1-0Researching of Steel Grade Influence on Structure and Properties of Silicate-Enamel Coatings of PipelinesTheory and Practice of Long Products with a Metal Coating ProductionOptimizing the Performance of Electroplating Gas-Cleaning EquipmentMain Directions of the Electrochemical Chrome Plating Process IntensificationDevelopment of Technological Bases for Manufacturing Blanks of Friction Disks with Molybdenum Gas-Thermal Coating for Working in Oil in Units of Transport MachinesStudy of the Micro-Hardness of Anti-Friction Coating after Plastic Deformation in Bimetallic Sliding BearingsComparative Study of High-Chromium Cast Iron Coatings Modified with WС-W2C/Co+B4С+Ni/Al Complexes and Cr3C2/PG-US25 CerametAnalysis of Galvanized Coatings Applied on General Purpose WireFormation of Coatings on Details from Valve Metals Alloys by Micro-Arc Oxidation in Internal Cavities of Counter ElectrodesIncrease Effectiveness of Shaving by Using Wear-Resistant Coatings and Preliminary Modeling CuttingThe Abrasive Properties of Coal Power Plants Ash and Slag MaterialsThe Processing of the Profile Surface of the Work-Pieces, Characterized by Low RigidityWear Resistance and Characteristics of the Friction Surface of Metal Coatings with Nitride-Boride AlloyingChoice of Protective Coating of Metal Molds for Casting Non-Ferrous AlloysMorphology and Properties of Solid Chrome Plating, Obtained by the Galvano-Mechanical MethodFeatures of the Formation of Various Functional Coatings of SHS Mechanical Composites Using Gas Detonation Spraying TechnologyWetting of Low Carbon Steel by High-Entropy Melts CuSnBiPbGa, CuSnBiPbIn and CuSnBiInCd and Formed Structure of Diffusion LayersStudy of Cavitation Erosion-Corrosion Resistance of Thermally Sprayed Ni-Based Coatings Prepared by HVAF ProcessInvestigation of the Influence of Kinematic and Geometric Parameters of the Thermo- Sprayer Location on the Adhesion Strength of Anti-Friction CoatingCavitation Erosion-Corrosion Resistance of Deposited Austenitic Stainless Steel/E308L-17 ElectrodeFormation of Intermetallic Coating on 20880 Steel in the Liquid-Phase Inter-Reaction with AluminumTechnologies and Materials for Boriding of SteelworksMultifractal Analysis of Microstructures after Laser Treatment of SteelsQuantitative Assessment of Dissipative Properties of Superficial Structure of the Steel 25XM Strengthened by Pulse Laser InfluenceStudy of the Influence of Technological Factors on the Surface Structure of Aluminum 6000 Series Alloys IngotsStudy of Metal Surface with Color Image Obtained with Laser MarkingThe Qualitative Assessment of Gas-Thermal Coating’s Cohesive Strength Estimation MethodsInfluence of Phase Composition of Steel on a Damage Rate from Bio-CorrosionChapter 4: Chemical and Hydrometallurgical TechnologiesAn Influence of EAF Dust Calcining Conditions on Zinc Leaching Efficiency in Ammonium-Chloride MediaInvestigating of Nitric Acid Leaching of High-Sulfur Copper ConcentrateStudy of Pyrolysis of Annual Crop Refuse under Reduced PressureArsenic Precipitation from Solutions in Autoclave-Hydrometallurgical Technology of Processing Sulphide ConcentratesStrength Properties of Composite Board Materials Based on Ligno-Cellulose Fiber, Modified by Steam Explosion TreatmentOxygen Passivation of Rhodium and Platinum with Direct Current Polarization in 12 m Hydrochloric Acid SolutionCopper Recovery from Rinse Waters after Ammoniac Etching of Printed Circuit BoardsInvestigation of Stagnant Zones in CentrifugesElectrolytic Behavior of Nickel in Polarization by Variable Asymmetric Rectangular Current in Alkaline SolutionsNew Chemical Fibers Obtained from Wood, Activated by Steam Explosion TreatmentCreating and Studying of Enterosorbent with Harsh-Fixed Antioxidants which Have Enzymatic PropertiesNovel Catalytic Systems Based on Platinum CatalystsThe Role of Surface Phenomena in Modified Cement Dispersions at Studying Poly-Functional Modifiers' Mechanism of ActionStudies on Microwave-Plasma Treatment of Froth Flotation TailingsPressure Leaching of Chalcopyrite Concentrate: Iron Removal from Leaching ResiduesAtomic Layer Deposition of Lithium-Silicon-Tin Oxide Nanofilms for High Performance Thin Film Batteries AnodesBioleaching of Non-Ferrous Metals from Arsenic-Bearing Sulfide ConcentrateInfluence of Polyelectrolytes on the Processes of Structure Formation of Copper PowdersCentrifugation of Interphase Suspension with the Use of SurfactantsPlasma-Chemical Simulation Fragmentation of Chloroform in the Liquid Phase by Direct Electrical DischargesInfluence of Gypsum Binder Phase Composition on Operational and Mechanical Properties of the Hydration ProductProcessing of Used Wooden Slippers by Thermal MethodAn Effect of the Epoxy Cementing Technology on the Deformation of the Optical External Surfaces Made of Quartz GlassThe Effect of Different Oxidants on Extraction of Uranium from Low Grade OrePressure Leaching of Chalcopyrite Concentrate: Ultra-Fine Milling as Process Acceleration MethodInvestigation of Hydrometallurgical Processing of Titanomagnetite Ore Enrichment WasteSodium Lignosulfonate and Sodium Dodecyl-Sulfate Mixtures Influence on Zinc Concentrate Pressure Leaching and Zinc Electro-WinningObtaining of High Quality Iron Oxide from Nitric Acid Leaching SolutionExtraction of Nickel and Cobalt from Nickel Slag Wastes by the Thermo-Diffusion MethodZinc Techno-Genic Formations: Physico-Chemical Features of its ExtractionComparison of Iron and Chromium Reduction from Chrome Ore Concentrates by Solid Carbon and Carbon MonoxideChapter 5: Testing and Controlling TechnologiesQuality Control of Building Materials According to Uncertainty of Measurement and Stability of the Technological Process of ProductionDevice for Testing Pipe BilletIndentation Size Effect during Measuring the Hardness of Materials by Spherical IndenterAnalysis of Fatigue Damage Accumulation in Structural Materials under Quasi-Random LoadDetermination of the Load Carrying Capacity of Honeycomb Panels at Fixing Points under an External LoadEngineering Method for Analysis of the Ability to Strain-Hardening of SteelsImprovement of the Method for the High-Carbon Wire Rod Pearlite Grain Grade IdentificationInvestigation of Magnetic Properties of Various Structural Classes Steels in Weak Magnetic Fields Characteristic for Generation of Thermoelectric Currents in Electron Beam WeldingTest for Anticorrosive Properties of Packing Paper under the Conditions of Increased Humidity and Presence of Chlorides