Produktdetaljer
ISBN
9783037858332
Publisert
2013-11-14
Utgiver
Trans Tech Publications Ltd
Vekt
1400 gr
Høyde
240 mm
Bredde
170 mm
Dybde
37 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
740
Redaktør
Collection of selected, peer reviewed papers from the 2013 4th International Conference on Mechanical and Aerospace Engineering (ICMAE 2013), July 20-21, 2013, Moscow, Russia.
The 127 papers are grouped as follows:
Chapter 1: Aerodynamics and Aeronautic;
Chapter 2: Fluid Dynamics, CFD and other Computational Methods;
Chapter 3: Computational Techniques, Simulation and Numerical Analysis;
Chapter 4: Dynamics and Vibration;
Chapter 5: Motors, Combustion, Propulsion, Fuel and Emission Control;
Chapter 6: Instrumentation and Measurement, Control Systems and Automation;
Chapter 7: Trajectory Design, Navigation and Control;
Chapter 8: Materials Characterization and Technologies;
Chapter 9: Design, Industry and Manufacturing Technologies;
Chapter 10: Thermal Analysis Technologies, Heat Exchange Engineering and Applications.
Les mer
Selected, peer reviewed papers from the 2013 4th International Conference on Mechanical and Aerospace Engineering (ICMAE 2013), July 20-21, 2013, Moscow, Russia
- Preface, Committees and Sponsors
- Chapter 1: Aerodynamics and Aeronautic
- Composite Wing Flutter Speed and Frequency due to Variable Control Surface Deflection in Low Speed Wind Tunnel
- A Study on Performance Comparison of Integrated Aerodynamic-Ramp-Injector/ Gas-Portfire Flame Holder with Cavity
- Control of Leading Edge Vortices Using Apex Flap over Non-Slender Delta Wing
- Unsteady Darcian Natural Convection within Porous Media of Square Enclosure at Various Rayleigh Numbers
- Experimental Study of a Mechanical Flapping Rotary Wing Model
- FE-Modal Approach to Model Geometric Nonlinearities of High Aspect Ratio Wing
- A Numerical Simulation of Parachute Opening Process Based on ALE Method
- Flow Visualized Observation of a Symmetrical Airfoil with Attack Angle in Fluctuating Relative Flow Velocity
- Aerodynamic Design Considerations for In-Flight Refueling of Unmanned Vehicles
- Effect of Forebody Strakes on Wing Rock Motion on a Generic Wing-Body Configuration Having Chine Forebody
- Microgravity Experiment Research on Orbital Refueling Process in the Vane Type Tank
- Simulation Analysis on the Problem of Opening Main Parachute Used in UAV Recovery System
- Chapter 2: Fluid Dynamics, CFD and other Computational Methods
- Numerical Investigation of Water Droplet Impact on Solid Surface in Microgravity
- CFD Analysis of a Hypersonic Vehicle Powered by Triple-Module Scramjets
- A Novel Expression for the Effective Viscosity to Model Squeeze-Film Damping at Low Pressure
- Simulation of 2-D Dam Break Using Improved Incompressible Smoothed Particle Hydrodynamics Based on Projection Method
- CFD Modeling and Simulation of Transesterification Reactions of Vegetable Oils with an Alcohol in Baffled Stirred Tank Reactors
- Experiment Investigation on Fluid Storage Characteristic and Transportation Performance of Propellant Refillable Reservoir in Microgravity Environment
- Design and Tests of Wind-Tunnel Sidewalls for Receptivity Experiments on a Swept Wing
- Couette - Poiseuille Two-Layer Flow of a Third Grade Fluid
- Experimental Study of Pressure Drop after the Circle Grids Fractal Orifice
- Liquid Sloshing Damping Computation in Cylindrical Tank Based on VOF Method
- Aerodynamic Optimization Design of Airfoil Based on Directly Manipulated FFD Technique
- Free Convection Flow of a Nanofluid Past an Isothermal Inclined Plate
- Comparison between Methods of Generation of Waveriders Derived from Streamline Tracing and Simplified Method
- Numerical Simulation of a Low Reynolds Number Airfoil
- Numerical Investigation of Viscous Laminar Supersonic Flow Past an Asymmetric Biconvex Circular-Arc Aerofoil
- Chapter 3: Computational Techniques, Simulation and Numerical Analysis
- A DEA Based Model for Ranking Air Freighters Operational Efficiency
- Numerical Performance Study of Small Size Lifting-Body Reentry Vehicle
- Aspects on the Calculus and Construction of Translation Modules in the Mechanical Structure of an Industrial Robot Possessing Four Degrees of Freedom
- Deterministic and Probabilistic Analysis of Steel Frame Bracing System Efficiency
- Optimal Solving of the Contradictory Problem between Hydraulic Cylinder's Precision and Stability with Extenics Theory
- Artificial Neural Networks for Structural Health Monitoring of Helicopter Harsh Landings
- Numerical Study on Buckling Behaviour of Composite Cylindrical Shells under Axial Compressive Load with Asymmetric Meshing Technique
- Chapter 4: Dynamics and Vibration
- A Study on the Free Vibration of the Prestressed Joined Cylindricalspherical Shell Structures
- Vibration Analysis of Rub in Rotating Machinery
- Vibrodiagnostics and its Application in Manufacturing Practice
- Three-Dimensional Dynamic Behavior of the Flexible Umbilical Cable System
- Numerical Analysis of the Exterior Explosion Effects on the Buildings with Barriers
- Numerical Research on Dynamic Response of Underwater Vehicles in the Vertical Tube-Exit Stage
- Exact Solutions of the Vibration Problem of Beam Structures
- The Study of Elastic Dynamic of the Deployment Mechanism in Large Deployable Reflector
- Buckling Analysis of Inclined Beam-Column Structures by Using Differential Transform Method (DTM)
- Structural Modal Analysis of a New Twin-Rotor Piston Engine
- Mechanical Efficiency of a Mass-Spring System in Hypergravity, Normal Gravity and Microgravity
- 3D Dynamic Hydroelasticity Analysis of Light Weight Pyramidal Sandwich Plates with Imperfection Subjected to Water Impact
- Chapter 5: Motors, Combustion, Propulsion, Fuel and Emission Control
- Off Design Behavior of a 100kW Turbec T100P Micro Gas Turbine
- Lightweight Battery Electric Vehicle for Educational Purposes
- UV-Visible Emission Spectroscopy of the Combustion Process in a Common Rail Cl Engine Fulled with N-Butanol - Diesel Blends
- Technical Characteristics and Applicationconcept of RBCC Engine
- Performance Analysis of Bipropellant Propulsion System on Special Working Conditions
- An Analytical and Experimental Study on Coolant Flow and Temperature Distribution within Pem Fuel Cell Stack
- Numerical Calculation of Air Mass Flow in a Dual-Rotor Piston Engine
- Air Pollution by the Exhaust Emissions from Construction Machinery under Actual Operating Conditions
- Premixed Combustion of a Fine AP/HTPB Composite Propellant Based on Detailed Chemical Kinetics
- Effect of Pilot Injection on Mixture Formation, Ignition Process and Flame Development in Diesel Combustion
- A Review of Ignition Delay and Combustion Characteristics of Biodiesel Fueled Diesel Engine
- Study on Mixture Ratio Control of Bipropellant Propulsion System on Satellite Based on Bypass Control System
- The On-Road Exhaust Emissions from Vehicles Fitted with the Start-Stop System
- Influence of the Mean Friction Pressure on the Temperatures of the Combustion Engine
- Computational Modeling of the Liquid LPG Injection into the Suction Manifold of an SI Vehicle Engine
- A Study on Systematic Procedure for Choosing the Best Powertrain Configuration in Hybrid Sedan Cars
- Contrasting Hot & Cold Testing Technique’s for I.C Engine’s
- The Study of Cavity Flow and Transpiration Cooling in Supersonic Combustion
- Chapter 6: Instrumentation and Measurement, Control Systems and Automation
- Optimal Balancing of a 3-RPS Robot Manipulator Using Genetic Algorithm
- A New Method to Detect Fire and Alarm in Confined Space Based on Electronic Nose
- Ergonomic and General Ground Control Station Design for Unmanned Aerial Vehicles
- Enhancing the Performance of Jet Engine Fuel Controller Using Neural Networks
- Real-Time Dynamic Control of a Stewart Platform
- The Parameter Identification of the Steep Seam Goafs Structural Characteristics of the Coal and Rock Based on GPR
- Compressor Instability: Stall, Surge and their Control
- Analyzing and Control of Drive Mode in a Vibratory Ring Gyroscope
- Control System Integration for Dual Clutch Transmissions Based on Modular Approach
- Bandit Detection System under Unstructed Lighting Condition with Different Discriminant Analysis Approach
- Linear Servo Motor Operating Mechanism and Control Technique for High-Voltage Circuit Breaker
- Nonlinearity of Maglev Actuator and Adaptive Vibration Control Using Improved FxLMS Algorithm
- The Communication Protocol Research of Rail Train Safety Monitoring Sensor Network
- Flow Measurement Wavelet Filtering for Ultrasonic Flow Meter
- Radar Absorbing Material (RAM)
- SCILAB-Based Robust Control Design and Analysis for an Aerospace System
- The Study on Analog Module of Underground Cables Environmental Monitoring System Based on CAN Bus
- The Method for Numerical Simulation of the Impact on the Infrared Radiation Seeker from the Warhead Shock Layer
- Chapter 7: Trajectory Design, Navigation and Control
- Optimal Trajectory Planning for Parallel Robots Considering Time-Jerk
- Trajectory Design for the Transfer from the Lissajous Orbit of Sun-Earth System to Asteroids
- Signal Structure and Simulation of Compass Satellite Navigation System
- Initial Alignment Error and Navigation Error Compensation Methods for SINS/CNS Integration
- Path Planning and Replanning for Intelligent Robot Based on Improved Ant Colony Algorithm
- An Adaptive & Fault Tolerant SINS/GPS Integrated Navigation Scheme Robustified against Slowly Growing Errors in GPS Updates
- GPS-INS Integration Algorithm for Autonomous Vehicle Using Loosely Coupled Integration Architecture
- The Development of GPS Navigation Systems in Civil Aircraft
- Chapter 8: Materials Characterization and Technologies
- Mechanical Properties and Fracture Toughness of Alkali Treated Oil Palm Fruit Bunch (OPFB) Fibre/Epoxy Composites
- On the Scatter of the Fatigue Limit of a Die-Cast Magnesium Alloy
- Moisture Diffusion Characterization of Carbon Fiber Based Polymeric Composites Under Recurrent Hygrothermal Ageing
- Uniaxial Mechanical Response of Polycrystalline Shape Memory Alloys
- Thermo-Mechanical Behaviour of an Innovant Straw Lime Composite for Thermal Insulation Applications
- Investigation of Mechanical Properties and Microstructure of AA2024 and AA7075
- Preparation of TiO2/Bio-Composite Film by Sol-Gel Method in VOCs Photocatalytic Degradation Process
- Characterization of Fracture Properties of Epoxy-Alumina Polymer Nanocomposite
- Damage Induced Anisotropy of Elastic Wave Velocities in Geomaterials under Uniaxial Compression: Numerical Investigation by a Quasi-Micromechanical Approach
- Strengthening and Toughening of Unsaturated Polyester by Using Some Additives in Gear Application
- The Finite Element Analysis for Dimensional Accuracy in Roll Bending of Aluminum-Polymer Laminated Sheet
- Chapter 9: Design, Industry and Manufacturing Technologies
- Tool Selection for Machining of Free Form Surfaces
- Study on Micro Mill-Grinding Technology
- Improved Packing Representation Model for the Orthogonal Packing Problem
- Ecological Performance Analysis of Irreversible Rankine Cycle
- Fatigue Life Prediction of Electronic Chips Based on Singular Edge Field
- A Self-Alignment Sealing Hatch-Door System Updated for Airlock Chambers of KM6 Space Simulator
- Design of an ASIC Chip for Spacecraft Data System
- Management of Parametric CAD Model by External Tools
- Optimization of Multiple Quality Characteristics in Laser Cutting of Difficult-to-Laser-Cut Material
- Studies of Toggle-Lever-Toggle 3-Stage Series Force Amplifying Mechanism and its Applications
- Research of a New Lunar Landing Gear Technology
- Simple Design of a Gravity-Independent Mass Balance
- The Finite Element Analysis of the Rollers in a Rotary Steerable Drilling Tool
- Simulation Analysis of the Effects of Maintenance Policies on Manufacturing Line Productivity
- Chapter 10: Thermal Analysis Technologies, Heat Exchange Engineering and Applications
- ECOP Based Comparative Study of Thermodynamic Cycles
- Influence of Insulated Rectangular Block on Natural Convection Heat Transfer within Porous Enclosure
- Structure Design and Optimization of Vacuum Vessel for Spacecraft Thermal Test
- Experimental Studies of a Ranque-Hilsch Vortex Tube
- Buoyancy Effect on the Wake of a Confined Circular Cylinder during Opposing Laminar Mixed Convection Heat Transfer
- An Analysis of Packed Bed Liquid Desiccant System
- Evaporating Meniscus of Ethanol and Ethanol-Based Nanofluids in Single Micro-Channels
- Review of Passive Downdraught Evaporative Cooling Technique and its Application
- The Thermal Simulation and Control Technology in Spacecraft Vacuum Thermal Test
- Software Development for Satellite Thermal Design
- The Application of IRAs Optimizing Design in Vacuum Thermal Test
- Research on the Thermal Buckling Analysis of the Attitude Liquid Rocket Engine with Film Cooling
Les mer
Produktdetaljer
ISBN
9783037858332
Publisert
2013-11-14
Utgiver
Trans Tech Publications Ltd
Vekt
1400 gr
Høyde
240 mm
Bredde
170 mm
Dybde
37 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
740
Redaktør