Selected peer-reviewed papers from 4th The International Conference on Mechanical Engineering (ICOME 2019)

Selected, peer-reviewed papers from the 4th The International Conference on Mechanical Engineering 2019 (ICOME 2019), August 28-29, 2019, Yogyakarta, Indonesia

• Preface
• The Effect of EDM Process on the Microstructure of CP-Titanium Grade 2 and AISI 316 L in Cardiovascular Stent Manufacturing
• Corrosion Behavior of a Predeformed Fe-Ni Lateritic Steel with Bainite Structure
• Carbon and Nitrogen Composition for Non-Precious Metal Catalyst to Physical Characterization and Electrochemical Properties
• Analysis the Effect of Charcoal Mass Variation to Ni Content, Sinter Strength and Yield on Sintering Process of Limonitic Laterite Nickel Ore
• Direct Reduction of Limonitic Laterite Nickel Ore with Variation Type of Reducing Agents to Fe, Ni Content and Recovery by Using Coal-Dolomit Bed Method
• Effect of Ground Glass Particles on the Water Absorption and Tensile Properties of Epoxy
• The Effect of Acidity and Rotation Speed in Titanium Dioxide Synthesize Process
• Improving of Electric Voltage Response Based on Improving of Electrical Properties for Multiferroic Material of BiFeO₃-BaTiO₃ System
• Effect of Copper Addition on Fatigue Strength Al-10Si Alloys Produced by Die Casting
• Tensile, Flexural and Water Absorption Properties of Bamboo Fiber/Unsaturated Polyester Composites: Effect of Calcium Carbonate Content
• Reliability Evaluation of Fatigue Crack Growth Rate of Heat-Treated TIG-Welded Al 6013-t4 by Two-Parameter Weibull
• Natural Fiber Reinforced Composites as Bulletproof Panel Materials
• Effects of Oil Palm Empty Fruit Bunch and Magnesium Oxide Volume Fraction on Mechanical Characteristics of Railway Brake Block Composite Material
• Effect of Stirring on the Quality of ADC 12 Cast Aluminium Alloy
• Application of Seeds from Psidium Guajava as Organic Inhibitor
• Extraction and Characterization of Nanocrystalline Cellulose (NCC) from Ramie Fiber by Hydrochloric Acid Hydrolysis
• Impact Toughness Characteristics of SM570-TMC Steel Joint Using Welding Wire Containing 0.4% Nickel at Different Level of Heat Input
• Effect of Surface Treatment and Cutting Orientation to the Changes in Stents Surface Roughness
• Effect of Grain Size in Silica Blasting Processes on the Surface Roughness of Medical Grade SS 316L
• Analysis of Condensor Tube Thinning Distribution and their Failure Modes Based on Eddy Current Data
• Numerical Convergence in Wear Volume Prediction of UHMWPE Acetabular Cup Paired with cp Ti Femoral Head Hip Implants
• Fabrication Membrane of Titanium dioxide (TiO₂) Blended Polyethersulfone (PES) and Polyvinilidene fluoride (PVDF): Characterization, Mechanical Properties and Water Treatment
• Effects of Aluminum and Manganese Addition on the Microstructures and Mechanical Properties of Cu-29Zn Alloys
• Correlation of Holding Time and Bottom Ash Particle Size to Mechanical Properties of Polypropylene Composite
• Surface Roughness Characterization of Medical Implant Material SS316L Stainless Steel after Cut with Water Jet Cutting Process
• Non-Monotonous Effect of Adhesive Thickness on The Dynamic Stiffness of Adhesive Butt Joint
• Deformation Analysis of Internal Fixation Plate on Femur Bone Fracture: A Study Case on Local Raw
• Macro-Micro Analysis on 2-Layer Semiautomatic MIG Welding of AA5052 Material Using ER5356 Electrode
• Effect of Sulfuric Acid Concentration on the Corrosion Rate of ASTM A213-T12 Steel
• Influence of Thermal Cycling Temperature on the Recrystallization of Cold Rolled Stainless Steel 316L
• The Effect of Citric Acid Concentration on Corrosion Behavior of Austenitic Stainless Steel 316 L