Testing and Evaluation of Inorganic Materials II
Heftet /
2012
/ Engelsk
Produktdetaljer
ISBN
9783037852514
Publisert
2012-01-09
Utgiver
Trans Tech Publications Ltd
Vekt
1200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
29 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
580
The main theme of this special collection was that of materials properties and testing techniques, and covered most aspects of testing techniques as applied to the mechanical, chemical, physical properties and microstructures of ceramics, glasses and concrete. The book will be a worthy adjunct to the library of every testing laboratory
Les mer
Selected, peer reviewed papers from the Second Annual Meeting on Testing and Evaluation of Inorganic Materials, May 30 – June 1, 2011, Changsha, China
- Preface
- Development and Application of Test Equipment for Torsion Strength of Non-Metal Materials
- Relationship between the Ratio of Young’s Modulus to Hardness and the Elastic Recovery of Nanoindentation
- Analysis of Load-Displacement Curves of Ceramics Measured with Low-Load Vickers Hardness Test: Indentation Size Effect
- Fracture Behavior of SiC-TiB2 Composite Measured by Different Test Methods
- The Influence of Specimen Grips on the Measurement of Micro-Tensile Bond Strength to Human Dentin
- Influence of Multiple Firing on the Bending Strength of Zirconia/Porcelain Bilayered Dental Ceramics
- Comparison of Fracture Strength and Fracture Modes of Zirconia Dental Ceramics Manufactured by Four Different CAD/CAM Systems
- Fatigue Damage Modes of Bilayered Zirconia and Alumina Dental Composites
- Damage Mechanism of Short Carbon Fiber Reinforced SiC-Based Composite
- Evaluating Impact Properties of Cement Clinker at Different Angle for Impact Indentation
- An Experimental Study of the Nano-Scratch Behavior of Cement Composite Material
- Microstructure of Interface between Zirconia and Veneer Porcelain
- Effect of Temperature on the Interfacial Bonding Strength between PVB and Glass from RT to -50 °C
- Effects of Surface Treatment on the Microstructural and Crystallographic Changes of Dental 3Y-TZP Ceramic
- Mechanical Properties of Y-TZP Ceramic after Different Surface Treatments
- Evaluating Erosion of Engineering Materials Subject to Cavitation in Liquids on a Ultrasonic Vibratory Apparatus
- Evaluation on Structure and Tribological Properties of Carbon Nitride Films Deposited on YG8 Carbide Alloy Substrates
- Solid Particle Erosion Behavior of 3YSZ Ceramics at Elevated Temperatures
- Preparation of MgO-Partially Stabilized Zirconia Nano-Powder by Coprecipitation Pressing
- Method and Equipment for the Measurement of the Uniformity and Cohesiveness of Concrete Mixture
- Microstructure and Properties Evaluation of WTi(C,N)-06 Cemented Carbide with TaC and NbC
- Investigation of Microstructure and Mechanical Property of the Fe3Al/Al2O3 Composites Fabricated by Mechanical Alloying Process and Hot-Pressing Process
- Comparison of the Low Temperature Degradation Properties of Two Y-TZP Ceramics for Dental Applications
- Microstructure Characteristics of the Black-Glazed Shreds Excavated from the Qingliangsi Kiln
- Relationship between the Conductivity of Supernatant of 3Y-TZP Powder and Sintering Properties of its Ceramics
- Densification Mechanism of the Low Temperature Co-Fired Glass-Ceramic Substrate
- Lateral Confinement and Ballistic Performance of TiC-TiB2 Composites
- Ballistic Performance of TiC-TiB2 Composite Armour under the Impact of Long-Rod Tungsten Alloy Projectiles of 1.4 Km·s-1
- Microwave Sintering of SiCp/Al Composite
- Structure and Characteristics of Spherical-Pore Silicon Carbide
- Study on Surface Characterization and Properties of Three Dimensional Nano-Porous Titanium Film
- Preparation of Si-C-N-O Amorphous Films from a Polysilazane by Heat Treatment at High-Temperatures
- Synergistic Effect of Cr-Doped DLC Coatings and Lubricant Additives
- Preparation and Characterization of Nano-Films Materials
- Estimate of Thermodynamic Indirect Measurement on the Electrocaloric Effect
- Anisotropic Permittivity Measurement of Layered Inorganic Compounds
- Laboratory Testing of Piezoelectric Bridge Transducers for Asphalt Pavement Energy Harvesting
- Representation Methods for Microwave Absorption Ceramics
- Test Method and Equipment for Electrically Conducting Property of Ceramic/Carbon Composites
- Assessment on the Electrical Conductivity of Additive Fillers into Carbon Fiber-Cement Based Composites
- Preparation and Characterization of Lead-Free Piezoelectric Ceramics
- Dielectric and Piezoelectric Properties of Lead Free (1-x-y)Na1/2Bi1/2TiO3-xBaTiO3-yBiFeO3 Piezoelectric Ceramics
- Preparation and Characterization of Lead-Free Na0.54K0.42Li0.04NbO3 Nano-Powders by Sol-Gel Method
- Preparation and Characterization of BiFeO3 Film via Sol-Gel Spin-Coating Process
- Electrical Characteristics and Microstructures of Dy2O3-Doped Bi4Ti3O12 Thin Films
- Electrical Characteristics and Microstructures of Eu2O3-Doped Bi4Ti3O12 Ceramics
- Ferroelectric Properties of Bi3.25Gd0.75Ti2.97V0.03O12
- Preparation and Characterization of Textured CaBi4-XLaXTi4O15 Ceramics
- Electrical Characterization and Microstructures of Ce-Doped Bi4Ti3O12 Thin Films
- Ferroelectric Properties and Microstructures of Dy2O3-Doped Bi4Ti3O12 Ceramics
- Ferroelectric Properties of Bismuth Titanate Ceramics by Eu3+/V5+ Substitution
- Negative Resistance Behavior of Ferroelectric Bismuth Titanate Ceramics at Low Field
- Electrical Behaviors of Bi2WTi3O12 Ceramics
- Measurements of Thermoelectric Behavior and Microstructure of Carbon Nanotubes/Carbon Fiber-Cement Based Composite
- Synthesis of ZnO/MWCNT Heterostructure via the Self-Assemble Route and its Property
- Grain Growth in (Ga, Mn)-Codoped ZnO Ceramics
- Synthesis, Structure and Properties of Super Fine Zn2SnO4
- Synthesis and Electromagnetic Properties of Hollow Ceramic Microspheres
- Preparation and Magnetic Properties of α-MnO2 Nanoparticles
- Experimental Study on Magnetic Fluids Viscous Damper
- Analysis and Experimental Study on Magnetic Fluid Seal Mechanism
- Experimental Study of Surface Tension Coefficient for Magnetic Fluid
- Experimental Study of Large Gap Magnetic Fluid Static Sealing
- Design and Calculation of Magnetic Liquid Seal with Rectangular Pole Teeth
- Characteristics of TiO2 Nanotube Arrays on Titanium Prepared by Anodization
- Hydrogen Sensing Properties of Dye-Sensitized TiO2 Nanotube Array
- Low-Temperature Synthesis and Gas Sensing Properties of Anatase TiO2 Thin Films
- Discharge Relaxation of TiO2-WO3 Composite Nanotube Arrays
- Effect of Au Doped WO3 Gas Sensors for NO2 Detection
- Charactering and Sintering of BaZrO3 Doped with TiO2
- Fabrication and Photoelectrochemical Properties of CuO/TiO2 Heterojunction Nanotubes Array Film
- Luminescence Properties of Eu2+ Doped β-SiAlON Phosphor
- Solvothermal Synthesis and Characterization of Two Iron Complexes
- Evaluation of Thermal Performance for Vacuum Glazing by Using Three-Dimensional Finite Element Model
- Evaluation of Thermal Shock Resistance of Alumina Ceramics
- Thermal Decomposition of Dolomite Containing Phosphorus
- Study of Natural and Synthetic Quartz by Raman Spectra
- Testing and Evaluating Method of Dispersion of Carbon Nanotubes
- Measuring the Infinite Optical Thickness of Dentine Porcelain of the IPS E.max
- Contrast Ratios and Chromatic Value of IPS E.max LT Framework Materials
- Relative Translucency of IPS E.max LT Core Materials after Veneering and Glazing
- Soak Colored Zirconia Ceramics and its Colorimetric Plate
- The Correlation between Play-of-Color Effect and SiO2 Cavities Size of Australian Blue Opal
- Influence of Fe2+ on the Color Appearance of Yellow-Green Peridot
- Difference Analysis of Different Standard Illuminants on Yellow-Green to Green Jadeite-Jade
- Influence of Light Source and Cathodoluminescence on the Color Parameters of Ruby Red
- Measurement and Research of the Transverse Mechanical Properties of High Performance Fibers
- Study on Gemological and Mineralogy Features of Huanglong Jade
- Infrared and Visible Spectrum Study on Yellowish Green Peridot from Jinlin
- Intercalated Modification of Suzhoutu
- The Contribution of Co2+ to Blue Color of Synthetic Spinel
- A Study on Color Stones of Clay Minerals — Changhua Stone
- Reliability Evaluation of Glass Curtain Wall via Vibration Detection
- Phases Transformation of Boron Mud during Carbothermal Reduction Process
- Application of Argon Ion Beam Cross Section Polishing in Material Microstructure Research
- Effects of Internal Standards and Peak Profile Functions on Quantitative XRD Phase Analysis of Cement and its Hydrates
- FT-IR Study on Early-Age Hydration of Alkali-Activated Slag Cement
- Studying Blended Cement Paste with Nuclear Magnetic Resonance Relaxation Time
- Evaluation of Water Evaporation in Cementitious Materials by Low Field NMR
- Determination of Silicon Content in SiC Ceramics Precursor by Modified Titration
- Determination of Main Component and Purity of Oxide by Mass Balance of Difference-Determination for ZrO2+HfO2
- Assessment of Ultrasonic-Ethanol Extraction to Determine the pH Value of Hardened Cement Pastes
- Accelerated Carbonation Test Equipment of Concrete
- Data Acquisition and Control System of Hip Joint Simulator Based on LabVIEW and DSP
- Study on the Glassy Phase Composition of 95 Al2O3 Ceramics
- Phase Composition, Microstructure and Mechanical Properties of Aluminous Cements Containing Magnesium Aluminate Spinel
- Phase Behavior of Silica Brick Used in Carbothermal Reduction
- Influence of Temperature on Phase Composition of Nitridation Products from Rutile and Fly Ash
- Effect of Temperature on the Phase Behaviors of Zircon by Carbothermal Reduction-Nitridation
- Microstructure, Mineral Phases and Strength of the Foam Concrete
- True Density Measurement of Refractory by AccyPyc1330 Pycnometer
- Purification of Carbon Nanotubes Synthesized by Pyrolysis Flame
- Effects of Feed Shoe Wheel Speed on Tablet Weight Variability
- Permeability Characteristics of Human Dentin and a Porous Ceramic
- Biological Safety Assessment of a Colored Zirconia Ceramic: Hemolysis and Short-Term Systemic Toxicity Tests
- Biological Safety Assessment of a Colored Zirconia Ceramic: Cell Toxicity and Skin Sensitivity Tests
- Minocycline Modification of Gelatin-Hydroxylapatite Composite by Co-Precipitation Method
- The Anti-Erosion Properties of Pyrochlore Simulated Waste Forms
- Effect of Atomic Oxygen Exposure on Polyhedral Oligomeric Silsesquioxane/Polyimide Hybrid Materials in Low Earth Orbit Environment
- Preparation and Performance Test of Epoxy Modified Silicone Resins
- Establishment of Energy Efficiency Evaluation System for New Suspension Preheater Cement Enterprise in China
- The Analysis of the Function and Principle on Air Cooling PV Double-Glass Window
- The Prospective Analysis of Listed Ceramic Companies in China
- Stress-Sensitive Property of Carbon Fiber Reinforced Cement under Cyclic Load
- One Monitoring Device for Concrete Early Age Shrinkage
Les mer
Produktdetaljer
ISBN
9783037852514
Publisert
2012-01-09
Utgiver
Trans Tech Publications Ltd
Vekt
1200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
29 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
580