/

Materials, Mechanics and Information Engineering

Wongseedakaew Khanittha Luo Qi
Heftet / 2015 / Engelsk

Produktdetaljer

ISBN
9783038353850
Publisert
2015-03-25
Utgiver
Trans Tech Publications Ltd
Vekt
590 gr
Høyde
240 mm
Bredde
170 mm
Dybde
13 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
260

Redaktør
Wongseedakaew Khanittha
Luo Qi

Materials, Mechanics and Information Engineering

Wongseedakaew Khanittha Luo Qi
Heftet / 2015 / Engelsk
Wongseedakaew Khanittha Luo Qi
Heftet / 2015 / Engelsk
2.372,-
Laveste pris siste 30 dager: 2.372,-
Ikke i salg
Klikk og hent

Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Chemical, Mechanical and Materials Engineering (CMME 2014), October 24-25, 2014, Riga, Latvia. The 42 papers are grouped as follows:
Chapter 1: Materials Science and Materials Engineering;
Chapter 2: Applied Mechanics;
Chapter 3: Manufacturing and Mechanical Engineering;
Chapter 4: Computational Methods and Information Technologies

Les mer

Selected, peer reviewed papers from the 2014 3rd International Conference on Chemical, Mechanical and Materials Engineering (CMME 2014), October 24-25, 2014, Riga, Latvia

  • Preface and Committee
  • Chapter 1: Materials Science and Materials Engineering
  • Lightweight Gypsum-Based Material, Foamed by Lime Dust and Acid Agent
  • Experimental Researches of Fe-Cr Alloys and Cu-Zn Alloys Used for Microsurgical Instruments Manufacturing
  • First-Principle Study on the Structural Phase Transition, and Electronic Structures of Cobalt under Pressure
  • A New Pre-Treatment with Phosphoric Acid and Hydrofluoric Acid of Electroless Ni-P Plating on Mg Alloy
  • SEM-EDS Analysis of Composite Al2O3-ZrO2 Ceramics Eroded with SiC Particles
  • Research of Soldering Silicon Substrate with Solder Type Sn-Ag-Ti
  • Surface-Crosslinked Guar Gum-g-Sodium Polyacrylate Superabsorbents: Swelling Characteristics and Mechanics Performance
  • The Study of Cement Composites with Inbuilt Hazardous Waste
  • Selected Properties of Fiber Concrete after Heat Loading
  • Verification of the Possibility of the Use of Secondary Raw Materials of Tubular Solar Panels as Fillers of Polymer Industrial Floors
  • Heat Resistance Increase of Chromium Cast Iron by Modifying
  • An Investigation about Welding Parameters of Polypropylene Matrix Composite
  • Review the Research Trends and Application in Car Body of Aluminum Foam
  • L-Proline-Catalyzed Synthesis of Amino Thiazoles
  • Synthesis of α-Hydroxy Amides
  • Chapter 2: Applied Mechanics
  • Multi-Objective Optimization of Stacking Sequences for Laminated Composite Beams by Genetic Algorithm
  • Research Progress and Prospects for Vehicle Dynamic Stability Parameters
  • Review of Research Progresses in Unsteady Aerodynamic Model
  • Increase Pressure and Homogeneity of Die Castings from EN AC 47100 Alloy
  • Measurement of Physical and Mechanical Properties of High-Speed Heated Casting Cores
  • The Formation of Cracks in Cast-Iron Molds during the Casting of Zinc Blocks
  • Experimental Determination of Thermal Kinetic Parameters in Case Study of Tubes with Smooth and Structured Surface
  • Carrying Capacity Analysis and Numerical Simulation of Steel Reinforced Concrete Based on ANSYS
  • The Current State-of-the-Art in the Field of Material Models of Concrete and other Cementitious Composites
  • Chapter 3: Manufacturing and Mechanical Engineering
  • The Research on Thermal-Mechanical Coupled Analysis and the Lightweight Design of Engine Exhaust Valve
  • Simulation of Lateral Extrusion of Spline Form Based on the Software DEFORM-3D
  • Artificial Neural Network Modeling of Injection Upsetting Load Prediction
  • Study on Energy Balance of Three-Cylinder HCPE
  • Structure Principle and Property of Internal Combustion Stove
  • Simulation Analysis and Experiment Research on Vehicle Interior Adaptive Active Noise Control System
  • A New Steering-by-Wire System Driving by Electric Wheels
  • Failure Investigation of the Disc Harrow Profiles and Redesigning by CATIA Analysis
  • The Research Progress of Intra-Row Mechanical Weeding Technology of Dry-Land
  • Chapter 4: Computational Methods and Information Technologies
  • The Cloud Computing and the Application of Cloud Computing in the Telecommunication Enterprise
  • Signal Processing and Engineering Application of Ground Penetrating Radar (GPR) Based on Multi-Wavelet Transformation
  • A Complicated Transfer Design Method Based on Particle Swarm Optimization
  • Numerical Solution of the Nonlinear Wave Equation via Fourth-Order Time Stepping
  • Solutions for a Class of the Higher Diophantine Equation
  • Decreasing of Thermal Losses of the Light-Weight Building Envelope
  • Research on Scales Reflecting Cup Based on Scheme Macro Language Programming
  • The Cooling Principle of the LED Finned Radiator and its Heat Dissipation Theory Analysis
  • The Research of Improved Abnormal ECG Cluster Analysis Algorithm
Les mer

Relaterte produkter

Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Chemical, Mechanical and Materials Engineering (CMME 2014), October 24-25, 2014, Riga, Latvia. The 42 papers are grouped as follows:
Chapter 1: Materials Science and Materials Engineering;
Chapter 2: Applied Mechanics;
Chapter 3: Manufacturing and Mechanical Engineering;
Chapter 4: Computational Methods and Information Technologies

Les mer

Selected, peer reviewed papers from the 2014 3rd International Conference on Chemical, Mechanical and Materials Engineering (CMME 2014), October 24-25, 2014, Riga, Latvia

  • Preface and Committee
  • Chapter 1: Materials Science and Materials Engineering
  • Lightweight Gypsum-Based Material, Foamed by Lime Dust and Acid Agent
  • Experimental Researches of Fe-Cr Alloys and Cu-Zn Alloys Used for Microsurgical Instruments Manufacturing
  • First-Principle Study on the Structural Phase Transition, and Electronic Structures of Cobalt under Pressure
  • A New Pre-Treatment with Phosphoric Acid and Hydrofluoric Acid of Electroless Ni-P Plating on Mg Alloy
  • SEM-EDS Analysis of Composite Al2O3-ZrO2 Ceramics Eroded with SiC Particles
  • Research of Soldering Silicon Substrate with Solder Type Sn-Ag-Ti
  • Surface-Crosslinked Guar Gum-g-Sodium Polyacrylate Superabsorbents: Swelling Characteristics and Mechanics Performance
  • The Study of Cement Composites with Inbuilt Hazardous Waste
  • Selected Properties of Fiber Concrete after Heat Loading
  • Verification of the Possibility of the Use of Secondary Raw Materials of Tubular Solar Panels as Fillers of Polymer Industrial Floors
  • Heat Resistance Increase of Chromium Cast Iron by Modifying
  • An Investigation about Welding Parameters of Polypropylene Matrix Composite
  • Review the Research Trends and Application in Car Body of Aluminum Foam
  • L-Proline-Catalyzed Synthesis of Amino Thiazoles
  • Synthesis of α-Hydroxy Amides
  • Chapter 2: Applied Mechanics
  • Multi-Objective Optimization of Stacking Sequences for Laminated Composite Beams by Genetic Algorithm
  • Research Progress and Prospects for Vehicle Dynamic Stability Parameters
  • Review of Research Progresses in Unsteady Aerodynamic Model
  • Increase Pressure and Homogeneity of Die Castings from EN AC 47100 Alloy
  • Measurement of Physical and Mechanical Properties of High-Speed Heated Casting Cores
  • The Formation of Cracks in Cast-Iron Molds during the Casting of Zinc Blocks
  • Experimental Determination of Thermal Kinetic Parameters in Case Study of Tubes with Smooth and Structured Surface
  • Carrying Capacity Analysis and Numerical Simulation of Steel Reinforced Concrete Based on ANSYS
  • The Current State-of-the-Art in the Field of Material Models of Concrete and other Cementitious Composites
  • Chapter 3: Manufacturing and Mechanical Engineering
  • The Research on Thermal-Mechanical Coupled Analysis and the Lightweight Design of Engine Exhaust Valve
  • Simulation of Lateral Extrusion of Spline Form Based on the Software DEFORM-3D
  • Artificial Neural Network Modeling of Injection Upsetting Load Prediction
  • Study on Energy Balance of Three-Cylinder HCPE
  • Structure Principle and Property of Internal Combustion Stove
  • Simulation Analysis and Experiment Research on Vehicle Interior Adaptive Active Noise Control System
  • A New Steering-by-Wire System Driving by Electric Wheels
  • Failure Investigation of the Disc Harrow Profiles and Redesigning by CATIA Analysis
  • The Research Progress of Intra-Row Mechanical Weeding Technology of Dry-Land
  • Chapter 4: Computational Methods and Information Technologies
  • The Cloud Computing and the Application of Cloud Computing in the Telecommunication Enterprise
  • Signal Processing and Engineering Application of Ground Penetrating Radar (GPR) Based on Multi-Wavelet Transformation
  • A Complicated Transfer Design Method Based on Particle Swarm Optimization
  • Numerical Solution of the Nonlinear Wave Equation via Fourth-Order Time Stepping
  • Solutions for a Class of the Higher Diophantine Equation
  • Decreasing of Thermal Losses of the Light-Weight Building Envelope
  • Research on Scales Reflecting Cup Based on Scheme Macro Language Programming
  • The Cooling Principle of the LED Finned Radiator and its Heat Dissipation Theory Analysis
  • The Research of Improved Abnormal ECG Cluster Analysis Algorithm
Les mer

Produktdetaljer

ISBN
9783038353850
Publisert
2015-03-25
Utgiver
Trans Tech Publications Ltd
Vekt
590 gr
Høyde
240 mm
Bredde
170 mm
Dybde
13 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
260

Redaktør
Wongseedakaew Khanittha
Luo Qi

Relaterte produkter